Don’t panic if you get scammed, give him a Desert Eagle instead.

Chapter 127 Xuanlong No. Fighter
He knew that the current situation was indeed not optimistic. However, he knew better that as the person in charge, he could not retreat or give up.

"Wang Mingyuan, I know the situation is very bad now, but we can't give up just yet."

Jiang Chuan's voice was firm and powerful, "We must have full confidence in the Xuanlong 1 fighter jet and believe that we will be able to overcome these difficulties."

Guo Dastanson, the young engineer, had a gleam in his eyes: "Mr. Jiang, I believe we will succeed. We have the best technical team. As long as we work together, we will be able to overcome the difficulties."

Jiang Chuan nodded, his eyes scanning the faces of every engineer, as if looking for confidence and courage.

He knew that at this time, what he needed to do was not only give instructions, but also inspire the team's fighting spirit and confidence.

"Okay, then let's work together to overcome these technical problems." Jiang Chuan's voice was sonorous and powerful.

"Starting today, we will work overtime and go all out to advance the project progress. I believe that as long as we work together, the Xuanlong 1 fighter jet will be delivered on time."

Jiang Chuan stood in the conference room of the Oceania Arms Factory, his eyes burning as he examined the Xuanlong 1 fighter design plan on the projection screen. His brows were furrowed, as if he was looking for flaws in the design.

"Everyone, we must conduct an in-depth analysis of this design plan." Jiang Chuan's voice was low and firm. He turned to look at the team members behind him, his eyes revealing unquestionable determination.

In this process, Jiangchuan's leadership and team management abilities were fully demonstrated.

As Jiang Chuan explained, the team members nodded one after another, with expressions of sudden realization on their faces.

Guo Dastanson looked excited. He is young and promising and eager to show off his talents in this project.

In the days that followed, Jiang Chuan led his team members to continue to conduct in-depth research on the design of the Xuanlong 1 fighter jet and continuously optimize and improve it.

They began to discuss these issues and put forward their own insights and suggestions.

They modified the wing design, optimized the position of the engine air inlet, expanded the bomb bay capacity, and every problem was properly solved.

After a period of in-depth discussion and sorting out, the team members finally formulated the corresponding solution.

As an old expert in the team, Wang Mingyuan raised his eyebrows when he heard this. He was well aware of Jiang Chuan's rigor and criticality, but he also believed in his vision.

Jiang Chuan listened to their discussion and nodded in agreement from time to time. He knew that this was a cohesive and creative team that had the ability to solve these problems.

"Yes, we can also consider optimizing the position of the engine air inlet to ensure smooth air intake." Guo Dastanson added.

He nodded slightly and agreed: "Mr. Jiang, we really need to sort out these issues carefully to ensure the perfection of the design plan."

Not only is he able to pinpoint the problem, he is also able to guide team members to find the best solution to the problem.

As the Xuanlong 1 fighter research and development project gradually deepened, Jiangchuan discovered that there were bottlenecks in the supply of certain key materials.

Jiangchuan smiled slightly. He admired Guo Dastanson's confidence and enthusiasm. He walked to the whiteboard, picked up a pen and started pointing out the problems in the design one by one.

"First of all, the wing design here is too conservative, which is not conducive to high-speed maneuvering. Secondly, the position of the engine air inlet is unreasonable, which may lead to poor air intake. Also here, the capacity of the bomb bay is too small to meet our requirements. Weapon mounting requirements..."

"Mr. Jiang, I think we can learn from some advanced wing designs to improve maneuverability." Wang Mingyuan said.

"Very good, everyone." Jiang Chuan clapped his hands, attracting the attention of the team members.
"Our work has achieved preliminary results. But please remember that this is just the tip of the iceberg, and the challenges ahead will be more severe. We must remain vigilant and continue to work hard."

He couldn't wait to say: "Mr. Jiang, tell me, how should we sort out these problems? I am confident that we can solve them!"

Jiang Chuan looked at the revised design plan with a satisfied smile on his face.

“From what I’ve seen, there are a lot of things that don’t make sense in the original design.”

He frowned and stood in front of the office window of the Oceania Arms Factory, looking into the distance. Outside the window, night fell and the lights began to turn on, but Jiang Chuan's heart was filled with gloom.

"Mr. Jiang, there's news from the supplier." Assistant Xiao Wang hurried into the office with a bit of anxiety on his face.

Jiang Chuan turned around, with a hint of displeasure in his eyes: "Tell me, what happened to them?"

Xiao Wang handed over a report: "The supplier said that due to rising raw material prices and production line failures, certain key materials we need cannot be supplied on time."

Jiang Chuan took the report and browsed it quickly. His face became more and more solemn. The shortage of this key material will directly affect the development progress of the Xuanlong 1 fighter jet.

"We can't wait any longer, we must act immediately." Jiang Chuan stood up with a firm tone.

He personally drove to the industrial park where the supplier was located. Along the way, he kept thinking about countermeasures in his mind. He knows that this negotiation will be a tough battle, but he must win.

When we arrived at the supplier's factory, night had fallen. Jiang Chuan walked into the dim factory building and saw workers busy operating the machines, but the production efficiency was obviously not high.

The supplier's representative is a middle-aged man named Manager Li. He looked a little tired, with a hint of helplessness in his eyes.

"Mr. Jiang, you're here." Manager Li came forward to greet him, with a hint of apology in his tone.

Jiang Chuan nodded and got straight to the point: "Manager Li, I heard that there is a problem with the supply of our key materials."

Manager Li sighed: "Yes, Mr. Jiang. The price of raw materials has risen sharply recently, and our production lines have also experienced some failures, resulting in a significant drop in output."

Jiang Chuan frowned: "This will affect the development progress of our Xuanlong 1 fighter jet. Do you know how important this is to us?"

Manager Li nodded: "Of course I know, Mr. Jiang. We have been working hard to solve the problem, but..."

Jiang Chuan interrupted him: "We need a solution, not listen to you talking about difficulties. Have you ever thought about finding alternatives or adjusting the production process?"

Manager Li was stunned for a moment, obviously not expecting Jiang Chuan to make such a suggestion.

He hesitated for a moment, and then said: "We are indeed looking for alternatives, but we have not found a suitable one yet. As for adjusting the production process, that requires a lot of time and money..."

Jiangchuan interrupted: "Time and funds are not a problem, the key is to solve the problem. I can provide you with technical support and financial assistance, but you must give me a clear solution and timetable."

A trace of surprise flashed in Manager Li's eyes. He didn't expect Jiang Chuan to be so decisive and resolute. He was silent for a moment, and then said: "Mr. Jiang, I am very touched by your sincerity. I will organize a team to study a solution as soon as possible and give you a clear timetable."

Jiang Chuan nodded: "Very good, I look forward to your good news."

After leaving the supplier's factory, Jiangchuan breathed a sigh of relief. He knew that although this negotiation was difficult, he had taken the first step to solve the problem.

Next, he will continue to pay close attention to the development of the situation to ensure that the research and development project of the Xuanlong 1 fighter jet can proceed smoothly.

Jiang Chuan stood at the door of the trial production workshop, frowning. He had just witnessed a production process failure. A complex component developed cracks during the machining process.

"What's going on?" He turned to ask Wang Mingyuan next to him.

Wang Mingyuan is Jiang Chuan's right-hand man and is responsible for the production process.

He wiped the sweat from his forehead and explained: "Mr. Jiang, this material is extremely sensitive to temperature changes during processing. If it is not properly controlled, it will cause excessive internal stress in the material, resulting in cracks."

Jiangchuan nodded, thought for a moment and then said: "We can't stop just because of this small difficulty. Call the technical team together and hold a meeting immediately to discuss solutions."

The atmosphere in the conference room was solemn. The team members sat around the table, all eyes focused on Jiang Chuan.

"There are obvious problems with our current production process." Jiangchuan said straight to the point, "I hope everyone can brainstorm and come up with improvement plans."

Xiao Li, a young engineer, tentatively said: "Maybe we can try to introduce more advanced CNC machine tools to improve processing accuracy and temperature control."

"This is a good suggestion." Jiang Chuan nodded affirmatively, "But it is not enough. We also need to optimize the production process."

Zhang Gong, an experienced expert, added: "We can add a heat treatment link to eliminate the internal stress of the material."

After hearing this, Jiangchuan's eyes flashed with light: "Very good! This is what I want. Not only to introduce new equipment, but also to comprehensively upgrade our production process."

In the next few days, Jiangchuan led the team to optimize the production process intensively. They introduced advanced CNC machine tools and heat treatment equipment, and also conducted systematic training for employees.

However, the improvement process is not always smooth sailing. After the new equipment was put in place, many problems arose during the commissioning process.

The programs of CNC machine tools need to be modified repeatedly, and the temperature curves of heat treatment equipment also need to be accurately adjusted.

Jiang Chuan stood in the workshop, looking at the busy figures of the engineers, with mixed feelings in his heart.

He knew that this project was crucial to the Oceania arsenal and the country as a whole. They cannot fail and cannot afford to fail.

After weeks of hard work, the production process has finally stabilized. The new process not only improves production efficiency, but also greatly reduces product rejection rates.

The team members cheered, but Jiangchuan knew that this was only the first step in a long journey of thousands of miles.

He clapped his hands and signaled everyone to quiet down: "We have indeed achieved a staged victory, but this does not mean that we can relax. Next, we will face more severe quality control challenges."

Jiangchuan's words made everyone present feel a heavy responsibility. They understand that only by strictly controlling every link can the quality of the final product be ensured.

In the days that followed, Jiangchuan led the team to establish a strict quality inspection system.

From the warehousing of raw materials to the delivery of final products, strict quality control points are set up in every step.

Jiangchuan stood at the door of the quality inspection laboratory with firm eyes. He knows that for high-precision products like aircraft, quality control is the lifeline of the project.

"We must ensure that every link reaches the highest standards." He turned to the quality inspection supervisor Guo Dastanson next to him and said.

Guo Dastanson nodded in agreement: "Mr. Jiang, I have developed a strict quality inspection process. From raw materials to final products, every link will be closely monitored."

Jiang Chuan walked into the laboratory and nodded with satisfaction when he saw rows of sophisticated testing equipment.

He walked over to a piece of equipment and took a closer look at the strength testing of materials in progress.

"Will these data be recorded and analyzed in real time?" Jiangchuan asked.

"Yes, Mr. Jiang. We have introduced the most advanced data analysis system, which can monitor and record all test data in real time." Guo Dastanson replied.

Jiangchuan nodded, turned and walked to another area, where the electronic system was being tested. He looked at the busy figures of the engineers and felt a sense of relief in his heart.

However, at this moment, an engineer hurriedly ran over: "Mr. Jiang, we found a problem. There is a slight deviation in the size of a certain batch of parts."

Jiang Chuan frowned: "Small deviation? How much is it specifically?"

"It's only a few microns, but according to our standards, this is already outside the allowable range," the engineer explains.

Jiangchuan took a deep breath, knowing that this seemingly small deviation could have a huge impact on the entire project. He quickly gathered his team members for an emergency meeting.

"We cannot take it lightly just because it is a minor deviation." Jiangchuan said seriously, "We must find out the cause and take immediate measures to correct it."

After some discussion, the team identified the source of the problem and developed a solution. Jiang Chuan felt a little relieved when he saw everyone working nervously and orderly.

In the next few days, Jiangchuan personally supervised the quality inspection work to ensure that every link was strictly implemented in accordance with the highest standards.

He knows that only by strictly controlling quality can we win the trust of customers and market recognition.

However, quality inspection work is not always smooth sailing. During the testing process, the team constantly discovered new problems and challenges.

Sometimes it’s the instability of material properties, sometimes it’s minor flaws in the production process. But every time, Jiangchuan led the team to quickly analyze the cause of the problem and formulate a solution.

Jiang Chuan stood in the engine test workshop of the Oceania Military Factory, frowning.

He looked around and his eyes fell on the roaring engine in front of him, but his heart was full of worry.

(End of this chapter)