Siheyuan: My Northeastern Farmhouse

Chapter 318 What is supposed to come will come (today’s update)

Alone Better Together!

How can students be left out of this kind of thing to improve their learning?

Wang Ergan decisively led Gu Weijun to the computer dormitory, pulled the sophomore students out of bed one after another, and then shuffled towards the laboratory.

In particular, Wang Erqian paid special attention to equality between men and women. Female classmates also did not let them go, and asked the aunt in the dormitory to take them down.

Along the way, it can be said that the whole country is filled with mourning.

That night, Gu Weijun's reputation as a beast spread throughout every corner of Tsinghua University.

At this time, computers were mainly integrated circuits based on transistors, and storage was magnetic cores. Included in the list of technologies imported from abroad this time were electronic computer equipment and technologies, which also cost the country a lot of foreign exchange.

Wang Erqian nailed the drawings directly to the wall with four nails, then rolled up his sleeves and began to divide the work. Those who soldered transistors, those who soldered circuits, and those who soldered resistors. The division of labor was clear.

That night, the laboratory of the Electronic Computing Department of Tsinghua University was brightly lit. At five o'clock in the morning, the computer equipped with a milling machine provided by Gu Weijun was finally completed, and then Gu Weijun entered the programming with a crackle on the keyboard.

Until 6 o'clock in the morning, you're done!

Gu Weijun stretched out and looked at Teacher Wang and the students who were sleeping in the computer laboratory with an embarrassed expression.

However, the squeeze had to continue. Gu Weijun secretly took out another computer design drawing from the space, nailed it to the wall again, held the CNC computer in his hand, and then quietly left.

If future generations of comrades see this thing, they probably won’t think it is a computer, but a semiconductor!

Yes, it is actually very similar to semiconductors. I don’t know where else, but Gu Weijun has always called radios semiconductors in later generations. I don’t know where it came from?

In other words, Gu Weijun's physical strength was at its maximum, so he could carry the computer, which weighed more than ten kilograms, for almost a mile before arriving at the school gate where the jeep was parked.

After gently placing it in the back seat, Gu Weijun gently turned on the ignition and refueled, and drove cautiously towards No. 4 Jianguomenwai Street, the No. Machine Tool Factory in Beijing.

Then after returning to the police room, he quickly asked people to find Factory Director Li and Chief Engineer Ye.

Manager Ye was also very excited, his voice trembled, "Okay, I'll go to the family area to call someone!" Then he ran away as fast as flying.

No wonder Director Li is so concerned about talents and technology. First, many technical backbones have been relocated; second, new construction projects have also been stopped, which is a very big blow to the development of Beijing No. 1 Machinery Factory. .

Gu Weijun parked his jeep outside the last workshop and took a stroll in the factory. Actually, he wanted to see how the No. 5 Machinery Factory had implemented the five management items he had told him last time. Let’s take a look. Later Gu Weijun was very satisfied!

"Really!" Director Li's eyes instantly widened, pulling away the wrinkles at the corners of his eyes, and then he quickly smiled like a flower. He could no longer suppress his loud voice, and his laughter resounded throughout the factory, "Haha, Gu Worker, I knew you were definitely this one!”

After answering Gu Weijun's question, Factory Director Li rubbed his hands together with enthusiasm and a bit of nervousness, "Gu Gu, did you see the boring machine we sent to Beijing Second Automobile Works?"

"Are you here this time?" After speaking, Director Li looked at Gu Weijun with hope in his eyes.

I didn't notice it the last time I came here. The area of ​​this Beijing No. 40 Machinery Factory is quite large. It is estimated to be nearly 1 square meters. A quarter of it has been built with workshops and factory buildings. However, it is obvious that many of them were only built half way before they were stopped.

"Not only our factory, but also the workers and masters of the Second Automobile Works Group in Beijing were full of praise after the operation. They have already submitted a report and asked us to make a few more units!"

It turned out that in May 65, in conjunction with the third-line construction, nearly 5 employees and 700 pieces of equipment moved into the Changzheng Machine Tool Factory in Zigong, Sichuan.

Gu Weijun pointed to the jeep in the distance and smiled slightly, "Director Li, Chief Engineer Ye, I brought over the drawings of the three-dimensional gantry milling machine and the supporting CNC computer, and they are all on the jeep."

"If this CNC machine tool succeeds, we will make history!"

At this time, the Beijing No. 1 Machinery Factory had not yet started working. The guard at the door saw that it was a young comrade driving a jeep. He stepped forward to ask. When he heard that it was Gu Gu from Tsinghua University, he was overjoyed. Now Gu Weijun is working at the Beijing No. 1 Machinery Factory. The celebrity opened the door directly and let Gu Weijun enter the factory.

Just as Factory Manager Li arrived, Gu Weijun raised his doubts.

Factory Director Li gave a thumbs up and pulled Gu Weijun towards the jeep, "Old Ye, hurry up and summon the workers and masters, let's get to work quickly!"

Factory Director Li Zhenshun and Chief Engineer Ye arrived very quickly and arrived at the factory in less than 10 minutes.

Then he gave a thumbs up and said, "Gong Gu, the boring machine you designed is amazing!"

Director Li suddenly thought of the research institute in the factory and shouted to Chief Engineer Ye who was leaving: "Old Ye, call the comrades from the milling machine research institute!"

"Know!"

Soon, the technicians and master workers arrived. Director Li asked the canteen to deliver breakfast directly, and everyone ate breakfast directly in the workshop while listening to Gu Weijun explain the drawings. Milling machines are the flagship product of the No. 1 Machinery Factory. After Gu Weijun explained the working effects of CNC machine tools, all the workers and masters were very motivated and gearing up.

Because the heavy-duty gantry milling machine Gu Weijun borrowed from has a gantry width of 2.5 meters and a workbench length of 3 meters. Its functions are so powerful: double rectangular guide rails, ball screws, pneumatic broaches, frequency conversion speed regulation, three-axis tool setting, and repeated positioning. .

Without any instructions, the workers and masters in each workshop consciously divided the drawings, and then began to discuss production adjustments in groups!

Gu Weijun and Chief Engineer Ye brought technical comrades from the Milling Machine Research Institute to participate in discussions in groups and provide timely answers to technical questions.

During the whole process, Gu Weijun's abundant knowledge reserve impressed Mr. Ye and the technicians from the Milling Machine Research Institute, not to mention the master workers. From then on.

At lunch, Gu Weijun also held a lunch box and discussed production with the workers and masters while eating.

For the whole day, Gu Weijun stayed at the No. 1 Machinery Factory. After straightening out the entire production process, he went to the Second Automobile Works Factory in the capital without stopping.

Because the supply of light trucks exceeds demand, Beijing Second Automobile Works now operates two shifts. Liu Feng, the former director of the machine repair shop and now the director of Beijing Second Automobile Works, took the initiative to take on the heavy responsibility of the night shift. The reversal of day and night did not make Director Liu mentally depressed. Instead, he was in high spirits and spent every night on various production lines.

The new boring machine has been used in the engine production line, and the workers who operate it are full of praise.

Because the engines are all sand cast and have a large number of hole diameters, the secondary processing is mainly smooth inner walls and standard hole diameters. With this boring machine, the hole diameter processing efficiency can be more than doubled.

The workers joked again, "Gu Gu, hurry up and get a grinder, so that we can increase the efficiency of processing the inner wall of the engine!"

"No problem!" Gu Weijun promised with a smile.

We men must do what we say, what is a grinder? Little CASE!

Gu Weijun started to go to the teaching and research office of the Department of Mechanical Engineering frequently again. First, he found out the information about the grinder from the space information. If he didn’t understand, he asked, and soon he learned about the CNC coordinate grinder.

Then I contacted the Beijing Second Machine Tool Factory. Director Li Sheng of the Beijing Second Machine Tool Factory was overjoyed. This is a great credit!

Cooperate, you must cooperate fiercely!

Director Li Sheng directly gathered the technicians and senior workers of the No. 5 Machinery Factory to listen to Gu Weijun explain the machine tool structure. Then he asked Gu Weijun to talk about S management and immediately rectified the factory area.

The second machine factory must implement CNC machine tools before the first machine factory!

The first machine factory was furious after hearing this. You, a second factory branched off from our factory, still dare to compete with us for first place?

Comrades, follow me! Factory Director Li Zhenshun and Chief Engineer Ye rolled up their sleeves and took the lead!

At this point, Gu Weijun successfully brought Juan's spirit from Tsinghua University to several factories in the capital, and started his career as a troublemaker. Bah, he was brave enough to brave the wind and waves.

The changes in Jingcheng Second Automobile Works were soon known to Jingcheng Automobile Factory, and they felt like they were facing a formidable enemy!

Without Jingcheng Second Automobile, I would have a reason to be bad, but why do you have to be so good? Isn't this a slap in the face?

We have already produced according to the technical drawings you provided, what else do you want?

Isn't it just that there is no gearbox and no synchronizer? It doesn’t affect shifting!

Isn’t it even the steering wheel without a power assist system? Doesn't it affect driving?

Isn't it just leaking wind and rain? Isn't this normal?

Isn't it just that there is no rolling window? We can break it off with our hands.

Secretary Feng immediately contacted the Jingcheng Agricultural Machinery Factory and the Gear Factory to communicate secretly, asking them to hold off on the orders from Jingcheng Second Automobile Works and supply all to the Jingcheng Automobile Factory.

When Gu Weijun heard the news, he was dumbfounded. No wonder the 212 car in later generations had such TMD roots.

Gu Weijun suddenly thought and asked Liu Feng to go directly to the other branches of the North China Auto Repair Factory.

Without Butcher Zhang, can we still eat pigs with hair on them?

joke! Second Automobile Works is originally the foundation of North China Auto Repair Branch No. 2, so we don’t have a small group.

I have Shougang on the left providing various alloys and other raw materials, and there are two machine tool factories in Beijing on the right making machine tools. What production resources cannot be arranged?

Directly report to the first branch factory to modify the engine, the third branch factory to modify the bearing transmission, and the fourth branch factory to modify other gears. Who doesn't know how to integrate?

In the next few months, in addition to going to Yanqing County every month to deliver some supplies to Jiang Wanhua and the three girls, and chatting with Secretary Hu to cultivate relationships, Gu Weijun almost focused on the production and design of the supporting factory of Beijing Second Automobile Works.

Even on November 11, I read the news that Leader Wang replaced Leader Yang as the director of the high-level office, and there was an article in Shanghai's "Wenhui Po" criticizing an expert on Ming history.

I am now closely associated with the working class, who dares to say that I am a bell running in the opposite direction?

However, Gu Weijun still secretly found Principal Jiang Nanxiang, and the two secretly chatted for a long time.

After that, Principal Jiang waved his hand, and every Sunday, the teachers took the students to the production line to support the construction of Shougang and Beijing Second Automobile Group!

The time soon came to January 66, 1, the 20th day of the Lunar New Year. Gu Weijun listened to the sporadic sound of firecrackers outside, looked at the relatives and friends gathered around for dinner, and raised his glasses enthusiastically.

This is the last New Year’s Eve in a few years!

(End of this chapter)