Smart Industrial Empire

In the end, the factory managers who were notified to come to the meeting, but only came to receive a scolding from Yun Fei, the young boss, didn't know when Yun Fei left.

Except for the managers of several major departments in the factory headquarters office who took the lead in shaking their heads that had been scolded and turned into a mess, and went back to their own departments to scold their subordinates, and a few workshop directors who were promoted from workers' technical positions, there was no one. Man knows how he got out of that conference room.

From the second day onwards, except for the unfinished furnaces in the smelting workshop, all workshops stopped production, and began ten hours of ideological and moral education every day.

Many people complained.

But those workshop directors who wanted to understand directly said to those old friends who were clamoring what to do, if they don't want to do it, get out!All the people are honest.After finally having the opportunity, they moved from the mountains to Rongcheng, the most prosperous city in Bashu, and now they want to move back to live the life of eating and dying like before, no one wants to.

The factory has been in operation for 20 days and has lost several 10 yuan. These workshop directors also conveyed it to the workers in their own workshops.Only then did those workers understand why the always gentle workshop director became so strict and cruel now.

On the second day of the meeting, Yunfei directly dispatched Mao Yingjie and several elders from the headquarters office to the production workshops.

"You go, don't interrupt the production arrangement, just watch for me whether the workers are producing according to the procedures arranged in the process flow. As long as they find out, they will be fired immediately, regardless of the management committee sent by the Ninth Academy." Yun Fei Ru said to several elders.

Mao Yingjie and others were originally unwilling to work as deputy directors of major workshops.Because although they are workers in the 9327 factory, except for the operation of some machine tools in the first few years, they have been doing all kinds of miscellaneous work, such as deburring, such as handling, and finally.Just stayed in the cleaner position for more than ten years.If the colleagues outside know that the newly established Jiuyi Heavy Industry uses cleaners to manage the skilled workers in the major workshops, at least a lot of people will die of laughter.

Yunfei was very upset. He never thought that the equipment failure that he was most worried about did not happen. In the end, the workers who he thought were the least problematic had no problems.

Yun Fei also understands that the reason why the company has so many scraps at the beginning of work is because he lacks a strong workshop director.It can be obtained from the Soviet Union.But in this era, the workshop directors in the Soviet Union were very different from those in China.Moreover, even if the Soviet workshop director is brought in, the problem may become more prominent.

These workers have not worked for several years. Although they have been trained by the organization before, those trainings are not perfect due to various reasons. , Do not shoot out a lot of bullets to find the feeling.You can't train a sharpshooter at all.It is just nonsense to say on TV that those who lie on the ground and practice aiming for a period of time can become sharpshooters.

In the technology industry, if you don't touch it for three days, you will be born.Because many technical jobs, especially those senior skilled workers or technicians, are in the process of controlling precision and quality.It's all about feel to a large extent.At the beginning, Chen Dongsheng did that because he believed in his own strength.A tolerance of seven μ is for a skilled and experienced senior lathe worker.Not a size that is hard to guarantee.

Mao Dongsheng's biggest mistake was when he hadn't done high-precision work for a long time and the feel hadn't recovered.Just start doing it.Unstable feel brings about unstable technical performance, so he fell into the place he is most proud of.

Yunfei's former lathe worker met a senior technician from the capital, who was not working, but performed in major state-owned factories across the country.What he performed was the highest embodiment of lathe technology - mirror turning.

The so-called mirror turning refers to high-speed precision turning of non-ferrous metal parts with finely-researched diamond turning tools on a high-precision lathe, which can make the machining accuracy reach IT7~5, the surface roughness is ra0.04~0.01 microns, and the surface of the parts is extremely smooth , like a mirror.This kind of cutting is generally cut inside the grain structure of the surface layer of the part, so it can achieve the surface finish like a mirror.

The turner who performed all over the country was only in his 40s.If he has been using a high-precision lathe, there will be nothing to be curious about. After all, as long as the accuracy of the machine tool can be guaranteed, a first-class lathe worker can do it.The reason why that man is awesome is that he can achieve the effect of mirror turning with an ordinary lathe. More importantly, what he turns is not a material that is easy to polish like non-ferrous metals, but the most common 45-gauge steel.

But it is a pity that the lathe worker who has performed successfully in many places across the country, when he arrived in Bashu, spent several days debugging the 60 lathe produced in China in the early 6140s in Master Yunfei's workshop.In the end, during the performance, the entire workshop was full of people, and people didn't care whether they could see it or not. Many workers who couldn't see even climbed onto the carriage.

However, under the watchful eyes of hundreds of leaders and technicians, he failed, and finally had to leave resentfully.

At that time, when Yun Fei was studying lathe work with the master who was originally specialized in training senior technicians, his identity warned him.If you want to maintain your skills for a lifetime, you can never stop being a lathe worker. If you don’t work as a lathe worker, you will never be able to keep your state at its peak. If you don’t do it for a long time, you can drive the lathe and process some simple Parts, even you can't even guarantee the tolerance of two or three wires.Because although your mind can still maintain this feeling, your body has already forgotten it.

The reason why Yunfei came to this world and took possession of this world. After Yunfei's body, when he wanted to apply for a job in Liu Yushui's processing workshop, he found that his body still had the feeling for those machine tools.

Excellent technical workers, if they haven't touched the machine tool for a few days, can't help but want to operate it the first time they see the machine tool, so as to satisfy the desire of each memory cell in the body for this aspect.

Take the current Yunfei as an example. If he starts the machine tool again, he will not be able to adjust an unfamiliar machine tool to the best condition in a short time. The slender shafts used by the turners of Qingfeng Machinery for the final test of the eighth-level fitter in the technical competition.

What's more, the processes of various parts in the entire factory are all designed by those Soviet engineers and technicians. These hard-working people are far more capable than Chinese process engineers.Especially in the military factories before the Soviet Union, the main products produced were parts for military products with stricter precision requirements and higher precision levels.

The production of machine tools belongs to mass production. The perfect and reasonable process can not only effectively guarantee the accuracy of the whole batch of parts, but also improve the efficiency.

A skilled turner like Chen Dongsheng is suitable for the production of single-room and small-batch products.

The processing of large quantities of metal parts produced by the assembly line is carried out in different steps. Each process, and even the steps in each process, are divided in detail.At that time, after the turning tool on a lathe is aligned, as long as the operator memorizes the scale, after each product is processed, quickly replace it with another one, and then shake the turning tool to that position through the handle on the middle pallet. On the scale in memory, just hit automatic cutting.

If you follow Chen Dongsheng's example, many steps are concentrated in one process, and the tool must be changed.The tool post on the ordinary lathe has four tool positions. If the tool post is always rotated during mass production, the tool post with low repeat positioning accuracy is not only easy to wear, but may also cause inaccurate positioning.In this way, every time a size is processed, it has to be measured.The production efficiency is not much higher at all.

After Yun Fei scolded those workshop directors, he never went to the workshop again.

He knew these things, and now he couldn't be in a hurry.These workers who have not worked for a long time must be given time to recover their status, so Yun Fei asked those Soviet process engineers and technicians to save a little allowance for semi-finishing when doing the process. , the rest of the machining allowances were left with an extra [-] wires.Anyway, in the processing of each process, even if there is a margin of [-] wires, there will be no extra cut.

In this way, the worker scrap rate will be well controlled.

For the inside of the smelting workshop, Yun Feizhen had nothing to do.He himself doesn't understand that at all, and the Soviet Union has no talents in this field. The only thing he can do is to let the master craftsmen in the smelting workshop discuss and formulate the craft by themselves.

Although a lot of molten iron was wasted in the smelting workshop during the first 20 days of operation, these problems were mainly caused by the laziness of the workers.After years of not working, they have grown sluggish.Now they suddenly go to work twelve hours a day, and they have to do some physical work in between. They must not be used to it at first.

In my anger, I scolded all the workshop directors and threatened to cut their wages. Presumably, these workshop directors who climbed up from the workers will conscientiously implement that I have spent countless time and experience, plagiarizing and revising his own world. The rules and regulations of Jiuyi Heavy Industry come from the various rules and regulations of the machinery company.

As long as the various rules and regulations are strictly enforced, these problems that have arisen at the beginning can be resolved.If these problems are caused by technical reasons or equipment reasons, Yunfei can only cry.

"Ding..." Just as Yun Fei was thinking about finding a quiet place to relax, the phone on his desk rang.

"Xiao Yun, come quickly, we've done it..." Yun Fei just picked up the phone, when a joyful voice came from inside. (To be continued..)

ps: This chapter was coded last night until 01:30.Today, a brother's housewarming is a joy, so he has to go to celebrate.Since Hulu has to go to work during the day, the buddy changed it to night for Hulu. Hulu will see if he can find time to write another chapter when he goes to work during the day. Otherwise, there will be only this chapter today. If you don’t see the second chapter , Please bear with me, of course, the chapter that is owed will definitely be added tomorrow.