The rise of a great power: starting with military industry

Chapter 13 Rectification Training
Will it have a big impact if the entire factory suspends production?
It seems to have a big impact, but in fact it has little impact.

Under normal circumstances, the operating rate is actually very low and the production efficiency is shockingly low.

Because that’s all the production targets for the year!

It is no exaggeration to say that it is less than one tenth of the planned design indicators.

Normally, it seems that everyone is at work every day, but in fact, they are just slacking off and wasting time!

Not to mention just suspending production for a few days, even if it is really suspended for a month, there is no problem.

The workers are undergoing training.

On the one hand, it is ideological mobilization, so that everyone can change the past concept and style of eating from the same pot and not caring about good or bad.

On the one hand, we introduced a production quality system, set up technicians specifically responsible for quality, strictly control production quality, strictly abide by the scrapping of unqualified products and the cessation of use of molds that do not meet quality requirements, production must strictly follow the drawings, materials must be strictly in accordance with the requirements, and no waiting materials are allowed. Any process strictly abides by the three procedures of initial inspection, process inspection, and final inspection.

On the one hand, after communicating with leaders such as Wang Tiezhu and reaching a consensus, Liu Tao decided to rebuild the production model. It would no longer be like in the past where one person assembled everything, but rather an assembly line operation.

Liu Tao spends most of his time and energy on inspecting and repairing machines.

My family knows their own affairs.

The technicians in the technical department can solve some minor problems, but they cannot solve slightly more complicated problems.

Liu Tao had a system, so he did it himself.

With three technicians, they inspected and repaired each machine one by one.

The first machines to be produced were from the two workshops that produced pistols and automatic rifles.

Boring machine, punching machine
Every night, even when it was time to rest, Liu Tao was still busy.

Everyone saw how busy Liu Tao was. Seeing Liu Tao repairing one machine after another, everyone had nothing to say.

Even the broken calipers and rulers were replaced, and the molds were remade.

The machines in the pistol production workshop were the first to be repaired and the first to resume production.

The entire production workshop is very different from before.

The entire production workshop has become much cleaner.

Workshop, started trial production.

During the trial production stage, the production speed is not required, but the production must comply with the requirements of the production quality system, produce qualified pistols, and improve the yield rate.

The production quality technical specialists will monitor the entire process, and they are responsible for personally testing the pistols produced.

Testing the guns is very simple. Just fire three magazines from each gun and if there are no problems, it's done.

This is the final inspection!

In-process inspection, on the other hand, involves continuous spot checks on component sizes and on assembly.

At first, the production workshop's work efficiency was indeed not as good as before. But after just a few days, the work efficiency was on par with before.

Everyone saw the changes in the production workshop and was immediately convinced without any doubts.

range.

Liu Tao was holding a rifle and testing it personally.

This is a Type 63 automatic rifle that he made himself.

Seeing that the machines in the production workshop were about to be repaired and the workers' training was on track, he began to focus on the Type 63 automatic rifle.

He aimed at the target and pulled the trigger.

"Bang!" "Bang!" "Bang!"

A stream of fire instantly spurted out from the muzzle of the gun, and a series of crisp gunshots rang out.

Soon, all 20 bullets in a magazine were emptied.

"The recoil is still quite large. The design of this gun itself has many problems," Liu Tao commented.

The Type 63 automatic rifle is an improvement on the Type 56 semi-automatic rifle and is also the first rifle developed by China. The rifle is 1342 mm long (with bayonet open) and 1032 mm (with bayonet folded), 68 mm wide, weighs 3.87 kg (including an empty magazine and cleaning rod), has a barrel length of 520 mm, a caliber of 7.62 mm, a magazine capacity of 20 rounds (4 per rifle), and a lifespan of 10000 rounds (originally 15000 rounds).

Looking at the virtual panel: [Item: Type 63]

【Manufacturer: Liu Tao】

[Item Level: LV1 (30/10) (Upgradable)]

[Upgrade Points: 2]

[Item status: intact, analyzable]

"Upgrade! Improve accuracy." Liu Tao muttered to himself.

The Type 63 automatic rifle has two very important shortcomings. One is that the shooting accuracy is not high and it often misses the target when shooting. Another reason is that the Type 63 rifle is prone to malfunction.

This defect is fatal. If the gun cannot be used during combat, it will be a big trouble.

It is precisely because of this that the Type 63 automatic rifle was even complained by soldiers, saying that it was not as easy to use as the Type 56 semi-automatic rifle and that the soldiers should give them back their semi-automatic rifle.

The first problem Liu Tao solved was the accuracy problem.

To be honest, Liu Tao is not surprised at all that there are fundamental problems with the Type 63 automatic rifle.

At that time, people across the country were "working hard" and "striving to be the best", launching satellites and creating miracles. The defense science and technology community also followed the trend and worked hard, doing "one day equals 20 years" of work. The Type 63 automatic rifle was developed in such an era.

It's normal to have problems.

No problem, that's hell!

There was a faint light flashing, and the rifle in his hand seemed to have changed, but also seemed to have remained unchanged.

Liu Tao looked at the rifle's data: [Item Level: LV2 (20/100)]

He changed the magazine and fired again.

The changes brought by the upgrade are still very obvious. This time, after firing one magazine, more bullets hit the target 200 meters away.

Bang! Bang! Bang! ~~
The trigger was pulled, a fire snake sprayed out, and a series of crisp gunshots rang out.

After using up all the bullets in three magazines, Liu Tao reloaded bullets into four magazines again.

There are at least tens of millions of these bullets in the warehouse of Panshan Machinery Factory, so Liu Tao won't feel any pain no matter how many bullets he uses.

He loaded the magazines one bullet at a time, and soon all four magazines were full of bullets.

Bang! Bang! Bang! ~~
He pulled the trigger again and fired.

One advantage of this automatic rifle is that it shoots faster than a pistol.

Soon, all four magazines were used up.

Liu Tao looked at the data again: [Item Level: LV2 (150/100) (Upgradable)]

"Upgrade! Stability!"

This time, Liu Tao chose to upgrade in the direction of stability.

For a gun to be called a good gun, stability is absolutely very important, and it can perform stably in the respective environment.

Suddenly, Liu Tao seemed to see a faint light flash on the gun body, and then disappeared in an instant.

The Type 63 rifle in his hand seemed to have changed, but when he looked again, there was no change.

However, the data on the virtual panel clearly showed: [Item Level: LV3 (50/1000)].

With these two problems solved, it can be said that the current rifle can be produced and delivered to the troops, and the troops will most likely be satisfied.

However, Liu Tao was not satisfied with this.

If the troops are willing to accept it, it only means that the previous events can be put behind us, but it does not mean that the production tasks of Panshan Machinery Factory can be increased.

If you want to achieve production targets, the easiest way is to produce products that make the troops very satisfied and the soldiers praise them highly.

Therefore, this gun needs to continue to be improved.

(End of this chapter)