Rebirth Online Entertainment

Piggy robot.

As the world's top artificial intelligence software, his level of intelligence is already very high.

Recognizing the content of pictures is only a function of the piggy robot.Naturally, the most critical technology was successfully solved under the artificial intelligence of the piggy robot.In the following time, Xiaobai did not spend too much time upgrading their original Tang Dynasty 3D software.

Many people find it hard to believe that with the help of Tang Dynasty 3D, 3D printing has entered a peak.

That night, Tang Dynasty Software's official website released a news item.

The news said that they will upgrade Tang Dynasty 3D software and add a new function.

For this piece of news, at the beginning, not many people paid attention to it.After all, things like software upgrades often appear in this world, and there is no media that is free to focus on this trivial matter every day.However, when Tangchao software directly revealed that the newly upgraded Tangchao [-]D software could recognize pictures, almost all t-tech media were shaken across the board.

The computer recognizes the picture.

For decades, he was a technical problem.

Even, on this basis, some scientists have proposed the theory of pan-demons.

The theory is very complicated, roughly means that they divide all the pictures into four levels.Then, through the theory of pandemonium, let the computer interpret the content of each layer of pictures.Until the end, the content of all levels is added up, and finally the content in the picture is obtained.

Although this theory seems to allow computers to recognize the content of pictures, it has always existed only in theory.most.He can only recognize some English letters written by humans.

Therefore, the subject of computer recognition of picture content has become a problem that the world has always wanted to overcome.However, I didn't expect that when people were still working hard on this kind of subjects.Tang Dynasty software has solved this problem.Moreover, they also used specific practices.

Regarding this news, many t media couldn't believe it.

Even some scientific researchers in the laboratory jumped out to tell people.To let the computer recognize the content of the picture.What a complicated and difficult thing he will be.As for the information released by the Tang Dynasty Group, they will not believe it.They believe that this is the usual hype of Tang Dynasty Software.

In fact, many times, Tang Dynasty Company did just that.

Perhaps, when you upgrade, you will find out.His identifying picture may be the greatest joke of the century.In other words, his recognition is achieved by another illusion.Just like 4 technology, although Tang Dynasty Group has opened many 4 cinemas.However, he did not implement a true 4 technique.

Therefore, they appeal to users not to be fooled.

certainly.Some software companies competing with Tangchao [-]D also expressed their views.

Like 3mx software, they said it.Do you believe that a company that used their software to make various models a few years ago can now develop in 3D modeling?

This sentence makes a lot of sense.

At that time, Tang Dynasty Group did not enter the field of 3D modeling software, even.When they were making games, they had always used software from other companies.However, with the globalization process of the Tang Dynasty Group.Tang Dynasty Group began to deploy into most influential software in the world.

3 Modeling software is one of them.

Immediately, under the leadership of the Tang Dynasty Group, the Tang Dynasty Group possesses super professional technology.Because of its unique experience in [-]D modeling, Tang Chao's [-]D software once surpassed the established software.Under such circumstances, these established software companies have accumulated a lot of grievances.

Now this time.They are also willing to come out to attack Tang Dynasty software.

At the same time, some media believe that.Why is Tang Dynasty software updating their 3D software at this time.Even throwing out a big gimmick, I'm afraid it's not that simple.We know that 3-printing has become more and more popular at present.As the most important technology in [-]D printing, [-]D modeling has no reason not to grasp it.However, in the software market.Although the Tang Dynasty Group's software has its own characteristics, it does not monopolize the world like the Tang Dynasty Group's Internet.

Well, now that you think about it, it's very simple why they utter wild words.

Nothing else, just to attract more popularity.

After all, with this kind of high technology, he can definitely arouse the interest of many people.

They suggested that some other companies can learn from Tangchao Group when they are developing their own products.

However, the Tang Dynasty Group did not respond much to these opposing media.

They only wrote on the official website that the reason for such a function is to better adapt the [-]D modeling software to the world.As a software company, they have a reason to serve the people.As for whether you believe it or not, will you know when you use it?

Faced with Tang Dynasty Software's neither overbearing nor humble, these media have nothing to do.

It is impossible for them to attack Tang Dynasty Software all the time. If their head office is annoyed, their media will not be able to eat it.After all, the most powerful media in the world is the Internet media, completely surpassing paper, TV, and traditional media.

This is already known from global media advertising costs.

Three days later, all the answers have been revealed.

Users who used to use Tang Dynasty [-]D software only need to update slightly, and the latest functions have appeared.

At the same time, Tang Dynasty Software seems to have considered it long ago.After the first upgrade, Tangchao [-]D automatically jumped out of the usage method of the latest functions.In a small flsh, many users have mastered it directly.Of course, when they saw the miraculous effect of flsh, their eyes widened.

God, that's okay too?

They never imagined that 3D modeling would become so simple with the latest functions of Tangchao [-]D.

Because, from flsh.He has seen it.You only need to upload a picture from your local computer to Tangchao 3D interface, and Tangchao [-]D software will analyze the content of this picture in the fastest way.Then, specific parameters in the picture are extracted.Finally, a simple [-]-model is generated.

Although this 3 model is slightly simple, however.He's done a lot of stuff.Whether it is a beginner or a mature friend, they only need to modify these parameters, and it will be ok.Do it like this, you can understand it at a glance.Easy and convenient, save a few hours.

With such a heaven-defying function, how could they not be crazy?

Moreover, just looking at this function, they have already imagined the efficiency of 3D modeling in the future.

It turned out that they were going to complete a 3 model.No matter how simple he is.Just to make a cup, he needs to set various parameters, which takes a lot of time.However, with this function.You can find a picture that is similar to the cup you want to make, and load it lightly.Then.We can get the 3 model parameters of this cup.At the same time, if you want to have some personality, you can change it a little at this time, just change the parameters.

With such efficiency, I am afraid that anyone who sees it will be too excited to contain it.besides.Another great benefit of this feature is that it makes 3D modeling a lot easier.This not only makes it easy for technicians who already know it, but also for beginners.They will also feel easy...

this point is very important.

Because he knows that many people want to learn 3D modeling, and also want to learn some other professional software.However, because it is too professional, it is too difficult.There are a lot of people who learn half of it.Can no longer learn.The reason is very simple, it is too difficult.Give them a headache.However, now, Tang Dynasty 3D has found the simplest method.Although this method cannot train people into an excellent 3D modeling master, it is still possible to let them complete some relatively simple [-]D models... Moreover, such a method can be popularized.

Once popularized, no one can imagine the power he will generate.

"My God, Tangchao Software has created another miracle."

One of the users sighed.

In fact, it wasn't just him who was emotional, it was almost at the same moment when Tang Dynasty [-]D was updated for the first time.The media has exploded.Just like before, it only takes a few operations to check whether Tangchao [-]D can recognize pictures.In fact, when it was updated that day.Not only similar competitors, but also many scientific research institutions are waiting for this update.

Of course, many media are also included in this.

After all, the Tang Dynasty Group has already chanted the slogan of computer recognition of picture content before.

Now, count people and wait to see if Tang Dynasty Software can do it.

With great anticipation, the Tang Dynasty [-]D software was officially updated.

At this moment, the competitors were speechless.

At this moment, the researchers stopped their own research.

At this moment, the media was surprised.

At this moment, the world changes.

Tang Dynasty Software did it, really did it.

This is not just a small technology, it is also related to the improvement of global computer technology.

For decades, the technology that people have been difficult to overcome has been successfully broken through under the software of the Tang Dynasty.

This passion, this honor, no one dares to compete with it.

At this time, many media have made their responses.What will happen to the world when computers can recognize the content of pictures.

At present, even some media, they dare not guess.However, after this function was upgraded, Tangchao 3D software instantly became the most popular software for 3D modeling.Counting users, they gave up, gave up [-]mx, gave up a lot... and threw themselves into the arms of Tangchao [-]D.

This is not the most important thing, the most important thing is those ordinary friends.They didn't want to learn the software because they found it too difficult.No matter how they learn, they will not learn.However, after this function appeared, they found that 3D modeling has become so simple.

If you don't learn at this time, when will you wait?

Perhaps, in the future, the 3 modeling technology will be popularized just like the technology of Wor office.

At that time, if you say that you don't know how to model 3, you may even not be able to find a job.

For example, in a t company, you say you can't wor.Probably can't find a job either.

All of a sudden, some people of insight began to speculate about the future impact.

Among them, many people of insight have started their actions because of this latest function.

xx middle school.Is one of them.

When the principal of this middle school learned that the latest function had been added to the "Tang Dynasty [-]D" software, he soon issued a teaching category about Tang Dynasty [-]D software.Of course, they will not study in depth.However, it's still okay to teach the basics.

for example.Let the students know how the 3 modeling is built.

After building the model, how to print out various objects.

The principal believes that this will be a good interaction, and it will also give students a lot of insight.

As the principal of a middle school, he should make some contributions to the quality education of the students.

What's more, it doesn't cost much to buy a Tang Dynasty 3D software.Even if it is to buy a 3D printer, it does not need much money.However, with the help of Tangchao [-]D software and [-]D printers, they can successfully attract students and achieve perfect communication and interaction.

Not like before.When they taught microcomputer classes, a lot of students were playing with other things.You say to teach them something to learn, but they still don't learn it.However, with the help of 3 printing technology, coupled with 3 printing, he can quickly increase the interest of students.

In fact.The principal has a good idea.

A few days later, when they had their first 3-printing class, the math kids were going crazy.

"Everyone, the microcomputer class we have today is about 3 modeling."

The computer class teacher looked at dozens of students in the audience.It's just that most students are not very interested in today's computer class.After all, in the microcomputer class, the teacher controls the computer, and they don't have to play.Moreover, some things taught by the teacher.Not much interest either.

This is not the first time I have seen this situation.

but.He still continued with today's task.

Presumably everyone has used a cup, whether it is a glass cup or a plastic cup...

While speaking, the teacher took out a glass cup.

"Just, do you know how he made such a cup?"

After saying this sentence, some students turned their heads and looked at the teacher.

"Hey, the content of today's lecture is weird."

When I came up before, didn't I control the computer, and then said how to operate this and how to operate that?

But now, something seems to be different.

The teacher was very happy to see that a small move had attracted the attention of the students.

"Well, today we are going to talk about how to make this cup. After a while, the teacher will make another cup that is exactly like him. Believe it or not..."

"Tch, teacher, you bought two cups."

Some students immediately joked with the teacher.

Anyway, they are the teachers of the microcomputer class, not the main class, so they are also happy to relax.

"of course not."

"No?"

Can you make another mug without it?

"Could it be, teacher, have you learned how to do magic?"

"Haha, I haven't learned how to do magic tricks. But everyone knows it. Magic tricks are fake, but mine is real. After a while, I'll show you how to do magic tricks. But now I have to do a few steps .If anyone wants to hear it, just keep listening. If you don’t want to hear it, you can play your own business.”

At this time, the teacher is already very confident.

He has already seen the desire of these students, even if they are driven away now, they will not leave.

No wonder the principal wants to open such a class.

If other classes can be like this, it will be strange if their middle school is not the top middle school in the country.

"Okay, let's take a photo of this cup first."

At this time, the teacher picked up the digital camera and pressed it lightly, and the cup was photographed.

"Okay, we've already taken a picture of this mug. Now, we're going to do the second step...that is, upload. We need to upload the picture we took to the computer."

Everything looked miraculous, and the students were so focused that they were afraid of missing something.

"The third step, in our Tang Dynasty [-]D software, we saw this picture. Then, we clicked to analyze..."

Immediately, a three-dimensional three-dimensional model appeared.

"Have you seen this model? This model is the most basic model of a cup. If you want to make a cup, you must first make a cup model. Then, the merchant will start mass production based on this cup model. Make cups. Of course, although the teacher does not sell cups. However, I have already made his model, and I can also make another cup."

"Ah, teacher, how do you do it?"

"It's very simple. I saw this machine next to the teacher."

"It's a Type 3 printer."

"After a while, we will let this printer print out our cups."

Immediately, the teacher began to work, "We prepare the raw material, which is glass powder. Of course, in addition to glass powder, we also need some other things, and we will add it to the printer."

"everything's ready."

Well, now all the steps are done, the teacher only needs to click print lightly.

Then, the teacher can make a cup for you to see.

Immediately, under the expectation of dozens of people, the 3 printers started to work.

Driven by the 3D printer, the glass dust is sprinkled according to certain rules.

Ten minutes later, a brand new glass was officially born.

……

This class was so effective that it exceeded everyone's expectations.

They have never seen so many students' desire for certain technologies.

Judging from this situation, it also inspired the principal to think a lot about his future education.

For example, when teaching, you can't indoctrinate alone, you have to combine it with reality, and you have to make students interested.If it is blindly instilled without any skills, it does not mean that the students cannot accept it.Even if you remember it, how useful is it?

Well, this is a bit off topic.However, in the whole world, this school is just one of them.In fact, there is not only one headmaster with this kind of vision.Especially in western developed countries, those countries with super hands-on ability.Almost unconsciously, they realized that the super-powerful functions of Tang Dynasty 3D would be of great help to [-] printing.

They reason for such a technology, all aspects of training.