Siheyuan: My Northeastern Farmhouse

Chapter 279 I admire you so much! (Transitional Chapter)

Gu Weijun returned to the president's office of Imperial Chemical again and directly picked up the phone to call Constance. A servant's voice came from the other end of the phone, saying that the lady had taken a rest.

Gu Weijun didn't force himself to wake up Constance, and asked the servant to tell the textile guild that there would be news from Hong Kong tomorrow, so he asked Constance to take it directly and tell other people in the textile association that I, Gu Weijun, took it!

Unexpectedly, after Gu Weijun sent Comrade Liu off to the plane the next day, he met Constance at the airport who had just gotten off the plane.

"Oh! My dear!" Constance ran straight to Gu Weijun like a baby swallow.

The two didn't mind the eyes of others at the airport and started kissing passionately, and there was good-natured applause around them.

It wasn't until Constance was out of breath that the two separated, "My dear, this must be God's arrangement!"

"That's right!" Gu Weijun fondly touched her head, "In such a busy airport, with such a busy flow of people, it must be God's arrangement for us to meet here!"

Constance couldn't help but kiss again, and after that, the two left the airport arm in arm and went straight to the hotel.

"Oh!"

Constance lay on Gu Weijun's chest and murmured, "I'm so happy!"

"Me too!" Gu Weijun responded with a smile and an embrace.

At this moment, Constance remembered the business of her trip, "Dear, the maid told me this morning that you called me to talk about Hong Kong?"

"Well, that's right!" Gu Weijun simply told the story. He discovered that the British were spying on his group, and then he used his plan to release false news, which prompted the British to make changes and actively approached the French Textile Association to open a factory in Hong Kong.

After listening, Constance was smart enough not to ask for details, but instead asked: "Dear, does this require a lot of money?"

Gu Weijun smiled domineeringly, "Have you forgotten the New China behind me?"

"I will go to Hong Kong and bring it to you secretly."

"Just arrange for someone to take charge of opening the factory!"

"Moreover, this will also be a great boost to your family's career."

"That's right!" Constance nodded in agreement and flipped her hair, "It happened that when my mother was managing the family business, several of her confidants had been marginalized. They were all very experienced, so it was just right for them to do this! "

"I'll talk to them when I get back."

After meeting her lover and relieving her lovesickness, Constance immediately returned to Lyon, France. After finding her mother and her cronies, she patiently waited for the news.

Sure enough, three days later, on August 8, someone from the UK found the textile guild in Lyon and invited them to open a factory in Hong Kong.

To Gu Weijun's surprise, the Lyon textile guild ignored the British suggestions at all. What art and clothing did the British know? Also invited to Hong Kong, a colony in the Far East? Isn't this a joke?

With the shamelessness of the British guys, maybe they have some evil plans?

As a result, Constance easily obtained this ticket. Of course, it was not just herself. She also contacted Catherine and several others. She could not bear the heavy Chinese artillery alone.

After telling them that Gu Weijun would go to Hong Kong in a while, the girls immediately packed their bags and went to Hong Kong with joy, and settled into the Peninsula Hotel. What kind of business? Wait until my man comes

At this time, Gu Weijun followed Team Leader Fang to Nuremberg, a small town in the Baroque state of West Germany.

I have to say that the Germans are really old-fashioned and boring. The entire procurement negotiation process is very strict. All the conditions are laid out and discussed with you one by one, and they are not willing to give in easily!

The first requirement is that it cannot be used for military purposes.

We also check the usage of the equipment from time to time every year.

After all the conditions are agreed upon with you, the asking price is US$800 million!

At this price, it is only a mid-to-low-end CNC machine tool.

Not to mention five-axis, four-axis will not be sold to you, at most it will be three-axis.

Hey, at this price, it’s really irritating that the Germans are like, do you want to buy it or not?

In order to introduce CNC machine tools, Team Leader Fang could only endure it. He kept emphasizing in the negotiations that there were other options. The machine tools in Switzerland were not bad. Moreover, the two countries were friendly. Diplomats from both countries had just arrived in Switzerland. It conveyed the voices of the two peoples urgently communicating.

And we still have follow-up purchases, etc., and have to deal with difficult price saws.

The Germans are straightforward. With Batumi here, Switzerland does not dare to sell machine tools to you directly. We only took action after the two sides contacted each other at the Swiss diplomatic embassy. Otherwise, how could we risk offending the United States.

Aren't you just trying to make money? Of course, Team Leader Fang didn't say this. When it came to this, he had no trump card.

On the first day of negotiations, Team Leader Fang had a dark face throughout the entire negotiation. After returning to the hotel, he also frowned and smoked cigarettes one after another.

Only then did Gu Weijun truly realize the difficulty of introducing technology and equipment.

To be honest, for Gu Weijun, the food in West Germany is not bad. The big sauerkraut elbow and sausages satisfy his Northeastern stomach. Moreover, he has nothing to do this time. The company in West Germany is completely terrible. The attitude of whether to sell or not.

Gu Weijun could only reluctantly be a gentleman again, find the database of Demaji Machine Tool Company, and borrow all the information. Then Gu Weijun became a little discouraged.

As an industrial base machine, machine tools have too many parts that need to be improved. The first is the raw material part. The performance strength required by each component of the machine tool, especially the spindle and cutting tools. In addition, for the stability and precision of the machine tool, the stress in the metal materials used to manufacture the machine tool Also need to be eliminated.

For example, the metal material of the base needs to rest for many years before it reaches the standard or there is a special elimination chamber. There is no domestic reserve for this. Even if Gu Weijun copies the machine tool by then, the performance will definitely be far inferior.

But it’s better than nothing, right?

This is still a mechanical part, which can be easily processed. With these information, Gu Weijun will have no problem in copying it.

But the core of CNC machine tools is CNC, which is programming, and it is also the most difficult part. Gu Weijun doesn’t understand this, and there is no USB interface for programming everywhere.

What the hell is going on? Even if Gu Weijun has a photographic memory and has memorized all the codes, will he have to learn one more subject after returning to China?

There is a serious shortage of programmers in China right now, and several universities, including Tsinghua University, have computer majors!

Fuck, I originally planned to enjoy happiness when I returned from time travel, so why did I end up in this situation step by step?

No wonder our high-end machine tools in later generations are so tired of catching up.

When we return to China, there will be another field of machine tools where we can show off!

I don’t know how the production line of Second Automobile is going? I guess it won't be so soon, I've only been out for more than a month.

During the entire period in West Germany, Team Leader Fang was gloomy and could not negotiate the price twice.

Gu Weijun didn't dare to make jokes in front of him, and carefully prepared various materials every day, but a turning point soon appeared.

Gu Weijun discovered another machine tool company called TRUMPF in Nuremberg. He then sneaked in to borrow materials and found out, holy shit, this company's technology is better than the one we want to buy this time?

Fortunately, Gu Weijun studied physics and then mechanics. After he continuously borrowed research materials from TRUMPF Machine Tools and Demag, he provided Team Leader Fang with several confusing technical materials.

Even with the corresponding data for comparison, after four consecutive days of difficult negotiations, the team leader finally introduced a full set of technical data on mid- to low-end CNC machine tools and several horizontal and vertical machines at a cost of US$4 million. Type and compound three-axis intermediate CNC machine tools.

Originally, Gu Weijun remembered that a novel he had read in later generations stated that the Western art oil paintings in an apartment in Munich, Germany were hidden by the Nazis. During this period, he also considered going to pick up the goods, but later he did not dare to mention it when he looked at the black face of Team Leader Fang. .

Anyway, those works of art worth 10 billion were only discovered in 2010, so there was still time.

Loaded with information, Gu Weijun and Team Leader Fang flew to Hong Kong.

Hey, here I come.

(End of this chapter)