Leopard Tooth

Li Jianrui was still aiming at that person.The man was also looking at them.But how can someone's lethality compare with Li Jianrui's 88 style?Li Jianrui was still nervous. How can the 88-style match the RPG? .Li Jianrui took aim.While simply measuring the current speed.And the speed behind.And wind speed.humidity.Of course, these are rough estimates.Adjust the scope a few times.Li Jianrui stared fixedly at the back.

Li Jianrui's understanding of guns.It's all on paper.He was just a recruit after all. The Type 88 sniper rifle adopts a bullpup structure.Therefore shorten the overall gun length.Improved mobility.At the same time, the straight stock is also conducive to reducing the flipping force when shooting against the shoulder.Improve shooting accuracy.After all parts of the transmitter are assembled.A common spring acts as a hammer at the same time.The role of spring, block iron spring, single group iron spring and trigger spring.There are iron resistance insurance and non-blocking insurance in the transmitter.It constitutes multiple insurance functions.

The buttstock, the upper cover, and the lower cover that constitute the overall shape of the rifle are all injection-molded with super-tough reinforced nylon 3.The barrel blank is quenched and tempered.Improved processability.In the case where the aspect ratio is larger than the shot.Guaranteed the quality of bore processing.

The original requirement of the army is to set the carrying handle.It is convenient to carry with one hand when changing positions in battle.But since the center of mass of the Type 88 sniper rifle happens to be the position of the scope.If the scope is placed on the handle.Will increase the overall gun height.Therefore, during the design, it is determined that the position of carrying the gun with one hand is in front of the scope seat, and the upper and lower handguards are a little forward of the center of mass of the whole gun.And adjusted the size of the right side of the lower guard.Makes it comfortable to hold.And ensure the space between the grip part and the scope.This is also the reason why the number of finger slots on the left and right handguards of the Type 88 sniper rifle is different.After soliciting the opinions of the troops.It is considered that the design can meet the requirements of carrying a gun.The purpose of not setting the carrying handle has been reached.

The Type 88 sniper rifle is also equipped with two sets of sighting devices, an optical sight and a mechanical sight.when using optical sights.Iron sights can tip over.Avoid affecting the aiming of the scope.When using iron sights.The optical sight needs to be removed.Erect the quasi-constellation and the scale base.The sight uses a dovetail mount to combine with the gun.Secured by flag handles.Quick loading and unloading.High repeatability of setting.Accuracy is not affected.Both sets of sights have similar ideal cheek rest heights: 50mm for iron sights.The optical sight is 51mm.They have the advantages of long range and great power.However, they all have the disadvantages of large recoil force, small amount of ammunition carried, excessive mass of the entire gun, excessive length of the entire gun, and poor mobility.

Pull the trigger with the hammer cocked.Pulling the lever drives the trigger lever.Push the sear to rotate.Release the hammer.The hammer is under the action of the torsion of the hammer spring.Swivel up.Hit the firing pin.Achieve firing.

After firing.The recoil of the bolt overwhelms the hammer.The hammer is buckled together by a single sear and a safety that is not in place.After the bolt back in place.The pressure is not in place for insurance.The safety is not in place and the hammer is released and buckled.Release the trigger at this point.The single-engine sear rotates together with the sear.Release the hammer.Hand it over to the sear to buckle.Hammer is ready to fire.Pull the trigger to start the next round of firing.

The better shooting accuracy of Type 88 is also related to its structural design.In particular, the bolt adopts three locking protrusions.When firing, the resultant force direction of the bolt and receiver is basically consistent with the axis of the barrel.Handy for shooters.At the same time, the gun adopts a hammer rotary mechanism that is sure and rapid to fire.The center of gyration is close to the gun's center of mass.And the hammer strike point is on the centerline of the barrel.Improved shooting stability.

Sophisticated optical-mechanical dual aiming device sniper rifle with special emphasis on shooting accuracy.Therefore, the Type 88 has designed two sets of sighting devices, mainly optical sights and supplemented by mechanical sights.

Type 88's iron sights are folding.It does not affect the use of the optical sight after folding.And after removing the scope.Stand up the quasi-constellation and ruler base to aim and shoot; the mechanical sight adopts a rectangular target hole.It is not easy to cause left and right aiming errors.And it is easier to determine the center point than the circular target hole.closer to actual combat requirements.

The lightweight bipod is detachable, foldable, and adjustable in height.The bipod is made of high-strength aluminum alloy.Treated by hard anodizing.There is light quality.preservative.The advantages of wear resistance.But the disadvantage is the lack of strength.If used improperly it can cause breakage.In fact, according to the public reports in the magazine.When the Type 88 sniper rifle was first equipped with troops.Because there is no special sniper training course in the army.Many shooters use the bipod of a sniper rifle in the same way as a light machine gun.Whenever shooting on the ground, I am used to vigorously hoeing the tripod into the ground.The result has been many cases of bipod breakage.So much so that the usage of the bipod is explained publicly by an expert in a magazine.

两脚架的安装在枪管上。这一位置在网上的讨论中备受到质疑。因为支承点在枪管上会对枪管振动造成干扰从而导致散布精度变差。所以现代狙击步枪大多都采用浮置式枪管。而两脚架一般也不会安装在枪管上。但据说由于88式狙击步枪本身的设计精度要求就不高。而所配用的也是普通的机枪弹。因此枪管浮与不浮其影响都不大。那么。88式狙击步枪的精度究竟如何呢。据网上的消息是说在100米距离上10发弹全数散布半径接近于普通胸环靶10环的直径。88式狙击步枪在安排人机操作尺寸和位置时。根据成年人体尺寸和部标准地确定了有关参数。其中优先确定瞄准装置的位置。

88式狙击步枪采用三闭锁突笋的枪机。固定击针。枪机外形看起來就好像SVD/85式狙击步枪的枪机。事实上整个QBU88狙击步枪系统基本上就是85式狙击步枪的缩小、无托、改进版。88式狙击步枪的发射机构由扳机、扳机杠杆、阻铁、单发阻铁、不到位保险、发射机构支架及轴等零件组成。属单发发射机构。

The buttstock, upper shield and lower shield that make up the overall shape of the 5.8mm sniper rifle are all injection molded with super-tough reinforced nylon 3.The basic color is black.Overall uniformity.The outer surface is finely matted.It does not emit light and has a good hand feeling; its heat distortion temperature is high.And the sources are abundant.

The tripod is made of high-strength aluminum alloy.Treated by hard anodizing.There is light quality.preservative.The advantages of wear resistance.Ferrous metal parts adopt chemical composite film-forming phosphating technology.It has thin film layer and fine grain.Strong combination.Its corrosion resistance is more than 10 times higher than that of oxidation.The inner bore of the barrel is reversing plated