Anchor with goods, the price of F2 is very reasonable, right?

Chapter 115 Wang Yang’s live broadcast room is great value for money, making a lot of money this time!

Qingcheng branch of Jiuzhou High-end Machine Tool Research Institute.

In the office, Zhou Ran, who had white hair, wore black-framed thin-rimmed glasses, and showed waves of majesty in his eyebrows, raised his fingers and tapped the table very rhythmically.

At the same time, he raised his head from time to time and looked out the window to see if there was any car driving into the compound.

But every time, there was a little disappointment in his eyes.

"I said I was going back in an hour, why haven't I come back yet? Logically speaking, I should be back in about half an hour at most." Zhou Ran stood up and walked back and forth in the office with a very expression on his face. anxious.

When He Wei told him that two ultra-high-precision machine tools were obtained from somewhere, which may be the latest high-end machine tools produced by Yamazaki Mazak Company, he rushed over from the capital non-stop, with the purpose of being able to Get an early look at these two ultra-high-precision machine tools.

Recently, Kyushu's high-end machine tool industry has been blocked by Yamazaki Mazak's technology. As a result, several major manufacturers in the industry have lost all foreign orders, leaving few domestic orders, and may even face the risk of bankruptcy.

Under this situation, as a researcher dedicated to studying high-end machine tools in Kyushu, he was heartbroken and even fell into deep self-blame for a time.

After all, if he could have developed Kyushu's high-end machine tools earlier and conquered the corresponding technologies earlier, he would not be facing the current situation.

But no matter how much he blamed himself, it was useless. He was now more eager to see those two ultra-high-precision machine tools, and he also wanted to see whether they were really ultra-high-precision machine tools.

Just when he was extremely anxious and even felt that his days were like years.

Rumble.

He heard the sound of a car driving into the compound outside the window. He immediately walked to the window, and then saw two military off-road vehicles in the compound, carrying two giant transport vehicles transporting huge goods. Driving into the compound.

coming! It must be the arrival of ultra-high-precision machine tools!

Zhou Ran immediately turned around and ran outside, but as soon as he opened the door of the office, he saw the research staff of the institute raising their hands. Before he could knock on the wooden door: "What's wrong?"

"No, it's nothing. Professor Zhou, I just want to tell you that Mr. He is back with something..."

"I see."

Zhou Ran directly missed the scientific researchers and ran outside.

finally come! Ultra-high-precision machine tools are finally here!

……

Inside the institute compound.

Two giant trucks were parked steadily in the compound. As the sound died down, many scientific researchers also walked out of the R&D center and came here, staring at the two giant trucks.

Then, they saw several soldiers getting out of the car. Li Wenshan and He Wei got out of the car together.

Some of the scientific researchers present recognized Li Wenshan, but not He Weilai.

After all, Li Wenshan is the chief commander of the Qingcheng Garrison District, and He Wei is the chief minister of the Economic Reform Department of the capital. They may know Li Wenshan, but they may not know He Wei.

At the same time, they also became interested in the things loaded on those two giant trucks.

No one knows what is inside, but if it was delivered here, it must be something related to machine tools.

Moreover, some of them knew that Professor Zhou Ranzhou from Beijing, a veteran who had worked in the machine tool industry for many years, came to Qingcheng today, which meant that something must have happened.

"Is it possible that this is an ultra-high-precision machine tool that our country has just developed? Chief Li was actually escorted. This level is not low."

"How is it possible? Even if it is researched, how can it be sent to us? Qingcheng does not have such a large high-end machine tool manufacturer."

"That's right. No matter how you think, this must be supplied to big manufacturers first, you can't come to us to study it, right? Stop talking nonsense."

"Yes, the equipment here is not good enough. It is far from the capital. No matter how you think about it, you can't come here to do research."

"What could it be? It can't be something that has nothing to do with machine tools."

There was endless discussion, but everyone tried to control their voices as much as possible.

And while everyone was discussing.

Tapping.

The sound of hurried footsteps came from the direction of the R&D center, and everyone looked at the sound. Then they saw Zhou Ran and Professor Zhou with anxious faces, hurriedly walked out of the R&D center and trotted towards Li Wenshan.

"Sure enough, it has something to do with Mr. Zhou!"

"Does that mean that this might really be a high-end machine tool?"

"Judging from Mr. Zhou's appearance, these may also be parts of some high-end machine tools."

"It's possible..."

Amid the discussion, Zhou Ran slowed down when he was about to run in front of Li Wenshan.

"Chief Li, thank you for your hard work. Director He, thank you for your hard work." Zhou Ran raised his hand in salute, his face full of expectation.

The two of them saluted in response and looked at Zhou Ran solemnly.

"That's right, Mr. Zhou."

"Mr. Zhou, we have brought you the things. How about we unload them first?" He Wei suggested.

Zhou Ran hurriedly waved his hand: "No, no, just open it. I can just look at it here. It won't be in the way."

He couldn't wait to disassemble the ultra-high-precision machine tool now, he wanted to see it now.

"Ah, okay, bring a ladder over here." Li Wenshan called to the soldiers beside him.

After moving the ladder, Zhou Ran watched the rear doors on both sides of the giant truck being opened at the same time. Inside, there was a new ultra-high-precision machine tool with the same appearance as the one recently developed by Yamazaki Mazak Company. The whole person became excited, and his hands were trembling slightly.

Although he still doesn’t know whether this ultra-high-precision machine tool is real, he is already very excited to see an ultra-high-precision machine tool that looks so similar and exactly the same.

"Hurry up and support Mr. Zhou. Don't let Mr. Zhou fall." He Wei greeted.

Several people stretched out their hands to guard on both sides of the ladder, and Zhou Ran climbed up in two steps like Spider-Man, very fast, and he didn't look like an old man at all.

Arriving at the cabin, Zhou Ran slowly leaned towards the ultra-high-precision machine tool. He raised his trembling hands and gently stroked the ultra-high-precision machine tool in front of him.

Like, it's so similar, it can even be said to be exactly the same.

The ultra-high-precision machine tool in front of him was exactly the same as the one produced by Yamazaki Mazak Company, and it was exactly the same as the prototype machine he saw at a previous exhibition.

To be honest, if He Wei hadn't told him in advance, this might be a fake. Just by looking at it, he was almost sure that this was a real ultra-high-precision machine tool.

After all, it's so realistic.

After walking around to the front of the ultra-high-precision machine tool, Zhou Ran noticed the precision CNC display on the surface, which was the screen.

He raised his hand and touched the screen. There was a plastic film on the outside.

The tactile feel is that of a CNC screen, not the astringent feeling brought by an ordinary display screen at all.

"It's not a black film stuck on, this is a real precision CNC display." Zhou Ran murmured to himself, concentrating on looking at this ultra-high-precision machine tool.

His pupils trembled slightly, and the remaining stubble at the corners of his mouth trembled as the corners of his mouth rose, with an excited smile on his face.

But he was not happy too early. He quickly calmed down his inner emotions and continued to observe the next piece of equipment.

The length of an ultra-high-precision machine tool is nearly ten meters. Zhou Ran looked at the entire ultra-high-precision machine tool step by step.

To be honest, just from the appearance, this ultra-high-precision machine tool is very realistic, exactly like the real thing.

Moreover, he paid special attention to the back of this ultra-high-precision machine tool and found that there was a piece of transparent tempered glass, which allowed him to clearly see the distribution of internal components.

This design is the same as the design of Yamazaki Mazak Company. The purpose is to ensure that the internal situation can be seen at all times and to avoid accidents.

At that time, he had carefully observed it, and this time, when he observed this ultra-high-precision machine tool, he was surprised to find that it was exactly the same as the ultra-high-precision machine tool he had observed at the exhibition before.

Whether it's the distribution of parts or the internal mechanical conditions.

If this is a fake ultra-high-precision machine tool, then Zhou Ran can be sure that it is an extremely high-precision machine tool.

Perhaps except for the lack of accuracy, the appearance alone is completely comparable to a real ultra-high-precision machine tool.

After going around in a circle, he nodded with satisfaction. It had to be said that through external observation, there was no problem with this ultra-high-precision machine tool. He just didn't know the specific accuracy problem and how it was used.

Of course, it is impossible to test the machine without powering on the power now.

However, Zhou Ran also had a way to confirm whether this ultra-high-precision machine tool was a prototype or a real ultra-high-precision machine tool.

At this time, everyone in the audience looked at Professor Zhou with doubts. They watched Professor Zhou walking back and forth, looking at this ultra-high-precision machine tool and saying something from time to time. Their curiosity was completely aroused.

"No, what is Professor Zhou talking about? Can anyone see it?"

"Good guy, who can see it from so far away, but judging from Professor Zhou's appearance, is it possible that this is a real ultra-high-precision machine tool?"

"No way. Where did you get this ultra-high-precision machine tool?"

"Wait a minute, couldn't this be bought from Wang Yang's live broadcast room? I remember when I was watching the live broadcast last night, the military bought two units. Good guy, it couldn't be these two units, right?"

"It seems...it's really possible."

"That's not right. What Wang Yang sells in his live broadcast room are not models? If they are models, Mr. Zhou will definitely be able to tell at a glance given his qualifications."

"Hey, is it possible that this is really an ultra-high-precision machine tool? It's impossible."

As the crowd's discussion grew louder, Zhou Ran also stood in front of the ultra-high-precision machine tool. He has not yet found the control console of this ultra-high-precision machine tool, where the main engine is located.

Each ultra-high-precision machine tool needs to be controlled through the host computer, that is, the main control platform, to adjust the angle, adjust the arc, and adjust the speed and accuracy of the tool entry, because only in this way can it ensure that it meets the requirements. Can also cut perfect angles.

But he did not see a main control platform on this ultra-high-precision machine tool.

Obviously, when we saw Yamazaki Mazak's genuine high-end machine tools at the exhibition, the main control platform was placed outside the equipment.

Is it possible that this is really a model that is just an imitation of its appearance but of no use at all?

While thinking, his eyes noticed that there was an area with nothing on the surface of the ultra-high-precision machine tool, and there seemed to be a linkage device installed on the surface.

Zhou Ran was stunned and hurriedly stepped forward to open the linkage device, but failed.

While he was thinking about it, he saw a page of paper from the corner of his eye, which was caught between the gaps in the shell structure.

He pulled out the paper out of curiosity, and when he saw the words "Instruction Manual for this Ultra-High Precision Machine Tool" written on the top of the paper, his expression suddenly became startled.

user's Guide?

Does this thing have an instruction manual?

It's so considerate.

Zhou Ran carefully read the entire instruction manual in detail.

Then, he raised his head, looked at the linkage device in front of him, and tentatively entered a password on the nine-square digital keys next to the precision CNC display.

Click.

Then, as the sound sounded, the linkage device was opened, revealing a screen inside and a simple control platform.

Zhou Ran looked around and his pupils shrank suddenly.

That's right, this is the main control platform of the ultra-high-precision machine tool he saw at the exhibition before. It's exactly the same!

"Is this really a real ultra-high-precision machine tool? This, this is really unbelievable. No, this can only prove that this ultra-high-precision machine tool is indeed copied from the original. It looks like a one-to-one replica, but before it is started and tried, it cannot be proved that it is real.”

Zhou Ran murmured to himself, the excitement on his face could no longer be suppressed, and his heart was beating wildly, as if it was about to beat out of his chest.

Now it can be basically confirmed that buying this ultra-high-precision machine tool is very meaningful. Even if it costs 100 million, it is still worth it. Just disassemble this ultra-high-precision machine tool and follow the layout and corresponding technical points. Distribution, etc., can be applied to domestic high-end machine tools.

Thinking like this, he walked quickly in the direction of Li Wenshan and others.

"Mr. Zhou, how is the situation? Do you think this is true or false?" He Wei lowered his voice and asked.

Li Wenshan was equally curious.

Although he knew that Wang Yang might not lie to him and that this might be a real ultra-high-precision machine tool, Yamazaki Mazak even denied it. Can Wang Yang still get a real ultra-high-precision machine tool?

Not really.

However, Wang Yang had obtained a real F22 fighter jet before.

And this ultra-high-precision machine tool doesn’t seem to be a very important thing...

At this time, Zhou Ran said solemnly: "It's not certain yet. Quick, put this ultra-high-precision machine tool in the workshop. I want to test it."

Upon hearing this, He Wei and Li Wenshan reacted at the same time, and were shocked.

Since Mr. Zhou has said this, it means that Mr. Zhou has basically determined that this is a real ultra-high-precision machine tool just by looking at the appearance, the distribution, etc.

However, even Mr. Zhou cannot determine whether this is true before starting or testing it with the naked eye, so it is necessary to put the ultra-high-precision machine tool in the workshop.

"What are you doing standing still? Move quickly!" Zhou Ran shouted.

Li Wenshan nodded hurriedly: "Hey, I'll arrange for people to move right away. Mr. Zhou, you go and prepare first."

"Okay, as soon as possible, but be careful not to damage it!"

"Don't worry, Mr. Zhou."

……

R&D center, in the machining experimental workshop.

In front of the huge ultra-high-precision machine tool, Li Wenshan, Zhou Ran, and He Wei stood here. They all put on work clothes and masks.

After all, in this workshop, the temperature and humidity are constant, just to test the extreme accuracy that high-end machine tools can achieve under such stable temperature and humidity.

Zhou Ran, holding a piece of raw material in his hand, stepped forward with some anxiety.

To be honest, although he was fully looking forward to starting this ultra-high-precision machine tool, when it came to this step, he couldn't help but feel a little nervous.

You know, he has now basically determined that this ultra-high-precision machine tool is very likely to be a real one.

But if he discovers when he starts it later that this is a fake ultra-high-precision machine tool, he will be extremely disappointed.

Jiuzhou's high-end machine tool industry really needs an ultra-high-precision machine tool, but because of this, Zhou Ran had to start it.

"The power is on, Mr. Zhou, it's time to start." He Wei reminded from the side.

Hear the words.

Zhou Ran took a deep breath, and then pressed the start button on the CNC display.

drop--

The moment he pressed it, the ultra-high-precision machine tool made a crisp beep, the precision CNC display illuminated, and a logo appeared on it, which was a complete imitation of the Yamazaki Mazak logo.

Click.

The linkage device was also opened, and the main control platform was slowly pushed out and presented in front of Zhou Ran.

It can be started... Not only can it be started, but the main control platform and the precision CNC display are absolutely easy to use. He even saw the status of some parts inside the ultra-high-precision machine tool while it was running.

It's true, it seems true!

This ultra-high-precision machine tool not only looks good on the outside, but it can also be started. It seems that there will be no problems even in operation.

This is enough to prove that this may be true, the latest ultra-high-precision machine tool produced by Yamazaki Mazak Company!

"Mr. Zhou, this, this is really..." He Wei opened his mouth wide, the pupils in his eyes trembling, the expression on his face was full of shock, but also filled with excitement and excitement.

The moment he saw this ultra-high-precision machine tool start up, he thought that this might be a real ultra-high-precision machine tool. After all, if it couldn't start, it must be a fake.

And if this is really the most advanced and top-notch ultra-high-precision machine tool in the world, it will be an extremely important thing for Kyushu.

Li Wenshan narrowed his eyes: "Mr. He, it looks like this is a real ultra-high-precision machine tool!"

He is now 90% sure that this is the latest ultra-high-precision machine tool produced by Yamazaki Mazak Company that Wang Yang obtained through his channel.

Just as he had guessed, Wang Yang, who could get a real F22 fighter jet, didn't seem to have a hard time getting this ultra-high-precision machine tool.

Zhou Ran turned around: "You are right, this should be a real ultra-high-precision machine tool, but I still need to test the specific accuracy."

Li Wenshan and He Wei were shocked at the same time.

They all heard the solemnity in Mr. Zhou's tone, as well as the extremely suppressed excitement and excitement. They could also see that Mr. Zhou was also trying his best to restrain himself from being too excited.

To avoid misjudgment and other situations.

But the current situation is that we only need to use a piece of raw material to test the best accuracy that this ultra-high-precision machine tool can achieve.

Success or failure depends on this!

Thinking of this, Zhou Ran no longer hesitated, picked up the raw materials in his hands, put them into the discharge port of the ultra-high-precision machine tool, and began to operate the main control platform and precision CNC display in front of him.

At this time, Li Wenshan and He Wei were also staring intently at everything Zhou Ran was doing.

……

After half an hour.

Wearing thick dust-proof gloves, Zhou Ran carefully took out the raw materials cut by the machine tool from the discharge port and placed them on a professional measuring level accuracy meter.

A scientific researcher immediately calculated its current accuracy.

Suddenly, the expressions of the other three people were full of anticipation, and they all looked at the level accuracy meter attentively.

"Professor Zhou, the current size of this piece of raw material is 56.789 microns, and the size set by the machine tool is 56.788 microns. The error of this ultra-high-precision machine tool is 0.001 microns, reaching the highest accuracy value announced by Yamazaki Mazak Company! "The tone of the scientific researchers was trembling, and they looked at Zhou Ran at a loss.

Zhou Ran was stunned for two seconds, swallowed his saliva, and murmured to himself: "Really... this is really an ultra-high-precision machine tool! It's really an ultra-high-precision machine tool produced by Yamazaki Mazak Company." ! It’s true, it’s certain, it’s true!”

Zhou Ran laughed heartily, and all the excitement and excitement that he had suppressed before were released at this moment, making him feel unprecedentedly happy.

"Really? Mr. Zhou, are you really sure it's true, right? Are you sure? Hahaha, Chief Li, this is real, it's real!" He Wei exclaimed after a brief moment of astonishment, The whole person fell into some kind of crazy state.

As long as we can be sure that the ultra-high-precision machine tool in front of us is real, that is the happiest thing at the moment.

After all, what Kyushu needs most now is ultra-high-precision machine tools.

Moreover, what excites He Wei the most is that when he originally purchased these two ultra-high-precision machine tools in Wang Yang's live broadcast room, it was purely for a gamble and to see if they were real.

What he didn't expect was that this was indeed true, and not only was it true, this was an ultra-high-precision machine tool with the highest precision in the world!

This transaction was a huge profit!

(End of this chapter)