Incredible understanding, starting with the creation of Iron Man armor

Chapter 43: Factory upgrade, mecha production completed

As Lin Shen spoke, he took the phone away and pretended to be silent and ready to hang up.

Sure enough, Xie Huaan's voice immediately became anxious.

"Wait a minute, what did you just say?"

"If you want to research any new projects, just wait for me. I will move the laboratory to you today."

"Send me the address later."

As soon as he finished speaking, there was a beeping sound coming from the other end of the phone.

When Lin Shen heard this, the corners of his mouth couldn't help but raise.

Sure enough, he knew that Xie Huaan was definitely serious about research.

He really didn't miss any opportunity to study with Lin Shen.

Next, let’s set it up ourselves.

Lin Shen took a look at the floor plan of the factory and went directly to the 3D printing factory area.

Then I started studying the drawings.

The drawings of large-scale mechas are more than a little more complicated than those of Iron Man's armor.

It took Lin Shen just two hours to complete the drawings of the four branches.

And every component is extremely huge. If it is really assembled, the height of this mecha will be seven to eight meters.

You must know that one floor is only three to four meters high, but this is as high as two floors.

Mechas are real men's toys, Lin Shen got excited just thinking about it.

After the drawings of the limbs were set, Lin Shen started printing them with a 3D printer.

I have to say that it is very convenient to have special machinery to make it.

In addition to completing the drawings, he didn't even need to assemble it at all.

In fact, it is not the tools for production and assembly that are inferior to technology in this era.

The only difference is the ideas and some rare materials.

But these were nothing to Lin Shen, who fully understood the drawings and structures.

For a whole afternoon, Lin Shen was basically busy with drawings.

The lights throughout the factory were always shining.

It wasn't until it got dark outside that Lin Shen stood up and stretched.

He finally finished all the drawings.

"It's just a pity that the production speed is a bit slow. I'm afraid it will take about a month to complete the production of the entire mecha."

Lin Shen glanced at the 3D printer that was still running and nodded with satisfaction.

Then I was ready to go home and rest.

In the afternoon, Xie Huaan called and said that the relocation of the laboratory might be delayed for a while.

Because the original Iron Man suit was slightly adjusted due to energy issues.

Now that the energy core has been solved, the original version of the Iron Man suit that has been adjusted can be used.

So I still need to make a new set, which is still waiting to be tested.

Originally, Xie Huaan was even planning to let Lin Shen come back in person. After all, with his leadership, the speed of remaking an Iron Man suit would be much faster.

However, Lin Shen was still busy here, so he naturally refused.

These matters can only be left to Xie Huaan and the others.

Anyway, I’ve made it once, so practice makes perfect the second time.

In the following days, Lin Shen came to the factory every morning. While observing 3D printing, he was also studying other technologies.

He even spent some time to modify the equipment in the factory.

Especially the photolithography machines. Just relying on the photolithography machines in the factory, they have long been eliminated by the times. It can be used to make some ordinary technological products, but it is naturally not enough to make mechas.

Let alone mechas, even if they are used to make Iron Man armors, the products produced may have flaws.

Lin Shen didn't even want to take a look at the 90-nanometer lithography machine.

So he spent some time and directly developed a 5-nanometer photolithography machine.

It took him a full week to complete the production of this photolithography machine.

Just this week, the mecha shell that does not require photolithography printing has been completed.

Next comes the finer things, such as built-in parts and so on.

For the next half month, Lin Shen supervised the production of mechas while upgrading various machines.

A month passed quietly.

All the machinery available in the entire factory has even been refurbished.

Lin Shen was very busy by himself.

The production of the armor has also come to an end.

Wiping the sweat from his head, Lin Shen looked at the moving robotic arms in the assembly cabin with a hint of expectation in his eyes.

The height of this factory building was originally considered relatively high, about ten meters.

But this is not enough. If it is just the height of the mecha, it must be enough. But how should the skills be separated?
  And there will definitely be something even bigger in the future, so in order to consider these two points.

Lin Shen simply asked someone to come over and remove the roof of the factory building.

Even the original robotic arm has been lengthened more than a little.

Finally, after the last part was assembled, Lin Shen could no longer control the smile on his lips.

This is a whole month of his hard work!

Finally finished it today.

Although he is alone, Postal has the help of his own upgraded and modified machinery.

It is not a problem to complete the production of an entire armor alone.

"Xiao Lin, I'm done here. You can get ready later this afternoon, and we'll come right over."

Lin Shen's phone rang. After picking up the phone, the voice that came over was Xie Huaan's.

In one month, Lin Shen's mecha has been completed, and their Iron Man suit has also been completed.

The second production time was twice as fast as the first time.

Lin Shen glanced at the assembled mecha, and a smile appeared on his lips.

He didn't know what his expression would be like when Xie Huaan and the others arrived and saw such a mecha.

However, Lin Shen still has some headaches when it comes to energy.

He even went to Old Man Zuo himself for the energy of the mecha.

We just got a controllable nuclear fusion source equipped with an energy core.

Otherwise, such a big guy might not be able to support it at all just by using ordinary energy.

Next, Lin Shen found a huge black cloth and covered the entire mecha inside.

Just quietly waiting for the arrival of Xie Huaan and the others.

But this time, it was not just Xie Huaan and the others who came, but Old Man Zuo and Professor Wang also came.

The three of them got together and got out of the car while bickering.

It was obvious that Professor Wang and Old Man Zuo knew each other.

"This factory is huge enough. Look at it like this, you have big plans."

As soon as they got off the bus, Xie Huaan and the others were amazed when they looked at the endless factory area.

(End of this chapter)