Smart Industrial Empire

Now I heard, just heard, that the auto industry in the United States, Germany, and devils has gradually begun to replace the large number of experienced and skilled workers that were originally required with automatic production lines.

The reason why it is said is that it is because these high-precision and cutting-edge manufacturing technologies and control technologies abroad are very good at keeping secrets in China.

Devils in particular, never let their self-forgetfulness die, let alone tell China the research direction of these high-end technologies.If China wants to figure it out, the devils will even lead China in the wrong direction.In Yunfei's world, the four-axis linkage machining center with PMC module is the most obvious example.

Numerous machinery manufacturing companies have spent a lot of manpower and material resources to develop such a four-axis machining center. In the end, they found that it is too difficult for such a four-axis machining center to develop into a five-axis linkage machining center!Taiwan's CNC machine tool companies have also suffered a lot.If it hadn't been for spending a lot of money to buy domestic bankrupt CNC machine tool companies in countries with third-rate manufacturing technology such as Italy and Spain, it is estimated that they will never get the production technology of five-axis linkage CNC machine tools.

Mainland China is even more wrong.They were wrongly guided by foreign countries towards high-speed, high-moving light machine tools.However, due to the inability to supply materials in China, the manufacturing process cannot meet the requirements.Only core components and materials can be imported from abroad. The imperialist capitalists are all cannibals. These domestic machinery companies have to spend a lot of money to obtain materials and accessories that are not top-notch abroad.In this way, the produced equipment cannot compete with similar foreign products because of the machining accuracy!

For every mid-range CNC machine tool produced in China, almost one-third of the profits will be handed over to foreigners!Similarly, low-end CNC machine tools are mostly imported because servo motors and ball screws are imported, so the old diplomats have to pay a lot of money.

The lunch was settled casually after being reminded by the waiter. After the meal, the two old guys took Yun Fei to talk about the current situation in China and the direction of development abroad.Yun Fei, Sun Lin, Situ He Yun and the others kept talking about the beginning of the festivities, and then forcibly left under the expressions of the two old men.He was worried about continuing, and the two old guys took him to talk at night by candlelight.He couldn't stand it.

Although the two old men did not give Yunfei a clear answer at the end, they still told Yunfei very seriously that they promised to raise Yunfei's conditions to their superiors and reply to Yunfei as soon as possible.What the two old men said was not the official statement like Zhao Xingbang, which made Yun Fei feel better about the two old men.In fact, Yunfei does not necessarily need to obtain patent rights, but he must ensure that the results of his project will not be easily taken away by others for free.

Otherwise, when he produces such a four-axis machining center in the future, he will face a brutal Chinese-style price war.That's like lifting a rock and shooting yourself in the foot.After all, at that time, he had no way to compete with those state-owned machine tool manufacturers backed by state funds.In the end, what he came up with was the ultimate reason for his business to close down.

Of course, Yun Fei also told several people about his concerns.This made Zhao Xingbang, while full of guilt, have to cooperate with Yun Fei, a young man under eighteen years old, to be convinced by his long-term vision.He only saw the huge market value of this PMC module, but he didn't think about the consequences of simultaneous production of several factories under him.If patents are placed in the hands of the state, they are almost in the hands of all state-owned machine tool factories in China.

There are now hundreds of state-owned machine tool manufacturers in China, and the market demand has not yet been fully cultivated and matured.Hundreds of machine tool companies are fighting fiercely in the domestic machine tool market because of such a product, who still has the heart to do research and production?This is a disaster for the entire Chinese manufacturing industry that is even greater than the impact of the great turmoil more than ten years ago!Zhao Xingbang is not an idiot.Nor is it a noob who doesn't know anything about the market.China has now begun to transform into a market economy. If he wants to rise to the top, he has to keep pace with the times, or he will be eliminated by the whole society.

Including pure market novices like Ma Ji.He was also impressed by Yunfei's long-term vision.While others are still staring at the huge profits brought by this project, Yunfei has already begun to consider hidden dangers.The so-called born in sorrow, die in peace.Could it be that what Yun Fei said?

The second contact with the military made a lot of progress, but Yun Fei didn't have time to get excited.At this time, he is spending a lot of time on lsk9201c1 for the final experiment with Qin Qingshan and a few old guys.

May 23rd, at 3:[-] a.m., Huadu CNC system debugging workshop.

"Master Li, please set the amount of tool compensation to be smaller. When thread turning, set the amount to be smaller. We need more subtle changes in the gap after a few more cuts. Pay attention to record the processing of each cut. The difference between the actual size and the parameters we set, I will go out to smoke a cigarette..." Yunfei said to Li Weiguo, a system debugging technician of Huadu CNC, wearily.

Since the last time he knew that Xiaoping hadn’t made a southern tour, he absolutely believed that such a good opportunity should not be wasted anymore. He must let the chief planner of China’s economic development, who has always attached importance to science and technology, come to Huadu CNC to inspect it. Improving the popularity of Huadu CNC in China will be more beneficial to future development.

After Xiaoping inspected Huashu, Huadu CNC will definitely be shaped into the first independent brand manufacturer of CNC systems in China.This will usher in all domestic machine tool manufacturers who are wild about the CNC machine tool market, and will also be suppressed by system manufacturers such as Devil Fanuc, Mitsubishi, and Mazak, which have an increasing market share in China.They will never be willing to see the rise of China's CNC machine tool industry because of its own mid-range CNC system!

As long as China can produce CNC systems by itself, it will not be able to increase the number of CNC machine tools because the number of CNC systems is limited.Foreign CNC systems are exported to China with strict quantity restrictions. They don't want to lose China, a country where CNC machine tools are almost blank.

In particular, mainland China is the largest export market for Japanese CNC machine tools.Europe has Germany, the country with the highest manufacturing technology, and the production capacity of CNC machine tools in Switzerland, the United Kingdom, France, and Italy is not small. It is difficult for Japanese CNC machine tools to squeeze into Europe; America, not to mention, has the United States With the existence of this technological country with the world's number one manufacturing capacity, the machinery factories in the United States simply cannot allow little devils to get involved in their market.

Japan is close to China, and the moon is the first to be close to the water.Although there is Taiwan, a flea that refuses to admit that it is Chinese territory, and they are competing with them for the market of CNC machine tools, but with Taiwan as a small island as big as a sesame seed, it is undoubtedly a dream to fight naked with devils.Taiwan's CNC machine tool manufacturer, the control system comes from Japan, most of the steel comes from Japan, the ball screw is also from Japan, and the servo motors are even from Japan. If you piss off the devils, cut off these spare parts and see them What to use to produce CNC machine tools!

Although the Western market in China is not as large as that of Japan, since the relationship between China and Japan has always been a flaw in the devil's entry into the mainland market, the official procurement of CNC equipment in mainland China is also a lot of European and American machine tools.

The competition between devils and the Western market is a real battle between gentlemen.

With the CNC system in China, although it will be impossible to produce high-end machine tools due to material problems, it is a matter of time.If you want to curb the development of China's CNC machine tools, avoid the domestic CNC machine tool market from being severely squeezed, and not suppress CNC system manufacturers, is it possible to export ordinary five-axis machining centers or precision-level five-axis or above machining centers to the mainland? Tell China Official: "We will sell you whatever equipment you need, and you don't have to do it yourself. After all, that is a waste of money. Although your Chinese economy has developed a lot, there are still many people who have not solved their food and clothing problems. Question, use this wasted money to improve your domestic infrastructure..." Let mainland China voluntarily give up the research and development of high-end machine tools?

Is this possible?

Japan is definitely the country that knows the most about China in the world.

China will never take the initiative to stretch its neck into the hands of other countries and let others pinch it if they want.Even the weakest Manchu empire, many of them fought many battles with devils from all over the world?

Uncle Mao, who dared to face the US nuclear blackmail, said no to the Soviet Union; Uncle Deng, who forcibly forced Britain and Portugal to return to the border, which one is a weak master?Especially Uncle Deng, who attaches great importance to the development of domestic science and technology, will never let some domestic systems not develop, and agree to buy other countries.

What you have is what you really have.Look at China, those fighter jets are so far behind foreign countries, aren't they still in continuous production?We can't compare in quality, we must use quantity to make up for the lack of quality!

"Xiaoyun, why are you so anxious now? Our system is about to complete the final test, you should take a good rest..." Seeing that Yunfei stayed in the workshop every day staring at the set of lsk9201c1 Qin Qingshan couldn't bear to test, personally participate in the improvement of parameter settings, adjust the servo system and improve the control circuit.Although Yunfei forcibly took 40.00% of Huashu's shares, which made him very upset.

What exactly is this guy stimulated by?

"Old Qin, the system of this lathe series is about to finish testing. It will start tomorrow. Try to contact Huadu Daily and start promoting our system from June [-]. Let everyone know that we have created a Chinese The first CNC system, and it can also control the milling machine and machining center with three-axis linkage..." Yun Fei was outside the workshop, feeling the coolness of the night, and after protruding a smoke ring, he said to Qin Qingshan who was beside him with a worried face. (To be continued..)

ps: keep asking for everything...