Anchor with goods, the price of F2 is very reasonable, right?

Chapter 93: With the power of the whole country, please ask Wang Yang to take action?
Qingcheng.

Inside Wang Yang’s rental house.

As he typed the last character, Wang Yang finished writing the entire restoration process, which was tens of thousands of words long.

Looking at the document in front of him, Wang Yang breathed a long sigh of relief and sat slumped on the computer chair.

After a week, he finally completed the repair process.

And he doesn't plan to rest next time.

After a brief rest, he stood up, got dressed, and prepared to go to the warehouse.

The sooner those six ultra-high-precision machine tools are repaired, the sooner they can make money.

Although it is very likely that Yamazaki Mazak will block the core technology of machine tools, and may even not sell the latest ultra-high-precision machine tools to Kyushu, in short, it is a piece of news.

During this week, Wang Yang thought about it and felt that the six ultra-high-precision machine tools should be repaired earlier, in case Yamazaki Mazak Company was a cover-up and paved the way for subsequent price increases.

Then when the top machine tool factories in Kyushu all compromised and decided to buy Yamazaki Mazak's ultra-high-precision machine tools at high prices, then who would he sell these six ultra-high-precision machine tools to?
After all, by then, it is estimated that everything that should be available will be available, and those that are not available will be those machine tool factories that cannot afford it or have limited competitiveness.

It's better to fix it as soon as possible now.

With this in mind, he quickly packed it up, went downstairs and drove to the warehouse.

……

It didn't take long for Wang Yang to arrive at the warehouse. He saw the six battle-damaged ultra-high-precision machine tools and imagined how they would look after repair, with a smile on his face.

Putting down the computer and opening the document, Wang Yang did not repair it immediately. Instead, he took out a small testing equipment and tested the six ultra-high-precision machine tools one by one.

As the system said, these six ultra-high-precision machine tools seem to have been extremely seriously damaged in battle, but they are not like the F22 fighter jets that need to be completely repaired.

As long as you use this small testing equipment to test it once, you can get the results of where repairs are needed and where repairs are not needed. Then, as long as you carry out fixed-point repairs based on this result, the repair will be done with twice the result with half the effort, and it can be repaired in the shortest time. Make repairs.

Drip!

Wang Yang held a small testing device in his hand and placed it in front of an ultra-high-precision machine tool, accompanied by a burst of noise.

In front of him, a transparent interface that only he could see appeared out of thin air, and the interface contained the results of the test.

[After testing, the missing parts of this ultra-high-precision machine tool are: ultra-high-precision measuring device, machine tool machining center detection device, machine tool machining center control system template, machine tool machining center operating console...]

[After evaluation, the repair parts required for this ultra-high-precision machine tool are: ultra-high-precision measuring device...]

Wang Yang's eyes lit up as he looked at the transparent interface that appeared in front of him.

I have to say that the products produced by the system are really easy to use. With such an easy inspection, you can find out the missing parts, device parts that need to be repaired, etc.

In this way, it will completely save a lot of trouble.

Moreover, in this way, Wang Yang can produce parts in the same batch, producing multiple parts at one time, so as to achieve the purpose of joint repair of six ultra-high-precision machine tools, thereby reducing repair time.

Then, Wang Yang followed suit and tested the remaining five ultra-high-precision machine tools one by one, and the results obtained were naturally what he wanted to see most.

First of all, most of what is missing from these six ultra-high-precision machine tools is the core technology, that is, the main components that allow this machine tool to achieve an accuracy of 0.01-0.001μm.

Secondly, some small, less important parts are also missing, but fortunately the losses are not very large. There are several such small parts in ultra-high-precision machine tools that can still be used.

Therefore, his next main purpose is to specialize in those main and core technical components.

Wang Yang put away the small testing equipment, turned to the computer, and looked at the overall repair process he had written. Just as he was about to take out all the repair materials and instruments he had bought from the system mall.

Jingle Bell.

The phone rang suddenly.

He took out his cell phone and looked at the caller number. It was Liang Yuzhu.

"Hey, Mr. Liang, what's going on?" Wang Yang asked in confusion.

Because he had told Liang Yuzhu before not to disturb him during this period. He had to concentrate on repairing ultra-high-precision machine tools and had no free time to do other things.

At this time, Liang Yuzhu's call was probably true and important.

During the phone call, Liang Yuzhu's tone was a little urgent: "Wang Yang, that, that Yamazaki, Mazak Company, yes, that's the company. This company joined other, the world's top machine tool manufacturers, to issue a statement. "

"The statement mentioned that these companies will no longer sell the latest ultra-high-precision machine tools to machine tool factories in Kyushu!"

"Huh?" Wang Yang was stunned: "Is this true?"

"Really, this matter is currently a hot topic on the Internet and has become a hot search topic!" Liang Yuzhu said.

"I'll go take a look." Wang Yang hung up the phone and immediately opened Weibo.

Clicking on the hot search list, sure enough, the first hot search item was [Jiuzhou Machine Tool Industry Crisis].

Clicking on this hot search, Wang Yang saw the detailed content.

The general idea is that Yamazaki Mazak, together with other top machine tool manufacturers in the world, has completely blocked the sale of the latest ultra-high-precision machine tools to Kyushu. This operation is likely to cause the short-term decline of Kyushu's machine tool industry.

Under this hot search, countless netizens also started to comment.

【Are you crazy?If they don't sell to Kyushu directly, do they think they can't live without Kyushu? 】

[You really shouldn’t argue about this. This is the fact. At present, the machine tool industry in Kyushu seems to be developing very well, and you are fully able to produce and sell it yourself. But that is only the low-end market, but the high-end market is really It depends on the machine tools of these machine tool manufacturers to produce it. 】

[Yes, to put it simply, if they leave the Kyushu market, they may make much less money, but if the Kyushu machine tool industry leaves their high-end machine tools, the losses will be extremely huge and impossible. Estimated. 】

[Damn, this feeling of being controlled by others is so uncomfortable. These idiots from Shenzhao Kingdom are so disgusting! 】

[Alas, I can only say that some people don’t want Kyushu to develop too fast, otherwise it will affect their status. Haha, I used such despicable methods before, but I didn’t expect that even now, I would still use such despicable methods. , it is simply disgusting and could not be more disgusting. 】

[But there is nothing we can do about it. Who let the Jiuzhou machine tool industry have a shortcoming? If the Jiuzhou machine tool industry can achieve technological breakthroughs, then there is no need to be so passive. 】

[Good guy, do you think technological breakthroughs are so simple?To put it bluntly, the high-end machine tools of Kyushu machine tool manufacturers are now operated by foreigners. We Kyushu people can't even touch a piece of equipment, just to prevent technology leakage. 】

【Damn it. 】

Wang Yang frowned as he looked at the comments below.

To be honest, after hearing the news about Ichiro Kawamoto, he had thought that this day would come. But what he didn't expect was, did this day come too soon?

Just one week later, the world has changed?
Moreover, he felt more and more that the Yamazaki Mazak Company was definitely not holding anything back.At this time, we choose to block high-end machine tools and not sell high-end machine tools to Kyushu. Isn't this just to suppress the machine tool industry in Kyushu? By the way, it may also have a certain impact on the development of other industries in Kyushu.

After all, the Jiuzhou machine tool industry can be said to be the foundation of some parts manufacturing, as well as auto parts, aviation and other industries. If there is a problem with the foundation, the upper-level industries will definitely be affected. Even an ordinary person who does not understand economics will not be able to do this kind of thing. Know.

Do these companies want to increase prices?

Wang Yang immediately thought of this possibility.

Businessmen have a very disgusting practice, which is to engage in hunger marketing.

First create the illusion that supply exceeds demand, and then sell the goods at a price higher than the market price to earn high profits.

But this approach is still reasonable and is nothing more than a marketing strategy.

But what Yamazaki Mazak Company did this time was to prepare to rob it openly.

Of course, it is also possible that they are not planning to increase prices, but simply want to block the technology.

In any case, after this statement is released, the Jiuzhou machine tool industry will not be easy to do in the next period of time.

We can only wait for the repairs of our six ultra-high-precision machine tools to be completed before the Kyushu machine tool industry can recover.

Thinking of this, Wang Yang was stunned and trembled.

He turned his head and looked at the six ultra-high-precision machine tools placed in the warehouse.

Co-author, the six ultra-high-precision machine tools that he now owns with extremely serious war damage have become the last hope of the Kyushu machine tool industry?

Thinking of this, he didn't know whether to be happy or ridiculous for a moment.

Invisibly, Yamazaki Mazak Company gave him a wave of assists, very powerful assists!
After briefly browsing the comment area again, Wang Yang exited this hot search.

Just when he was about to put the phone in his pocket and concentrate on repairing it.

Ding dong.

The phone beeps.

The screen of the mobile phone showed that many people in his Weibo chat were Aite himself.

Out of curiosity, Wang Yang clicked on his own super chat, and immediately, countless comments from Aite appeared like airdrops.

[@王阳阳哥, are you interested in high-end machine tools?Now that Teruko Kogami no longer sells high-end machine tools to us in Kyushu, we have to lower the price quickly! 】

[@王阳王阳, aren’t you awesome?If you are really awesome, you can lower the price of ultra-high-precision machine tools!Even if you don't set the price, you can buy it back, and I respect you as a man. 】

[@王阳阳哥, don’t listen to these anti-fans. These people are just a bunch of idiots. Damn it, they just stopped selling it. You still want to ask Brother Yang to lower the price?What are you thinking? Are you crazy? 】

[@王阳Don’t pretend to be dead, didn’t you say that as long as fans want it, you have the ability to lower the price?This time I don’t need you to set the price, as long as you can buy the things back. 】

[@王阳阳哥, you went to Shenzhao Kingdom some time ago. You wouldn’t have known that this day would come and bought the high-end machine tools in advance, right? 】

[@王阳阳哥, I bet the thing you bought when you went to Shenzhao Kingdom was an ultra-high-precision machine tool, the latest model from Yamazaki Mazak! 】

Looking at these comments, Wang Yang didn't know whether to laugh or admire the netizens' imagination.

This year's netizens' association skills were so strong that they could even relate to it. This was something he didn't expect.

But it also proves how angry netizens are about this matter.

In fact, anyone with a discerning eye can see the significance of this statement. Everyone also knows that after this statement, Kyushu will likely face problems.

Therefore, whether it is passers-by who are making fun of him, those who are anti-fans, or his true fans, they all came to his chat and asked him to price the ultra-high-precision machine tools.

Ding dong.

At this time, the message tone sounded again.

Wang Yang looked at the pop-up window, which was an invitation to answer prompts sent by Bihu.

I clicked on this notification.

Wang Yang saw that problem.

[Regarding the blocking of high-end machine tool technology, how should we in Kyushu respond? 】

Just below this question, some respondents answered the question seriously and proposed various solutions.

However, these plans are too false and far-fetched, tending toward fantasy, and are simply impossible to realize.

The remaining respondents have a potential of 50 yuan, and their answers are all based on inciting emotions and kneeling down to win over the world's top high-end machine tool manufacturers.

The last part of the respondents are the people who invited Wang Yang to answer this question.

Their answers were basically the same.

[I know this question. I’ll call Brother Yang over now. 】

[Brother Yang once said that as long as fans want it, Brother Yang can lower the price! 】

[Brother Yang, it’s up to you! 】

[That's right, after all, I, Brother Yang, am the man who can bring down the price of the F22 fighter jet. Isn't this small high-end machine tool just a handful?Treat me@我阳哥, all problems are no longer problems.Funny, funny. 】

[What are those machine tool factories waiting for? Why don’t they quickly go find the great god Wang Yang?If Wang Yang takes action, he will definitely be able to buy back the high-end machine tools! 】

[Wait a minute, aren’t Wang Yang’s two F22 fighter jets models he built himself?Is that a real F22 fighter jet? 】

[Good guy, some people actually believe that Wang Yang can buy high-end machine tools. Those two F22 fighter jets are models he built himself. He has admitted this himself. You guys, you have to be moderate in your jokes. . 】

[Good guys, you guys have had enough. There must be a limit to the yin and yang's evil spirit. What if Wang Yang is really called over? Do you just want to see Wang Yang embarrassed?Funny, funny. 】

Wang Yang looked at these respondents, the corner of his mouth twitched, and the expression on his face became complicated. He then sighed silently and shook his head helplessly.

Yes, these netizens are indeed capable of making jokes. Remember to come to him for such things.

It seemed that he could no longer remain invisible.

Wang Yang thought for a while, picked up his phone and started editing.

(End of this chapter)