The Inheritance of Culture and Entertainment

Chapter 74 Earrings
After hearing this, Jingzhou understood.

The first game was actually about looking at pictures and making them.

It is equivalent to giving the design drawing and asking them to make the finished product according to the design drawing.

The test is about technology.

As for materials and tools.

It can also be done with universal affirmations.

The first game is purely to filter out those who are not technically competent.

It's really not difficult.

Jingzhou looked towards the center.

His position is closest to the center.

He clearly saw that the robot put aside materials such as gold and silver wire, gold and silver nuggets, and solder.

Spray guns, crucibles, hammers, clamps, molds, engraving tools, grinding tools, tweezers, clamps, etc. are placed one by one on the other side.

Basically, all the materials and tools needed for gold and silver joinery are provided.

Jingzhou could basically make a conclusion after looking at these materials and tools.

What needs to be restored should be gold and silver fine work.

But it shouldn't be too difficult.

Although those who make jewelry, especially vintage jewelry, basically master some gold and silver craftsmanship.

But after all, he is not a serious inheritor.

In competition, the requirements will definitely not be too high.

Jingzhou knew what was going on.

Since the materials were provided, he would definitely not take his own materials foolishly.

Wherever there are materials, it’s all money!
The free whore is definitely more delicious.

The drawing is shown in the center.

Jingzhou took a look, and then a small picture appeared above the table where he was.

You can adjust various angles and zoom in or out.

Jingzhou first took a look at the overall effect.

Then look at the details one by one.

Disassemble the accessories of each part and how to assemble and connect them.

From the first step, you can see how much you practice on a daily basis and everyone’s experience.

Some people rushed to get materials and tools as soon as they saw the pictures.

A few of them took all the materials and tools regardless of Sanqi 21.

There is no plan, just take it first and then talk about it.

Like Bai Changwen, when he saw the materials and tools, he roughly guessed the restored work.

When I see the picture, the first thing I do is not go get the materials, but I also look at the picture carefully.

For some that are not that powerful, just use a pen to trace the general shape and then disassemble the various parts.

Or list the general steps of the entire work.

According to the steps and accessories, find the corresponding tools and materials.

After all, Hu Que has been in the industry for many years, and he really learned from the master for a while.

The basic recovery steps are definitely clear.

She has also participated in many competitions.

However, in order to highlight her own strength, she added points during the production process to overwhelm Jingzhou.

Didn't even put pen to paper.

As he walked towards the center, he thought about the materials and tools needed.

This will inevitably lead to omissions.

But at this time she was full of confidence.

No matter what, you can’t lose in terms of momentum!
Jingzhou didn't care at all what other people did.

He basically simulated the production process in his mind.

Then he went to get gold and silver nuggets and solder.

Then there are various tools.

Basically, whatever is needed for gold and silver work is brought here.

This piece is a pair of earrings.

It's not big, but it's not easy to do.

Basic gold and silver craftsmanship, such as filigree, threading, bead frying, welding, hammering, etc., are all used.

Just no inlay.

Maybe the gems are too expensive.

Jingzhou did not use gold and silver threads.

He didn't know the toughness of the prepared gold and silver wire, and how many times it had been annealed and drawn.

It is easier to control by making your own.

The tools are complete and you can start from scratch.

Jingzhou started to smelt gold nuggets on its own.

For this piece, he decided to make it out of gold.

This saves the gold plating process.

Now put the gold nugget into the crucible and melt it with a spray gun.

Then pour into molds and cool.

Immediately afterwards, he held the gold bar with a clamp and began to beat it.

Hammer after hammer.

Change the angle from time to time to ensure even beating.Jingzhou swings the hammer with a certain rhythm.

He felt much lighter now.

Not like before.

You may lose strength after hammering for a few times and need to rest for a while.

Facts have proved that having a good body is really important.

Bai Changwen also chose to draw his own silk.

Some people are not so confident in their skills, so they directly choose ready-made gold and silver wire.

This will be faster and save time.

Moreover, they cannot guarantee that their drawing will be better than this.

There is no guarantee that you will be successful.

The earrings are very small, and the filaments required are even thinner.

If you don’t have certain skills, you won’t dare to challenge it.

For them, completing this work is enough to defeat many people.

There is no need to compare with the big guys in front.

Jingzhou's movements look very orderly and methodical.

The speed is not slow at all.

Even because my health is better, it is easier and faster to do it.

After beating several times, the gold bars become slender and uniform, and when they reach the maximum diameter of the wire drawing machine, wire drawing begins.

Time after time, I looked at it and pulled it, and the silk came over.

In fact, both strength and speed require good control.

This can ensure that the gold wire is drawn evenly and continuously.

He stopped this step only when the gold wire reached the thickness he wanted.

Then start rolling the thread.

Combine the two gold wires into one and twist them into a twist-like intertwined filament.

The tightness of the filament also needs to be controlled by yourself.

When the filigree is loosened, it is easy to fall apart and not look good.

If it is too tight, it will break easily.

After twisting the filaments, Jingzhou did not rush to filigree.

Instead, melt the gold nugget again.

Now you need to make the tire base.

Break out the gold pieces.

Then draw the drawing and cut out the shape of the tire base.

sanded.

After that comes filigree and welding.

The earrings are too small, and the filigree and welding tests your skills even more.

But this is no problem for Jingzhou.

After mastering filigree inlay, filigree and welding are all basic skills.

After the main accessories are done, do other decorative parts.

Cut off a small piece of gold, melt it with a spray gun, and explode the beads.

There are two ways to fry beads.

One is to drop gold solution into water to form gold beads of different sizes.

The other is to heat the gold shavings on charcoal. When they melt, the gold shavings are in the shape of dew drops, and they become gold beads after cooling.

In fact, it is to obtain solid gold beads.

Jingzhou doesn’t need to weigh it, just take the remaining filaments and cut them to the same length.

After the spray gun is melted, the gold chips gather in the shape of dewdrops.

Once cooled, they turn into little golden beads.

Take another piece of gold wire that has not been twisted into filigree and circle it around the wooden stick.

Try to make it as tight as possible so that it becomes a uniformly sized ring.

Cut out the ring in the same position.

It becomes a split ring.

The rings are interlocked and then welded to seal.

Just a gold chain.

Cut the required length and solder the gold beads on.

The tassel pendant is ready.

Then assemble it with the main accessories made before.

Finally make the ear hooks.

Use thicker gold wire to concave the shape and polish it constantly.

In case the ear hook is not smooth enough, it will be scratched.

The curvature also needs to be controlled by yourself.

The curvature is wrong and difficult to wear.

But Jingzhou has done a lot of ear hooks.

This didn't bother him.

Mainly these small accessories test your kung fu.

(End of this chapter)