Smart Industrial Empire

The appearance of lsk9201, half a month after Zhujiang Daily reported it, finally appeared on the People's Daily under Yun Fei's expectation.

On June 1992, 6, a detailed report of lsk17 appeared on the People's Daily, the most authoritative, largest coverage, and world's largest sales volume in China. This report was even more detailed than the Zhujiang Daily.It not only comprehensively reports the current situation of China's machinery manufacturing industry, but also highlights the difficulties faced by China's machine tool industry in terms of the performance of China's imported CNC machine tools. The emergence of lsk9201 will change the pattern of China's machinery manufacturing industry, and even have a great impact on the world's machine tool manufacturing industry...

The People's Daily also pointed out that after decades of development, China's machine tool manufacturing industry has made considerable progress, but it is still far behind its foreign counterparts.The development of China's CNC machine tools requires the simultaneous development of control systems and machinery manufacturing technology in order to catch up with the pace of foreign countries.

Regarding the emergence of Long CNC in China, the People's Daily commented: Comrade Deng Xiaoping, the chief planner of national economic development, once said that science and technology are the primary productive forces, and practice is the only way to test standards.The emergence of CNC machine tools is the perfect embodiment of science and technology as the primary productive force. Whether the emergence of lsk9201 can stand the test of practice and prove that we have gone further in the high-end field of intelligent machine tools requires the joint efforts of all domestic machinery industry personnel.

The gate of Huadu NC has a 1.5-meter-high wall made of masonry and cement in the middle. The marble on the outside is engraved with the name of Huadu NC Equipment Co., Ltd., and the two sides are bright and dazzling. The stainless steel electronically controlled gate is the same gate as most of Yunfei's later factories.Making this kind of gate has added another good business to Xin Kaixing.Although the principle of this thing is very simple, it is still difficult for laymen who don't understand it.

When Qingfeng Machinery was changed into such a gate, Wang Qingfeng, an upstart, showed off for a long time.As a result, it has been done intermittently for many upstarts.At that time, Yunfei's main energy was put on the CNC system and CNC machining, and the whole Qingfeng Machinery was in chaos.It never occurred to him to engage in this business.

Yun Fei stood at the electronic remote-controlled stainless steel fence door that Huadu NC had just replaced today, smoking a cigarette while repeatedly testing whether there was any problem with the opening and closing control of the door.At this time, seeing Zeng Hongqi and Qin Qingshan coming in from the outside at a brisk pace, he hurriedly stopped them and asked them to comment on this gate with not much technological content.

"Xiaoyun, it's too wasteful for you to do this. The gate is good, do you need to repair it? What you did is too imaginary, and it obviously doesn't meet the above two words of truth-seeking. Wuxin is accounted for, this is 1 More than [-] yuan..." Zeng Hongqi said with a heartache when he saw the newly replaced gate.

Qin Qingshan also nodded in agreement with Zeng Hongqi's words.Not only did Yunfei change the original gate, but he even erected a piece of marble as tall as a person at the place where he just entered the gate, with the words "pragmatic and innovative" engraved on it.Isn't this engaging in formalism!

After Conglong NC was published in the People's Daily, inquiries from major machine tool manufacturers across the country almost filled the office of Zeng Hongqi, who was in charge of system sales.During this time, the heads of several factories were either busy recruiting people, or receiving purchasers from major machine tool companies or machining factories.Yun is not the second shareholder.But he doesn't care about anything in the factory, but now he is leisurely tinkering with the gate of Huadu CNC.

In the original Huadu NC, the gate was made of two iron railings.Opening and closing requires manual work, which is very troublesome.Now it has been changed by Yunfei to an electronically controlled stainless steel automatic door.Qin Qingshan was very heartbroken. The materials for this set of doors alone cost thousands of dollars. If it wasn't for Huadu CNC itself, it would be a CNC system, a simple remote control device like a door.It's just like playing.

"I said, Lao Qin, we are engaged in high-end products such as CNC systems. When a customer comes and sees that the doors of our factory are controlled manually, do you think they can believe that we have really made a system that is more high-end than imported systems? "Yun Fei looked down upon the two bumpkins who had never seen the world.

When Wang Qingfeng came to Huadu NC to ask Yunfei about factory management a few days ago, he saw that the gate of Huadu NC was still a gate with iron railings opened and closed by people, at least he despised Yunfei for half an hour.

Wang Qingfeng's words reminded Yun Fei.Huadu CNC is a high-tech company that manufactures numerical control systems. The gate is not only dilapidated, but also lacks any technological content, so it was immediately decided to replace the gate with a remote control.Qin Qingshan and the others are too busy to take up any land during this period, and they don't bother to care about Yunfei. As long as he doesn't tear down the factory, he can do whatever he likes.Now Qin Qingshan, Zeng Hongqi and the others regretted that when they signed the contract, they were still secretly glad that Yun Fei didn't interfere with any management affairs of the factory. Now they are all busy to death, and only Yun Fei is leisurely walking around the whole factory. Inside sloshing.

Qin Qingshan and the others didn't fully understand Yun Fei, the guy who made them suffer.If anyone complains that Yun Fei is too idle, Yun Fei immediately dangles the page in the crumpled agreement in his trouser pocket that Yun Fei is not allowed to intervene in the company's daily management affairs after acquiring the shares...

On June 1992, 6, Qin Qingshan and others were notified that there would be "important guests" visiting Huadu CNC in July.Qin Qingshan and the others were excited, because they guessed that it was very likely that the secretary of the Zhujiang Provincial Party Committee and some important leaders of the Provincial Party Committee came to visit the factory. I have visited, but no leader has visited a small factory without the slightest reputation.

Yun Fei looked down on a few people, how did they know that the people who would come to visit would be the No. [-] person who would make the whole land of China and even the world tremble when they stomped their feet, would draw a circle in the Pearl River Delta, Then change the old people in China.

Yun Fei was equally excited. For this old man whom he admired so much, the old man who has changed the situation of poverty and backwardness in China for thousands of years, the fellow of his two lifetimes, the old man who had only seen it on TV when he was very young. The old man who regretted leaving the world, how could Yun Fei not be excited to see it with his own eyes this time?

The old man once went to the place where he drew the circle for the second time. He was in Huadu and only stayed for a short 10 minutes!So when he got the news that the old man was about to make a southern tour, he became extremely urgent and kept building momentum for the system he copied.He needs the aura of the old man to shine on him, and likewise, he needs people around the old man to avenge his grandfather in this life.

On July 7st, Wang Qingfeng called Yunfei and told Yunfei that the six Taiwan Youjia processing centers purchased by Xinkaixing through Kmart had already been unloaded at Huadu Port, and they would be loaded and transported to Xinkaixing tomorrow.Wang Qingfeng hoped that Yunfei would go back and check the equipment. After all, in Huadu, perhaps no one knew more about CNC machine tools than Yunfei.

Hearing Wang Qingfeng's words, Yun Fei's heart moved, and he hurriedly asked him to come to CNC Huadu.

"Old Wang, do you want to raise your eyebrows, let the whole Chinese people know you, and make our Xinkaixing more famous?" In Yunfei's office, Yunfei whispered to Wang Qingfeng.

"Think about it, why don't you think about it? You said that I am an upstart, and I can have a chance to be proud, will I let it go?" Wang Qingfeng didn't know what Yun Fei asked him to do, but he closed the door and window from Yun Fei and whispered earnestly If you can feel the way you speak, there must be good things.

"Bring those six machining centers to CNC Huadu, don't ask me why, I can't leave these days, you go back and ask Yang Guang to bring the operator of the machining center with the best technology in the CNC workshop and the three computers. Come here..." Yun Fei instructed Wang Qingfeng.The elderly must see the power of CNC machine tools.

"What...what are you going to do? Yang Guang is here, and there is no one in charge of the day shift. What's going on? Also, if you drop the people from the processing center, what will happen to the production tasks in our factory?" Wang Qingfeng didn't know what Yunfei was going to do. , Yunfei’s investment this time is a bit ruthless. After buying millions of equipment, Yunfei’s factory was installed and debugged to earn back the cost as soon as he bought it. Instead, it was brought to Huadu CNC. What exactly does he want to do?

"Old Wang, don't ask so much about this matter. After Youjia's machining center is installed in Huadu CNC, we will bring the most difficult work of our factory here. We will do it in Huadu CNC. You Also explain the things in the factory, as long as there is only one operator in the machining center, what else should I do?" Yun Fei said mysteriously to Wang Qingfeng.

After all, his matter is speculative, but now I don’t know if the old man will really start the southern tour half a year later. If it is revealed, let alone whether the old man will visit Huadu CNC again. Being put on a big hat by someone is not worth the loss.

Qin Qingshan and others were overjoyed that Yunfei brought the six processing units bought by Xin Kaixing from Taiwan to Huadu CNC.Their lsk9201x1 is now being debugged with a second-hand milling machine imported long ago. The accuracy of the ball screw and the servo motor is not good, and it is impossible to effectively withdraw the control accuracy and control ability of this system.Now that there is a three-axis CNC machining center produced in Taiwan, it is enough to carry out the most complete debugging of this system as long as one is used to remove the control system and install a fancy control system.

In the test workshop of Huadu CNC, a large area was drawn, and six three-axis machining centers from Taiwan Youjia CNC were neatly placed.

Yunfei didn't tell the others about his purpose, but said that these machining centers just arrived, and Xinkaixing's business is not very full, so it's just time to test our own CNC system. If Xinkaixing's business is more , just took it here for processing.Only through complex processing can we find the defects that are not easy to find in the system. (To be continued..)

ps: The history of this chapter has changed a bit, I hope brothers and sisters will not spray.After all, it is written in a parallel space, and it cannot be said that some history is based on our world... Hulu begs...