Siheyuan: My Northeastern Farmhouse

Chapter 295 This is what a man should do

On Tuesday, before Gu Weijun had finished drawing the manufacturing drawings of the machine tools, Director Li and Chief Engineer Ye from the Beijing No. 1 Machine Tool Factory came together again.

Along with it, there was also a large cart of watermelons, pulled by a horse-drawn carriage.

The two factory leaders arrived at the teaching and research group of the Mechanical Department first and handed out watermelons to everyone they saw. After confirming that nothing was left out, Director Li slapped his chest hard and said in a loud voice that could be heard two miles away: "For no other reason than the weather is too hot, our factory The watermelon bought in Pangezhuang has been delivered to Gu Gong and the teachers to cool down and quench their thirst."

"Of course, by the way, when will our machine tool development officially start?"

"Let's prepare in advance, shouldn't we? We can only wait for the professors. How can we make the teachers wait for the machine tool factory? How precious is the time of teachers?"

"What, Gu Gong is not here? Library?"

"Hey, the library is a place that we, the old man, particularly yearn for!"

Seeing factory director Li Zhenshun standing in front of him with a smile on his face and holding a watermelon in his hands, with wrinkles on his face, Gu Weijun could only give him a secret thumbs up in his heart! At this level, he will become an outstanding top salesperson in future generations.

Gu Weijun led the two of them to his seat in the library, pointed at the drawing, and said softly: "Director Li, Chief Engineer Ye, the drawing has only been drawn less than 1/4, and this is only the first draft. Finish it." After that, I will have to ask Director Li Jixiang of the Department of Mechanical Engineering and other teachers for advice before I can give them to you."

"After that, we have to confirm with Teacher Wang Erqian from the Department of Electronic Mechanical Engineering about the matching of integrated circuits and the corresponding control programs."

"Only in this way can this CNC machine tool be initially developed."

"What follows is a long usage test."

Factory Manager Li gently put the watermelon on the table, touched Manager Ye lightly with his elbow, continued to smile, and replied in a low voice: "What did Engineer Gu say? Isn't this just a coincidence?"

"The watermelon from Pangezhuang is so good. It's sweet and gritty when it comes out!"

General Manager Ye had already picked up the drawn drawings and looked at them carefully. He kept nodding slightly, directly interrupting Director Li's follow-up words, "Mr. Gu, this is a little different from what you originally wrote on the blackboard." identical?"

"Have you made any changes here again?"

"Would it turn your head faster if you do this? It would be tens of thousands of times, right?"

"Can this alloy knife head hold up?"

Seeing the two people cooperating seamlessly, Gu Weijun smiled and explained in a low voice, "General Manager Ye, I have given the alloy formula to Shougang. The smelting should have started in Shougang's test workshop, and there are more than just this kind of drilling bits. Alloys and other cutting alloys are also smelted simultaneously.”

Factory Manager Li slapped his thigh, his hoarse voice could no longer be suppressed, and the air around him buzzed, "Oh, I said Gu Gong is a great talent!"

"In just a few days, the alloy formula for the knife has been finalized!"

"Don't just bother the masters at Shougang. The masters at our No. 1 Machinery Factory are also looking forward to the stars and the moon. We have long wanted some alloys that are particularly suitable for making knives!"

"If not, could you please write it down?"

"Oops!" Director Li gave himself a small mouth directly, "Look at me, I have forgotten that the most important thing you have now is to draw the drawings of the CNC machine tool!" "In this case, please tell Shougang Just tell me over there, and Lao Ye and I will go get the scriptures right away."

After speaking, Factory Director Li and Chief Engineer Ye both looked at Gu Weijun with expectant eyes.

Gu Weijun smiled brightly and said, "You two leaders are so polite. What's the trouble?"

"Come on, I'm going to make a call right now."

"Oh, thank you so much, Gu Gong!" Director Li smiled so hard that his teeth were exposed.

After making a call to Shougang and seeing off Director Li and Chief Engineer Ye of Beijing No. 1 Machine Tool Factory, Gu Weijun threw the watermelon he sent back to his dormitory and returned to the library again.

Gu Weijun met Director Li twice and found out that this leader is a person who is willing to put down his body to achieve his goals. If you don't get it to Shougang quickly, this leader will be eager to tie you to his side and watch you work until final result

On the other side, Director Li and Chief Engineer Ye arrived at Shougang's test workshop and looked at the test results of several newly smelted alloys by the masters. They were overjoyed, as if a fox had fallen into a henhouse!

This performance is also great! And it’s not just the alloys of cutting tools, but also the alloys of the main structure of machine tools, especially ductile iron. This performance is very suitable for machine tools.

To steal a teacher, you have to steal a teacher. Director Li asked Mr. Ye to stay and watch the process of alloy smelting. He called several other young technicians from the machine tool factory over with just one phone call. Let's learn smelting together.

Of course, Gu Weijun only found out about this later. Director Zhou of Shougang commented on Director Li of No. 1 Machinery Factory that this old boy was more like a bandit than me, and even stayed in my workshop without leaving.

And I also want to poach my master of smelting ratio.

After seeing off Factory Director Li and Chief Engineer Ye in the library, Gu Weijun put aside the machine tool drawings he was drawing, pondered for a while and then began to draw a new graphic, an overview of the production line.

In fact, Gu Weijun has already drawn a machine tool drawing, which is a single-drilling non-CNC machine tool. Because the main body of the engine has many holes, the secondary processing is particularly time-consuming and laborious. Moreover, the previous engines and the Second Automobile Group used integrated molding, but the hole diameter standards did not actually meet the required standards.

Not only the engine, but also many parts of the light truck system are processed a little bit, and they are not up to standard.

But Gu Weijun knows very well that if the domestic manufacturing industry wants to continue to develop further, it must be standardized!

Only through standardization can industry realize the possibility of large-scale industry. Otherwise, Beijing Second Automobile Company produces 4000 light trucks a year, which is already at full capacity!

When later generations of Santana were domestically produced, it was said that only 3% of the parts could be produced domestically at the beginning, which was still the simplest part. This reason is actually related to the fact that our country's initial industrial base was modeled after the Soviet Union. The old man can only use one word, "rough!" Anyway, it can be used.

Therefore, Gu Weijun's improvement of the production line of Beijing Second Automotive Industry Co., Ltd. is not only to provide machine tool optimization processes, but also to set some standards, and more importantly, to drive the standardization of the entire domestic automobile industry.

During this period, with a guiding document like the Anshan Iron and Steel Constitution, it was also the period when standardized production was most effective.

Therefore, others thought that Gu Weijun was not entirely right when he drew the machine tool drawings. He was still constantly revising the production process drawings of the light truck production line, with the primary goal being to achieve standardization.

Only after standardization can the production of light trucks in the assembly workshop be increased.

Time passed quickly while Gu Weijun was studying in the library, the Department of Mechanical Engineering, and the Department of Electronic Computers. Except for September 9th, the night of the Mid-Autumn Festival, Gu Weijun made a temporary trip back to the Nanluoguxiang Courtyard to have a meal with his family. reunion dinner.

On Sunday, students from the Department of Engineering and Materials were shocked again when they saw Gu Weijun, the factory director and the chief engineers holding drawings and pointing at the engine production line to optimize it in the workshop of Beijing Second Automobile Works!

Although I knew before that Gu Weijun had been integrating theory with practice in front-line labor, I thought he was just doing odd jobs like them, learning and operating skillfully from the master workers.

But looking at this posture, Gu Weijun looks like a master of technology!

This crowd of people shouting and supporting each other is so majestic!

At this moment, one thought emerged in the minds of all the students: This is what a man should be!

Until September 9th, Yang Yu ran to Tsinghua University out of breath. After finding Gu Weijun, she pulled him away and said, "Junzi, hurry up!"

"quick!"

(End of this chapter)