alien heir

Chapter 68 Xiaolan's first handicraft class

() After Cheng Yuan's frenzied spending of money, Shangdong Communications Construction Group really lived up to its heavy trust. It took less than a month to complete the construction task ahead of schedule, and built the main building in the factory, allowing the entire Arrow Motors to The factory has a new look.

In the current Arrow Motor Company, the number of factories has changed from the original three to six, and the space of a single factory is much larger than the original factory space, and the best anti-seismic materials are used.

For example, the largest Factory No. [-] is the size of a football field. It can be used as a stadium. However, for future renovations, the No. [-] Factory, which is the size of a football field, did not install a roof, but only built walls and leveled it. It's just that it's covered with a thick plastic film to prevent rain and wind.

In fact, although this Shangdong Construction Group is the construction company with the best qualifications in Shangdong City, it can only do ordinary factory buildings, level the ground, dig a few underground parking lots, and build a few landscape buildings such as gardens and ponds by the way. This kind of work is nothing more than a cover-up for outsiders to see. After all, the factory in Cheng Yuan's mind is a highly automated high-tech factory. Whether it is factory materials or other things, it is normal as it is now. The factory is different, but these things certainly cannot be done by ordinary engineering teams.

In fact, after the construction of these main buildings, Cheng Yuan had people use their own super carbon fiber cloth and graphene film to reinforce these buildings, including different floors in the factory, which were also paved with new The ultra-hard anti-slip nano-composite film with graphene as the main body, the price of these materials alone is absolutely staggering, but outsiders don't know the preciousness of these things at all, they just think they are ordinary reinforcement materials And floor leather only.

Factory No. [-] has been transformed into learning simulation workshops one by one. There are many simulation equipment in it. Employees can learn how to manipulate various highly intelligent machines in the factory, and learn how to repair and maintain the factory in the later stage. As for the maintenance and repair of the different products produced in the plant, there is no need for the employees to worry about it. Now the old employees who have stayed are all sent to the No. [-] factory for re-learning.

As for the No. [-] factory, it is currently the main production factory, and it is also a factory that can be announced to the public in the future, so that people can visit it at will, because Cheng Yuan asked Vivian to help him buy the car production lines abroad, and they were all placed in the No. [-] factory. Therefore, the equipment in this factory is clean and clean, and it can definitely stand the visit and test of others.

Of course, although Koenigsegg is a famous supercar company in Europe, it is not so difficult to buy an advanced production line, but after all, it is someone else's production line, and it is impossible for others to give you the most advanced technology, at most Remove the core technology and give you some more advanced technologies.

The so-called advanced production lines mostly refer to those production lines with high automation and advanced equipment.The production capacity of these production lines is very strong, the degree of automation is high, and the situation that requires manual operation is very small, which can greatly reduce the capital investment of employing personnel.

However, the advanced production line is not a universal production line, and it will not change things out of thin air. In this era, the production line is just a high-level assembly line. Parts, such as engines, transmissions, tires, parking sensors, etc., you have to buy other people's parts, and then the production line is responsible for assembling these things for you as soon as possible.

The unique feature of the automobile production line is that it can produce some automobile chassis and general frame, which is also the most fundamental form of a car.

So, how is a production line set up when it leaves the factory? Then this production line can only produce several types of cars. The main reason here is the limitation of the car chassis. For example, the production line of trucks generally cannot produce cars.

The three production lines purchased by Koenigsegg can each produce three types of car chassis, namely passenger car production line, family car production line, and small truck production line. This is already a relatively complete production line in automobile production, such as the production line for small trucks The production line can actually produce small trucks, pickups and suvs, and the family car production line can also produce vans, RVs, and so on.

Among them, the production line introduced into Arrow Motors is a production line for a large passenger car. The chassis has basically been finalized and can only produce large cars. Moreover, because of the high degree of automation, the whole process is almost controlled by robots. Therefore, if you want to change The production process is very difficult, especially changing the process of producing automobile chassis is very difficult, which is equivalent to changing the entire production line.

So, don't look at so many cars on the street, they are constantly changing the old and bringing forth the new, and they come up with new models, but many of them are small changes, such as changing the lights, changing the front face, buttocks, etc., but the chassis of the cars are mostly the same, this is because Their production line has not changed, and as long as the production line remains the same, only small things such as the appearance can be changed. The core chassis technology inside cannot be changed, that is to say, the skeleton cannot be changed.

In short, the production line in the No. [-] factory can only produce the chassis of large passenger cars at present, and it can produce large passenger cars, and it is only an assembly line, and spare parts have to be purchased separately, but this is not bad, at least it can deceive people and let people enjoy themselves. come and visit,

Factory No. [-] is a material factory, which mainly produces nano-materials such as carbon fiber and graphene. However, these products are mostly reserved for personal use and not for export. It is produced in this No. [-] factory, which is a secret factory.

As for factories No. [-] and No. [-], they are all reserved factories for the purpose of increasing production capacity and product variety in the future, so neither has any production equipment.

Therefore, the current focus of Arrow Motors is Factory No. 3, because here, there are things that cannot be produced at the current technological level of the earth, that is, the Louis VI [-]D printer.

The Louis VI 3D printer, as the name suggests, is the sixth 3D printer produced by Louis, and it is also a printer that Cheng Yuan is quite satisfied with for the time being.

The working principle of this 3D printer is to heat various input materials into a liquid state with ultra-high temperature, and then in a vacuum environment, according to a certain procedure, print out the prototype of the object by spraying and other means, and then go through a series of cooling processes , forming a complete finished product.

At present, the main input material of the Louis VI 3D printer is graphite powder, and then it will produce liquid fullerene or graphene through a series of reactions, and then directly print the liquid or semi-liquid fullerene or graphene through 3D printing. Technology to get the finished product you want, just like kneading plasticine, or making jelly.

The reason why he can only use fullerene and graphene to print things is also because Louis is familiar with the technology of producing fullerene and graphene, so he will make familiar things first, and when this 3D printing technology matures, he can still experiment Print other nanomaterials.

For example, now, Cheng Yuan asked Xiaolan to connect the No. 3 [-]D printer to print the main frame of a car, and the main frame of this car was specially designed by Cheng Yuan by a French car designer. A shape scheme for a concept car, but no prototypes have been produced yet.

The purpose of letting Xiaolan do the production is to verify Xiaolan's compatibility and processing ability with this 3D printer, and to see if Xiaolan, the intelligent program he created, really does what he wants and has strong machine sensitivity.

Sure enough, after Xiaolan connected to the control system of the Louis VI 3D printer, she quickly became familiar with the operation method of this 3D printer. Then, with Cheng Yuan's explanation and encouragement, she used the camera to watch The various car blueprints that Cheng Yuan spread out were retouched by himself, and they were finally printed out perfectly.

After 10 minutes, Cheng Yuan finally smiled in relief after watching the translucent car, which seemed to be made of transparent plastic, had a streamlined appearance, and was slightly different from the design drawings.

You must know that this car printed by 3D printing equipment did not enter the production program into Xiaolan from Cheng Yuan, but asked Xiaolan to use the camera to observe the car design drawings in his hand, and listened to his own explanation , and then figured it out by herself, just like a child learning to paint, she already has her own thoughts in it, not born with it, nor a complete copy like taking a photo.

To put it simply, this car is the first handmade product that Xiaolan personally made according to her own understanding after it was born, and it is also of special significance, and the whole manufacturing process is also her first handicraft class.

After the car was built, Xiaolan seemed to be a little unconfident, so her voice was a little weak: "Dad? Is Xiaolan doing well? Is there anything wrong with it? It seems that it is slightly different from the drawing, but , but I... I always feel that this seems to be better, so I just did it."

"No, you did a very good job! What you did was to modify the flaws in the original design drawing. In fact, the design drawing I gave you was not a finished product, but a preliminary design. How can you do it so quickly? Finding the flaws and correcting them shows that you are good at thinking." Cheng Yuan smiled and shook his head at the camera, "Your learning and understanding abilities have exceeded my expectations, very good, and you must continue to work hard in the future!"

"Yeah! That's great, Dad praised me, Dad praised me!" Hearing Cheng Yuan's words, the q version of the little girl on the computer screen immediately started jumping in place, "Dad, Xiaolan will definitely continue to work hard in the future, Be a good boy to daddy!"

"Yeah." Cheng Yuan smiled and nodded to the camera, "I believe that Xiao Lan will be a capable, obedient, smart and good boy in the future."

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like