After rebirth, I started a life of attributes

Chapter 214 The second chip, the robot is scrapped

Chen Feng and Li Nian stood in the center of the laboratory, their eyes focused on the computer screen in front of them.

What is displayed on the screen is the test data of the "Wisdom Heart" chip installed on the fourth-generation intelligent robot.

Data shows that this fourth-generation intelligent robot has perfectly unleashed the performance of its "intelligent heart" and mastered anthropomorphic behavior.

"A Feng, look, the fourth generation intelligent robot has fully unleashed the capabilities of the "Wisdom Heart" chip." Li Nian said excitedly.

"Yes, I didn't expect it to perform so well." Chen Feng nodded in agreement.

"Should we build a second smart robot equipped with this chip?" Li Nian asked.

"Of course, since the hardware and software have met the standards, of course we have to build a second intelligent robot as soon as possible." Chen Feng said.

As a result, Chen Feng and Li Nian began to build a second intelligent robot equipped with a "wisdom heart". They first need to purchase a large amount of hardware equipment, including processors, memory, hard drives, sensors, etc. Then, they need to write a lot of software code, including operating systems, application software, etc.

During the building process, they encountered some difficulties. The first is the issue of funding. Since their research project has not yet received sufficient funding, they need to solve the funding problem themselves.

In order to solve the funding problem, Chen Feng had no choice but to borrow money from his partner "Anta" and borrowed 3 million from "Anta" to build a second intelligent robot equipped with a "heart of wisdom".

Then there are the technical issues. Although they have successfully built the fourth generation of intelligent robots, they still encountered some technical problems in the process of building the second intelligent robot. The biggest problem is the failure of the one-nanometer lithography machine.

The one-nanometer lithography machine is a key equipment for creating the "Smart Heart" chip. If there is a problem with it, the entire project will come to a standstill. However, just as they started to build the second "Wisdom Heart" chip, the one-nanometer lithography machine suddenly broke down.

"Chen Feng, look, the data of the one-nanometer lithography machine is abnormal." Li Nian pointed to the data on the screen and said.

"Yes, I saw it too. This may be a problem with our building process." Chen Feng said with a frown.

They immediately stopped the building process and began checking for problems with the one-nanometer lithography machine. They found that there were some burn marks on the circuit board of the lithography machine, which may be the cause of the equipment failure.

"Chen Feng, look, this problem may be due to defects in our circuit design." Li Nian said.

"Yes, I think so too. We need to redesign the circuit to prevent this from happening again." Chen Feng said.

So Chen Feng and Li Nian began to redesign the circuit. They spent several days trying and tinkering until they finally managed to solve the problem.

However, after they solved this problem, they found another problem in front of them.

After the circuit board of the lithography machine was repaired, it still failed to operate normally, and the system of the lithography machine still showed "system abnormality".

"What's going on? Isn't the circuit board repaired? Why is it still abnormal?"

Li Nian frowned as he saw the words "System Abnormality" displayed on the display.

"Isn't it just that the circuit board is broken, but other places are also broken?"

Seeing that the circuit board was still not functioning properly after repairing it, Chen Feng wondered if other places were also broken, so he began to conduct a comprehensive inspection of the lithography machine.

However, when Chen Feng checked the lithography machine, he frowned.

"There is no second fault, so why can't it run normally?"

The mini lithography machine suddenly fell into a "crash" state and could not operate normally. Chen Feng and Li Nian both felt very confused and confused as to what went wrong with the lithography machine.

Faced with this situation, Chen Feng and Li Nian decided to dismantle the lithography machine and inspect the hardware and software one by one to find the cause.

They start with the hardware part. Chen Feng is responsible for inspecting various components of the lithography machine, including lasers, optical systems, controllers, etc., while Li Nian is responsible for inspecting the power supply system and cooling system. They carefully inspected every component but found nothing unusual.

Next, they started checking the software part. Chen Feng and Li Nian reviewed the program code of the lithography machine line by line, but still found no problems. They began to wonder if there was something they had overlooked.

So, they decided to check the hardware part again. This time, they focused on inspecting the core accessory of the lithography machine - "optical X-ray". When they opened the protective cover of the "optical X-ray", they found obvious burn marks on the circuit board inside. After some research, they determined that was the problem.

After repeated inspections, Chen Feng and Li Nian finally found the reason why the lithography machine "cannot operate normally" - there was a problem with the core component of the "optical X-ray".

"It's hard to figure out. How could the core of the 'Light X-ray' be damaged?"

After taking out the damaged "X-ray", Chen Feng looked sad.

"Light X-ray" is the core of a nanometer lithography machine. There is currently only one, and it is very difficult to make a new one. Not only is it difficult, but it is also very time-consuming and money-consuming.

But in order to create a second "Wisdom Heart" chip, they had to repair this core component first.

Therefore, they decided to invest all their energy and funds into the research and development of new "light X-ray" core accessories. They work day and night, constantly experimenting and improving, just to create more perfect accessories.

After months of hard work, they finally successfully developed a new "light X-ray" core accessory. This accessory uses more advanced technology and can better adapt to the operating needs of the lithography machine.

Chen Feng and Li Nian confidently installed the new core accessories on the lithography machine and then tested them. The test results showed that the lithography machine was operating very well and the accuracy reached the level they expected. After successfully repairing the "Light X-ray" core component of the one-nanometer lithography machine and creating the second "Wisdom Heart" chip, Chen Feng and Li Nian started their next goal non-stop - manufacturing the second Intelligent robots that can be equipped with "intelligent heart" chips.

In order to build this intelligent robot, they first have to design a complete robot structure. After months of hard work, they finally completed the design. Next, they need to translate the design into an actual product.

They began to search for suitable materials and personally participated in the manufacturing process of the robot. They work meticulously to ensure that every component fits together perfectly.

After months of hard work, they finally succeeded in building a second intelligent robot that can be equipped with the "Wisdom Heart" chip. This robot uses the most advanced technology and has super learning and adaptability.

In order to test how strong the anthropomorphic behavior of the two intelligent robots equipped with the "Wisdom Heart" chip is, Chen Feng decided to let the two intelligent robots compete in a PK of anthropomorphic behavior.

Chen Feng then gave the two intelligent robots two names: Apollo and Artemis.

The robot is named "Apollo", and it is set to be a male robot with handsome appearance and strong posture.

The second robot is called "Artemis", which is designed to be a female robot with a beautiful face and graceful figure.

In Chen Feng's laboratory, two intelligent robots stood face to face, their eyes shining with the light of wisdom. Chen Feng set a simple task for them: to make the other party admit their failure through anthropomorphic behavior.

Apollo was the first to attack. The corners of his mouth raised, revealing a confident smile: "Artemis, your beauty is indeed amazing, but I don't think you can defeat me."

Artemis smiled slightly, with a cunning light in her eyes: "Apollo, you are too confident. I have been strictly trained, do you think I will give in easily?"

Apollo laughed loudly: "Then let's have a fair competition! Let's see who can make the other party admit defeat first."

As a result, the two intelligent robots began a fierce PK of anthropomorphic behaviors. Apollo took full advantage of himself and tried to defeat Artemis in various ways. It sometimes showed off its knowledge, sometimes showed off its physical prowess, and even tried to impress Artemis emotionally.

However, Artemis is not an easy creature. It cleverly responds to every attack of Apollo, not only on par with Apollo in knowledge, but also giving Apollo a strong counterattack emotionally. During the fierce PK process, the performance of the two intelligent robots became closer and closer to that of humans. Their eyes, expressions, and tone of voice all revealed strong emotions.

The atmosphere in the laboratory became increasingly tense. Chen Feng watched the performance of the two intelligent robots and secretly marveled in his heart. He did not expect that the potential of the "Wisdom Heart" chip would be so huge, allowing robots to have anthropomorphic behaviors that are so close to humans.

Just as the PK between Apollo and Artemis entered a fierce stage, an accident happened suddenly. Because the anthropomorphic behavior of the two robots was too intense, the "Wisdom Heart" chip was overloaded and began to show signs of burning.

Chen Feng hurriedly cut off the power, but it was too late. The bodies of the two intelligent robots gradually lost their luster, and their eyes became hollow, as if they had lost their souls.

When Chen Feng opened the "Apollo" chip warehouse, the "Heart of Wisdom" had been burned.

Looking at the burned "Heart of Wisdom", both Chen Feng and Li Nian looked embarrassed.

They had no idea that the endurance of the "Wisdom Heart" chip that they spent a lot of effort and money to create would be so low. A simple anthropomorphic behavior PK would burn the chip.

"The durability of the first-generation 'Heart of Wisdom' chip was too low." Li Nian said in a deep voice.

Chen Feng nodded. He already had this understanding in his heart, but when he heard it from Li Nian, he still felt heavy in his heart. "Yes, we have to upgrade the durability of the chip and increase its service life."

The two looked at each other and saw the determination in each other's eyes. They know that this is their responsibility and a task they must complete.

In the following period, Chen Feng and Li Nian began a long period of experiments and research. They tried various methods to conduct a comprehensive analysis and improvement of the chip's materials, structure, and process.

They first adjusted the material of the chip. They chose materials with higher strength, higher melting point, and higher corrosion resistance to increase the durability of the chip. However, this brought about a new problem - the conductivity of the new material decreased. They had to find new conductor materials to ensure the normal operation of the chip.

"It seems that we must find a new conductor material to improve the durability and service life of the 'Wisdom Heart' chip." Li Nian said in a deep voice.

Chen Feng nodded, "That's true. If you want to improve the durability and service life of the chip, you must use materials with good conductivity and high durability."

In the next few days, Chen Feng and Li Nian began an arduous scientific research project. They read a large amount of scientific research literature, conducted countless experiments, and tried various possible materials.

However, no matter how hard they tried, they could not find a material that had both conductive properties and high durability. Every time an experiment failed, it was like a heavy hammer hitting their hearts hard.

However, Chen Feng and Li Nian did not give up because of this. They firmly believe that as long as they persist, they will find a solution to the problem.

In experiments after experiments, they gradually discovered some patterns. They found a correlation between the electrical conductivity and durability of certain materials. Therefore, they began to try to adjust and optimize materials according to these laws.

After countless attempts and failures, Chen Feng and Li Nian finally successfully developed a new conductor material-"Smart RX".

This material has excellent electrical conductivity and is highly durable and corrosion-resistant. After a series of tests, they found that the durability of "Smart RX" was nearly ten times higher than that of previous materials, while its conductive performance was not weakened at all.

After the new conductor material was developed, Chen Feng and Li Nian began to optimize the structure of the chip. They designed a more reasonable heat dissipation structure to prevent the chip from overheating. The thickness of the chip has also been increased to improve its impact resistance. However, this has brought about new problems - the weight of the chip has increased, and the load on the equipment has also increased. They had to redesign the structure of the device to bear the weight of the chip.

Finally, they improved the chip's process. They use more advanced manufacturing processes to improve the accuracy and stability of the chip. They have also increased chip testing to ensure that each chip can meet the design requirements. However, this has brought about a new problem - the manufacturing cost of chips has increased. They have to find new manufacturing processes to reduce the cost of chips.

After countless trials and failures, Chen Feng and Li Nian finally successfully developed a new generation of "Wisdom Heart" chips. The durability of this chip is ten times higher than that of the original chip, and its service life is also greatly extended.

(End of this chapter)