Smart Industrial Empire

() It was not until after eight o'clock the next night that Yunfei finally compiled the ladder diagram program of a CNC lathe, and compiled a simple processing program on the cao operation interface that just appeared, without installing workpieces With the tool, run the machine tool dry directly.

Logically speaking, the ladder diagram program of the CNC machine tool that controls the entire equipment cannot be compiled in such a short time.If the people from Fanuc Company find out, those guys will have to commit suicide.But this is all thanks to the time spent on research back then, and the fact that the things in my mind were extremely clear after I arrived in this parallel space, and I was able to complete the long-term work of a team of others in just over 20 hours.

Wang Qingfeng's eyes narrowed when he saw these lost goods that he himself bought for face were turned around.Seeing Yun Fei rubbing his stomach tiredly, he remembered that the child had only squinted on the chair and dozed a few times since last night, and hadn't eaten a few bites.

While Wang Qingfeng ordered his secretary to order food at a nearby restaurant, he took Yun Fei to the office.Anyway, it takes a while for the meal to be ready, so let's take a rest first.

Liu Yushui was also waiting in the office.Yun Fei was extremely tired at first, but after being dragged by the two guys to chat, he gradually became less sleepy. Knowing that Zhang Rui came to urge him, they went to eat together shoulder to shoulder.

When Yunfei went to work the next day after he put the first CNC lathe into operation, Wang Qingfeng summoned all the No. 83 people in the whole factory to the open space outside the office building through the loudspeaker above the office building, and stood opposite the corridor on the second floor. All the people in the factory announced that starting from today, the only 16-year-old Yun Fei next to him will be the master chef of the factory.

Although he didn't see Yunfei's operation equipment at all, he was already convinced by Yunfei in front of the CNC machine tool.He has completely believed everything Yun Fei said.So I said it at dinner the first night, not only fully agreeing to Yunfei's request, but also raising Yunfei's salary from 1000 yuan to [-] yuan. When the factory's efficiency is good, there will be a variable amount of bonus .

At that time, Secretary Zhang Rui could stuff an egg into his mouth.

Wang Qingfeng's words made the whole scene almost get out of control.

Workers also have dignity, especially skilled workers, and even older skilled workers who have worked for decades.All the people were uproarious.

And the consequences of this noise formed the annual technical competition between Qingfeng Machinery and Yunfei Group.

Now that everyone is about to rebel, Wang Qingfeng, who is more sympathetic, will certainly not ignore the voice of the masses.

Of course, this is not a state-owned factory after all, and the boss's words are the imperial decree, and the boss's decision cannot be violated. These workers, who are paid higher wages than those in the same industry, also feel that they should not go too far.In the end, the workers with the best technical ability among the workers discussed that it was not impossible for this young child to become their master master, provided that he had to be technically superior to others like himself.

Yunfei can still understand the emotions of the workers.In his previous life, he was not convinced by those who didn't show off their skills.Perhaps this is the case in the entire industry. As long as it is a comparison and the technology is better than yourself, no matter what age the other party is, they will respect him. This may be unique to skilled workers.

Regarding the workers' challenge, Yun Fei stood in the corridor on the second floor and announced to everyone: Since there are only three types of work in the factory: lathe, fitter, and miller, he only competes with the masters of these three types of work. As for apprentices, Then it's free, it's too expensive.

"It's too arrogant to lose your mother!"

"Tmd, this kid is really arrogant, we must let him know that the buns are made of flour!"

"This guy has a personality. If he can do all three types of work, even if he is not as good as my master, I will recognize him as a master!"

"Yes, yes"

"I just don't know if it's bragging. It's a good show. It's great. I don't have to work today..."

……

Hearing Yun Fei's challenge, the workers and masters boiled, it was a naked slap in the face.Although every type of job today has half a day of being unable to work, it is a matter of dignity, and no one cares about earning five or six yuan less.

And those apprentices were full of admiration, envy and even jealousy towards Yun Fei. Anyway, the boss had already spoken, and the salary was still paid.

The first challenge is to follow the car worker challenge.Yunfei alone challenged thirteen lathe workers with good skills in Qingfeng Machinery Factory, and the question was given by Yunfei—the length of the car.

Each person is issued an 3 mm long A0.05 steel bar with a diameter of 3.2 mm, which is required to be turned to [-] mm, with a diameter tolerance of no more than [-] mm and a surface roughness of [-]. Any means are allowed, and there is no time limit.

As soon as this topic came out, seven old lathe workers who had been laid off from the state-owned factory immediately quit, and only Yang Dezhi and a few young lathe workers who had just graduated from the teacher were left to participate.

Everyone in the industry knows that lathe workers are afraid of poles. On the surface, the requirements are very simple, and workers with a little skill dare not play like this.As we all know, a slender rod with a diameter of 0.05mm and a length of [-]mm has almost no rigidity during processing, and even with an upper heel tool holder, it is difficult to achieve a precision of [-]mm.This not only requires very high technical requirements for workers to sharpen turning tools, but also very high requirements for workers' experience.

Everyone in the industry knows that a lathe worker is seven points for knife skills and three points for skills. Whether a worker's skills are good or not can be seen from the turning knives he sharpens.The processing of slender rods not only has high requirements on the angle of the tool, but also has very high requirements on the matching of the three cutting elements.

It is necessary to perfectly match the three cutting elements of rotation speed, cutting depth and cutting speed. Only in this way can the workpiece be processed quickly and well.

Newborn calves are not afraid of tigers, and the five young turners who did not quit started their work confidently.They believe that this is simply a job without requirements, and it is completed in minutes.

On the other hand, Yang Dezhi adjusted his lathe with a serious face. He knew that in some factories, the test for the eighth-level lathe worker was to turn slender rods, but the requirement was that there was no need for a tool holder.It turned out that in the factory, he had no chance to challenge the ultimate test of the lathe worker. Now, he still wants to try, at least not to let that brat look down on him.

But Yun Fei randomly chose the most shabby-looking machine tool, and everyone around him gasped.This is the lathe with the worst precision in the factory. It is an old equipment supported by the big brother of the Soviet Union for more than five years. The error is almost one millimeter.In the factory, it is only used to pull the blank and rough the workpiece.

Yun Fei chose this device because he was quite confident in his technology, or it was just for show. If the car didn't come out later, he would just say that the device was faulty. It seems that this kid really has a brush or two.

Yunfei spent at least two hours debugging the machine tool.Of course, the reference object for his debugging is his own workpiece rough used to compete with other people.In the past two hours, dozens of people around the machine tool he used were talking about it, most of them thought he was putting on a show, but the seven 40-year-old lathe workers who came out of the state-owned factory didn't think so.

When working with relatively high cleanliness, you must have a good grasp of the performance of the equipment, otherwise the workpiece will be useless if you are not careful.

In the end, Yunfei was the first to complete his work in just over an hour.Finally, after inspection by most of the workers in the factory, they agreed that it was a qualified product.The error is only 0.04 mm, which is completely within the tolerance range.The surface roughness is well over 1.6.

"Damn, if I had known that the final car was squeezed with the horizontal edge of a cutter and then ground with an abrasive belt, I wouldn't have been laid off if I became an eighth-level lathe worker!"

"It's so fucking awesome. You can get this live car out with just one pinch and one top. You can't help but admire it. I really don't know how this kid's skills are trained."

"That's right, it's a lot of experience to actually turn around ten or twenty large workpieces at such a low speed..."

……

As the saying goes, experts watch the doorway, and laymen watch the fun. After Yunfei finished processing the workpiece, almost all the lathe workers who watched his processing felt that their previous knowledge was too little.The exams for the eighth-level lathe workers are rare, and they are rarely able to see them.

When Yunfei was finished, only Yang Dezhi was still busy sweating profusely, and the other young lathe workers had given up.They don't even know how to use the tool holder, they don't need to use the tool holder, and the tip of the knife is hit before it touches the workpiece.There was even an unlucky child who flew the workpiece out, but fortunately no one was hurt.

Yun Fei ignored Yang Dezhi and walked towards the cafeteria under the adoring gaze of more than 30 lathe workers and apprentices.

After eating and resting for an hour, the milling competition began.

The miller's afternoon game is to mill balls.Milling out a 85-diameter ball with a square iron block requires an 90% match with the r-gauge. Similarly, Yunfei milled out a ball with a degree of fit with the r-gauge in less than two hours. Reach more than [-]% of the small balls.Leave the back to more than a dozen millers who have just completed the rough milling action.

Not to mention the fitter competition at night.

Yunfei won without a doubt.

As the saying goes, turners are afraid of turning rods, fitters are afraid of drilling holes, and millers are afraid of rounding.Yunfei chose these things to compete with these master workers. This is to give the master workers of these factories a blow, let them be shocked by their own technology, and thus ignore their own age.You must know that these skills were practiced hard for a long time when he was in school in another era.

In one day, the 16-year-old Yunfei used his own skills and smooth movements to make every master in the factory call him Master Yun.

Thus, the 16-year-old Yun Fei became the master of Qingfeng Machinery in the eyes of the whole world.