old light morning light

Chapter 190 "89"

The annoying unified process, the earphones in the protective suit are constantly coming out of Le Biwan's voice, and he is explaining his work to me.

"...The following will tell you the dangers that exist in this work, please be more careful..."

Although the empire has also made strict requirements on these safety requirements, in most cases we are just going through the motions. Although we are not slaves, it is limited to this. Who cares whether a low-value consumable item Follow the safety rules, right?

But it is indeed different. The previous working environment was also on the ground, and even the maintenance of ship equipment was always in a shutdown state, and the safety factor was not the same.

That's okay, if that's the case, you should be more careful, how can you work while wearing such protective clothing?
"Lin Man?"

"do you understand?"

Ah, it seems like my name is being called. They should be able to hear this thing if I speak directly. There is no need to tune channels or anything like that?
"Ah, I understand!"

In fact, to be honest, I basically didn’t hear clearly what he said just now, except that the main task is to try to restore the working pressure of the main engine and not to get close to the tank when the pressure relief valve is working.

I admit that my alliance language is still far from perfect, but the communication quality of this communicator is also quite explosive.

In addition, what he just said was quick, so... but it is not a big problem to operate according to the safety knowledge learned in the empire before, right?
"Then the work begins, and you directly join Tiras' working group."

The semi-cross converter of Zeen Heavy Industry, the host machine does not know what manufacturer's product it is, but judging from the height of the maintenance platform on our floor, it should be assembled horizontally.

It is estimated that it is a confinement host of a sagittal column type, so what is leaking now may be the confinement medium and the magnetic fluid exchanger.

"Is this damn aerosol leak plugged now?"

But in this state, in addition to not taking advantage of it and blocking the line of sight, people like me can't even work effectively if we can't block the fluid leakage!
"Now that a leak has been found, and the sealing operation has just been completed, it is estimated that the sealing material has not yet been cured?"

I don't know whose voice it was in the communicator, but someone answered me anyway.

This row of cabinets should be front-end control cabinets, which seem to be connected with protection and control devices that are different from those of imperial ships.

Can this automatic device record the characteristic state of the fault?

Using the code table, I can't do anything without the corresponding operation code... okay.

But that's not right, if the damaged pipeline has been blocked, even if the material is not fully cured, it is impossible to still leak such a huge amount of liquid agent under this exhaust condition.

"Can someone tell me where you found the leak?"

"Bah...beep!"

The person next to me...what's the name of this person, don't care, he just turned his head and "looked at each other" with me just now, obviously he heard my question just now.

It's just that no one has answered me right now.

"It seems to be the DG21 circuit of cabinet 414?"

"Or DG314? Anyway, it's in cabinet 21?"

DG loop, straight feedback line?
As a feedback pipeline for automatic control and adjustment of flow, there should not be such a large leakage, right?

Besides, the damage and leakage caused by the direct impact of the inverter should also come from the main pipeline or process equipment, right?

So these guys got it wrong, right?
"呵~ Next we are going to replace the control module, do you want to stay with us or stay here?"

Are you talking to me?
Damn, the visibility here is really bad. If this goes on like this, nothing can be done. We need to find out what's wrong as soon as possible.

"I stay here!"

"Okay, if you have any questions, just drop us directly!"

Didi?

What the hell is Didi?

"okay!"

Maybe some kind of communication function?
Right now, I still have to try to solve the problem here. If this kind of thing doesn't concentrate on recovering, it is impossible to succeed if you just repair it on the left and right.

If we can restore power to at least one console, we at least have hope...

Although I really wanted to tell them this, but thinking that I was still just a foreigner, I swallowed the words that finally reached my mouth.

"Wait a minute, if you need tools or other equipment, where can you borrow them?"

"Uh, at least give me a universal calibrator or something?"

This is my bare minimum requirement, without which there is no way to check the flux and induction strength.

"If you need tools, they are all in the preparation room where you put on the protective clothing before. There is a tool cabinet there, and small tools and instruments are placed in it."

"Okay, thanks..."

"However, there are many working groups around here now, and many equipment and instruments may have been borrowed. You can only try your luck."

Thanks……

Well, although the scene was quite chaotic, the order on the scene was maintained fairly well, and perhaps because of the limited vision, the other staff around were also relatively slow in their movements.

The room just now... After I walked out, my vision recovered a little, but I always felt that my breathing became heavy.

I hope it's not because of inhaling too much harmful gas, but simply because of lack of energy?
After all, this suit is very heavy, and the torso is equipped with a plugboard that can protect a certain amount of explosive fragments.

I don't need the protection of this bullshit guard, I don't know if this guard can be removed... Well, it seems to be one piece, so I can only give it up.

Comet M3 flow column galvanometer, Wasser 711 handheld universal calibrator, I have to say that the tools distributed on this ship are quite expensive.

Although there was a set of basic tools distributed to each of us in the empire before, they were all cheap calibrators like Pampa 276 or Pampa 306, and they can only be used for the most basic and simple work...

Compared with these people in the alliance, they are really happy. The calibrators of Wasser 6 series and above can be directly connected to the network, and automatically integrate data to generate reports. It is not too convenient!

Fluid leaks, pressure decreases, transformation impedance increases, and core induction decreases.

Although the principle is very simple, but... a machine of this size is, after all, a serious cruiser main engine.

"Drip, drip, drip..."

The induction value is about 65fst, because there is a large amount of leaked gas in the nearby environment, and the environment already contains a considerable amount of free leaks, so the fluctuation of the current value is quite outrageous.

It would be nice to be able to use shield rings.

"Drip, drip..."

No, it's too slow to go on like this. Even if you have a flow column meter, you can't use the magnetic blowing method in this environment...

In order to restart the main engine, it is necessary to verify the functionality of the inverter first, so that the power can be output from the jump core through high-power streamer exchange.

Now that the inverter needs to be restarted, the constraints of the flow column must be ensured first, and the induction intensity seems to be generally expected to wait, which means that there should be no problem with the confinement field and the confinement agent.

Therefore, the leak should be the magnetic fluid exchange agent, and the occasions that need to use the magnetic fluid exchange agent should be complex and synchronous converters with extremely strong magnetic fields... The Sivir bridge, that is, the magnetic force bridge.

The induction intensity of the magnetic bridge...Although it is about 65fst, the induction frequency is difficult to maintain stable. Is it the wrong direction? The direction of the cutting head here is determined by the clock crossing method to determine the excitation polarity of the magnetic bridge...

Indeed, the induction frequency has been changing back and forth, which seems to contain distortion induction.

I seem to have some clues, but unfortunately the accuracy of the handheld universal calibrator is not satisfactory, otherwise I can find the location of the leak simply by relying on this.

The next step is to determine the polarity of the two ends of the magnetic bridge and the core column. The flow column connection characteristics of different polarities are different, the excitation frequency generated is also different, and the corresponding protection blocking and setting values ​​are also different.

If I remember correctly, the machine code for calling engineering data should be common throughout the universe?
SETx001001.

The pleasing "Unified Metering Contract"!
In the golden age of expansion before the Great Geographical Discovery, the "Galaxy Industrial Development and Progress Federation" once organized and discussed and signed a document that spanned the era, which stipulated a series of unified terms and basic common language for industrial science .

This pivotal document unified the pace of human progress in different regions and camps, brought about a golden era of industrial development, and indirectly promoted the subsequent era of great geographical discovery and space expansion.

This document is called... what is it called, but anyway, the abbreviation is called "Uniform Measurement Contract".

Process blueprints, installation blueprints, contact blueprints...

12柜连接的11和17柜，31柜连接的是34和36柜，其中12柜负责阳极流柱的造芯，而31柜负责阴极流柱的造芯。

Fortunately, the department-level blueprints used are common engineering languages. If they use private codes to write blueprints, it will not be so simple.

If you can determine a smaller range, maybe you can use the magnetic blow method to find the leak.

Now it can only be treated as a dead horse. Fortunately, this kind of converter is only a two-column hedging converter. If it is a three-column or four-column one, you can only look at the column and sigh.

Then I need a few people to help. What were they before Didi, and what happened?

"Hey, can anyone hear me?"

"Bah~beep!"

It seems that there is no response. I don't know what the communication mechanism of this built-in communicator is. Sometimes it will automatically switch channels, and sometimes there are other people around, but they can't communicate.

I have to find a way to "Didi" to Le Biwan's men just now, at least if the other party can't understand my intention, they can follow my instructions.

　In the past few weeks of continuous training, I have been waking up early for a month in a row, as if I am back in high school and I am too sleepy to extricate myself.

　　"I'm so sleepy that my brain goes straight to hell.JPEG"

　　
　
(End of this chapter)