Smart Industrial Empire

() "Numerical control of equipment is an inevitable trend in the development of China's equipment manufacturing industry. In addition to those state-owned enterprises in China, there are no private enterprises that research, manufacture, and sell. If all our equipment is purchased from foreign second-hand equipment or simple Numerical control is not only costly, but also not conducive to our future development."

Due to the limitations of his own time, Wang Qingfeng can predict the prospect of the CNC machining industry, but he has no idea about the most critical CNC system of CNC machine tools.

"Hey, I said, Xiaoyun, how can you know so much when you are a little kid? During this period of time when I was outside, I also heard a lot. I heard from my friends that just two months ago At that time, a CNC equipment company was established in Luogang, they mainly produced CNC systems, and we can directly buy their CNC machine tools in the future..."

"What? Guangshu? Is their name Guangzhou CNC Equipment Co., Ltd.?" Wang Qingfeng's words made Yunfei think of a company that was divided into three parts of the world with Japan's Farak and Germany's Siemens in his era, and occupied half of the domestic CNC systems. .

However, although it is a three-legged rivalry with Farak and Siemens, Guangshu's market share is all based on the accumulation of the number of low-end and mid-end systems.High-end CNC systems are all monopolized by foreign companies. Others sell high-end systems, and they usually buy hundreds or even thousands of sets.

There is no localized high-end system, which is an eternal pain in the hearts of all Chinese robots!Especially those senior technicians who use the all-English system, how can they be happy!Who said that the country started late and had a weak foundation!You know, in the mid-90s, there was no mechatronics major yet.

You must know that the main problem of the numerical control system is to combine the machinery with the electronics.There are quite a few mechanical talents, but there are not many electronic talents. Even if there are, they are not enough for state-owned factories. Where can private enterprises find these electronic engineers?

"Yes, but now there are only more than 20 people. It is not as good as our company. I originally planned to visit their company after a while. If it is suitable, I will order a few CNC machine tools." Wang Qingfeng is a little curious, Yun Fei is such a person Kid, it turned out that he was in Shenzhen, how did he know such a small company?

Hearing Wang Qingfeng's words, Yun Fei couldn't help thinking of the information about the company he knew.

Although Guangzhou CNC has a lot of registered capital, it is only a small district-run factory with more than 20 people, and the CNC system it produces is also an imitation of foreign systems.However, although there are few people, the output value is not lower than that of Qingfeng Machinery Factory. You know, these days, a set of CNC system costs [-] to [-] yuan, which is not much different from an ordinary machine tool industry.

"Old Wang, let's also develop CNC systems? How about it?" Thinking of the prospects of the CNC industry and the future market in China, such a big pie, if you don't rush to take a bite, it will be difficult to dispel the hatred in your heart.

If you don't eat this cake yourself, most of the profits in the CNC industry will be made by foreigners for at least ten years.

"Forget it, brother, let's do the processing in a down-to-earth manner. By the way, brother, didn't you say you want to talk to me about the management of our factory? Anyway, it's already off work now, let's go to the small shop next to it for a drink While chatting, I called several people in charge of the factory." Hearing that Yun Fei asked him to invest in CNC, Wang Qingfeng hurriedly changed the subject.

In the past few years, there have been quite a few people in China who want to engage in numerical control, most of whom lost their money, or opened a small factory to imitate the lowest-end systems of the Germans or Ri himself.

It is the small factory just built in Luogang, and it is said that it has invested millions of yuan. nnd, millions of yuan can buy hundreds of ordinary machine tools, and if the business is full, it will cost hundreds of thousands a month.If the numerical control system can't work out, it will be nothing, and there is no room for recovery.

Although he has seen the mechanical processing technology mastered by Yunfei and is very proficient in operating CNC machine tools, Wang Qingfeng doesn't think that a kid like Yunfei can get the CNC system back.No matter how talented Yun Fei is, after all, his age is here. If such a kid can figure out the CNC system, it would be embarrassing for those engineers who have been working on it for several years and have not even figured out the direction!

Originally, it was just a casual remark, but after hearing Wang Qingfeng's answer and seeing his reaction again, Yun Fei felt uncomfortable.When you think about it carefully, this is also human nature.I have been in contact with Wang Qingfeng for less than a month. On the surface, it seems that I have more trust in myself. If he were to gamble all his wealth on a 16-year-old like himself, no one would be such a fool.

After all, his current body looks like he is only 16 years old, although can he be believed to be an engineer who came to later generations to learn mechatronics?

Yunfei is still very familiar with the more commonly used CNC systems in China. If the Farak and Siemens systems ten years later are produced, they can fully occupy the high-end market of this era.

Since Wang Qingfeng is unwilling to do this, it seems that he can only wait for the opportunity, and go out and do it alone when he has money.

When thinking of money, Yunfei thought of the first CNC system developed by Guangzhou CNC—gsk928. He had a deep understanding of this system when he was in school.There are heavy Farak traces, but compared with the Farak traces of KND products of various series launched by the Beijing Third Electromechanical Research Institute, it can also be regarded as a localized product.In this day and age, it's pretty good.

Due to the limitation of industrial control chips, although the gsk928 system has small storage space (24k, 100 programs), slow moving speed (fast moving 15000mmmin, straight line 6000mmmin, arc 3000mmmin), no macro program function, no thread gap compensation, subroutine call With less and no electronic gear function, the screw, driver, encoder and even the structure of the machine tool are all limited by the system. For China, which is almost blank, it is still a pretty good system, at least it can meet the processing of some more complex parts.

The gsk928 system, the most criticized, is not that the system itself has many defects, but that it uses stepping motors instead of the later servo motors.

Anyway, gsk928 will not be successfully developed until August next year, so Yunfei is not in a hurry.Wait for this period of time to straighten out Qingfeng Machinery's affairs, and take a trip to Luogang. If you can obtain shares in Guangshu with the technology you have in hand, that would be ideal. Even if you can't, you should use this system to obtain your own Funding to get started.

In the evening, Wang Qingfeng and the leaders of several departments in the factory sat at a large table in the small restaurant next to the factory.To be honest, it was the first time that Yunfei had dinner with the leadership of the entire factory after he had been in Qingfeng Machinery for so long.

He himself is a person who is not good at socializing, and he also knows that although eating and drinking are more serious these days, inside the factory, he is still relatively simple.Wang Qingfeng, who works alone in Guangzhou, usually deals with it in the cafeteria just like a worker.

Although Yun Fei is not good at socializing, he still has a good capacity for drinking. After a few glasses of beer, he would call brothers and sisters with the heads of various departments.However, as long as he mentions the company's management, not only the heads of various departments will change the topic and are unwilling to mention it, even Wang Qingfeng is also unwilling to talk about this aspect.

The drink made Yun Fei extremely depressed.I was in a bad mood, and after a while, I felt dizzy, and after apologizing to everyone who was having a good time, I left the small restaurant, wanting to take a walk outside.