My black technology will move by itself

Chapter 123 There is a problem with these five axes
"I'm short of money recently, and in this regard, I don't think I need to spend too much money. When the time comes, the cutting-edge equipment developed by myself can be shared domestically. How great it is!"

Lin Yun got an affirmative answer from Xiaozhi.

"Then do we still need to buy these five-axis?"

Yu Shuang didn't understand, and was greatly shocked.

"There must be a starting point! I will go back and study later. The precision of the five-axis machine tool is enough, and I will use some materials with sufficient performance. I don't think I will need to buy five-axis in the future. It will be profitable."

No kidding, Lin Yun said seriously.

"In the future, will we be able to build Hadron Colliders and the like?"

Yu Shuang made a little joke with limited knowledge.

"For the collider, it will take a long time."

The two faced each other in silence.

……

Leave early and return late.

The Lingyun Laboratory in Spring City has already taken shape, and all the basic facilities have been completed.

In a certain hotel conference room that has been built and is not open to the public, Lin Yun and the people from all walks of life who came for the five axes sat down separately.

Their perseverance is indeed good, they have all been chased here, and Lin Yun has to come to a formal negotiation with them out of overall consideration.

At the same time, there were several officials with considerable backgrounds.

It seems that Lin Yun met before when he was in Beicheng, the one from the Science and Technology Commission, Secretary Wu?
"Old Yang, you're in your seventies and eighties, and you're still fighting with young men, there's no need for that!"

As soon as Secretary Wu arrived, he began to look sloppy.

People in these companies don't know that Lin Yun's affairs are normal, but Secretary Wu is aware of Lin Yun's contributions, not to mention that he will point to Lin Yun's contributions in important fields in the future.

So in comparison, the field of machine tools for industrial production is not so anxious, and it is not a matter of a day or two to fall behind.

Deterrent power is the sharp weapon to ensure security and stability.

"Is this an indisputable issue?"

Yang Fengyun was so angry that he exploded.

"There are too many things that high-end machine tools can do, and I don't want all of them. A little bit of one or two is enough. When the time comes to make achievements, it will not be our collective benefit."

Patting the table, Yang Fengyun did not lose his composure completely.

This hotel is facing a confidential warehouse, and you can directly see the five-axis machine tools. This will be Sany Heavy Industry, which Yang Fengyun has the authority to arrange for several senior engineers to check the equipment, so that Yang Fengyun can be stable. Keep your posture and don't turn your face.

"How about that Lin Yun? Let's borrow your channel and see if we can get a batch back at a higher price. Everyone will be happy with it!"

Yang Fengyun was rather greedy, and never cared about the two five-axis machines.

He could tell that those five-axis machines seemed to be made in Germany.

Having worked in the machine tool field for decades, Yang Fengyun has a good eye, let alone high-end machine tools, Huaguoneng has not had much contact with it. Earlier, it was Japanese-made machine tools, and later only German-made machine tools were allowed to cooperate.

If you're not mistaken, it should belong to De Maji.

Not too high-end, but it can also be used as a reference for domestic five-axis.

It shouldn't be a taboo to make another batch.

Xiaozhi: [I did not consider the repurchase action when purchasing, there is an 86.25% probability that the location of the terminal has been discovered by the relevant organization! 】

The timely reminder made Lin Yun shake his head instantly.

"I can't figure it out, let's find another place!"

"How can this be impossible? It's not the top five-axis, it's totally fine..."

Before Yang Fengyun could finish speaking, he was forcibly pressed down by Secretary Wu.

"Speak up if you have something to say, what's the rush!"

Secretary Wu had a tiger's face, and his complexion was not very good-looking.

Don't say that he is a mere chief engineer of a state-owned enterprise, even Secretary Wu would be greedy for this kind of channel!
But Secretary Wu knows that one can do two and three can't do three, so he has to pay attention to this degree.

"I think it is better to carry out project cooperation and sharing within the agreed scope according to Lin Yun's previous proposal."

This is also a common practice, but Yang Fengyun and the others will be subject to a lot of constraints.

"How can this work together? We are going to study five-axis development, and we must disassemble it for a look at the end, otherwise I will trouble Lin Yun's laboratory to install it back when it is finished?"

This is not ridicule, Yang Fengyun is just revealing his original thoughts and plans.

In the development of new technologies, it is inevitable to pay a price.

"Then you apply and see if I approve it or not."

Lin Yun didn't speak, Yu Shuang first patted the table.

To deal with this kind of person, you can control violence with violence.

"Talk slowly, talk slowly!"

Secretary Wu is old and frail, and his mind is a little dizzy.

"Hey, you young people, do you understand the big picture? In the past two years, Sany and Shenjiqiyi, and some private companies have reached a new level in the research and development of the five-axis, and they are just a little short. At this juncture, you can't I'm not sensible!"

Changing the method, Yang Fengyun vomited bitterly.

The five-axis linkage CNC machine tool is easy to say, and it seems that there are domestic alternatives in the domestic search.

But if you really want to compare the accuracy and performance of foreign products, the difference is too much.

Where is the problem?
Isn't it because there is no stone to cross the river by feeling!

The words were earnest and thoughtful, and Yang Feng was talking back and forth, which made people feel upset.

"Mr. Yang, I found something unusual."

The inspecting engineer in the warehouse yelled, which immediately stopped Yang Fengyun and ran over.

"What's the problem? We have bought DMG's machine tools before. Looking at the sales of major high-end machine tools, they should not be malicious."

The scene eased slightly, and Lin Yun also looked over curiously.

"Maybe it's not abnormal, it's the CNC system in this five-axis machine tool, we don't know how to use it."

The engineer looked troubled.

In fact, the inspection of equipment is not complicated. You can roughly touch the periphery and the cover that can be opened, and then you can try it out, check the specific processing effect, and confirm the performance of the machine tool.

But the crux of the problem lies in the latter, which can't even be used, let alone how to copy the domestic non-high-end five-axis.

"How can you not use it! The German-made machine tools are imported by the group every year. Call back and ask a few responsible engineers to come over."

Yang Fengyun only thought that the few basic skills he brought over were not solid, so he said while getting started.

Normal machine tools will be updated every year, but the soup does not change the medicine, and the machine tools come and go according to the usage.

Wouldn't it be a joke!
It wasn't until Yang Fengyun clicked on the CNC interface that he discovered that this control mode was completely out of mainstream operation.

"You guys, what did you click on? Are these all garbled characters? Did you change one, did you not mess with the other ones?"

In just a few minutes, the corners of Yang Fengyun's mouth began to bubble and get angry.

If the people he brought destroyed this rare five-axis, Yang Feng would have to take their ashes away when he transported them back.

"No, absolutely nothing, all operations are recorded in the video, there is no violation."

After waving their hands again and again, the two engineers didn't mean to shirk their responsibilities, the problem was completely out of their technical scope, okay?

To understand based on their years of working experience, probably DMG, or the manufacturer behind the machine tool, encrypted the CNC system.

It is not impossible to solve it.

It should be possible to change the sleeve and use it?
(End of this chapter)