Smart Industrial Empire

After the assembly is completed, fill the headstock with oil, add oil to each oil hole on the saddle, and fill the guide rails with oil, and then the final assembly of the entire lathe is completed.

"Director, why don't you go to Xinkaixing and borrow their deputy factory director to help us debug?" After the assembly was completed, Zhao Bingbiao saw that Yun Fei kept going around the machine, leaving only the surrounding protective cover and The CNC lathe on the protective door kept spinning, as if to see where there were any deficiencies from this CNC lathe that hadn't been painted or even scraped the bottom dust.

Hearing Yang Bingbiao's suggestion, Yun Fei couldn't help curling his lips.

This man, it seems that he can't be too low-key.This low-key, these people have even forgotten their biggest reliance on self-made.

"Who of you go over there and help me close the switch!" Yun Fei said to the few people who looked at him suspiciously.

Small sample, I don't show my skills, I really think I am a noob-like upstart boss.Yunfei ignored Zhao Bingbiao and asked someone to close the switch. After the CNC machine tool was assembled, some necessary settings must be made on the PLC. Although most of the functions in it, Huadu CNC had already completed the pre-installation and some conventional functions. parameter settings.

After the CNC machine tool is assembled, the trial cutting process of the parts cannot be started directly, and it must go through a period of dry running.This dry run is like a car that has just finished assembly and has come off the assembly line, and needs to be run-in.

After the power was turned on, Yun Fei directly turned on the main power switch at the back of the machine under the suspicious eyes of everyone, then turned the red emergency stop knob on the PLC operation panel, and then lightly pressed the green start button. Power button.

Soon, the originally dark palm-sized screen began to flicker, and after a while, there were sections of English programs moving rapidly from bottom to top.

Seeing this situation, everyone opened their mouths wide open, who would have thought.This young boss can even drive a CNC machine tool!

It was only at this moment that Yun Fei realized that he had always felt that there was something lacking in his heart.His factory that produces CNC machine tools does not have machine tool debuggers!Although the Soviet engineers had no problem with the design, they only designed the independent mechanical part and the independent electronic circuit part. The boss Yunfei made the assembly at the very beginning.

Regarding the design of this machine tool of Jiuyi Heavy Industry, Yun Fei, the boss who didn't take care of it after the Soviet engineer threw out the assembly drawing as soon as he arrived here, has been keeping a low profile so that people forget what he does.

"Qin Qingshan, an old man, actually wants to wait to see my jokes. He knows that my master is going to produce CNC machine tools. He sent the CNC system here, but he didn't arrange debugging personnel!" Yun Fei scolded fiercely in his heart Looking at Qin Qingshan, an old guy who looks very kind on the surface, but has a dark heart.

One of Huadu NC hangs the chairman's office and the general manager's office. Qin Qingshan, who was almost out of breath under the pressure of orders from the snowflakes, suddenly sneezed, and his left ear turned red instantly. Gotta be piping hot.

"Is someone scolding me? That's right, too many people have been offended. It seems that Yunfei has to be notified to come here to hold a shareholders' meeting. Our expansion of Huadu NC is still too small..." Qin Qingshan shook his head, ready to go to the workshop to have a look.

Ever since Dragon NC went public, Qin Qingshan hasn't had a good night's sleep, many times.Those buyers who came from machine tool factories all over the country would even knock on the door of the general manager of Huadu CNC in the middle of the night.Qin Qingshan firmly believes that Yun Fei said that the customer is God's creed, and he has no temper in the face of God not letting him sleep well.It's just that the system that Yun Fei came up with is too powerful.

I only hate that there are too few workers in Huadu NC!Those hundreds of workers who have been trained for half a year are already competent enough for their work. One hundred sets of CNC systems are born in Huadu CNC every day, but there is no way to deal with the orders that come like snowflakes.

Zeng Hongqi, the executive vice president in charge of business, asked every day to expand the scale of the factory.Qin Qingshan was very much in favor of recruiting new workers, but was vetoed by Yunfei, the second largest shareholder.In desperation, Qin Qingshan, Zeng Hongqi and others could only hide in Tibet every day, not even daring to leave the gate of the factory. Once they went out, they would be surrounded by purchasers from the machine tool factory waving banknotes in their hands...

Yun Fei didn't know, but he wrongly blamed Qin Qingshan.

Although the system was produced by Huadu CNC, this system was taken from Yunfei.Especially later, many ladder diagram programs and parameters in the system were created by Yun Fei.

Since even the most core ladder diagram program of the entire system can be compiled without thinking, and the parameter settings are more proficient than those old guys who have been playing CNC for decades, Zeng Hongqi, who is in charge of the business, has no idea when he arranges people to deliver goods to Yunfei. I never thought that no one in Yunfei's hands would debug the refitted CNC machine tool.

Originally, the number of manpower was tight. If two or three people were sent to Rongcheng for a business trip, and they did not know when the commissioning task would be completed, not to mention that Zeng Hongqi, the vice president of business who had been asking for the expansion of the factory, disagreed. Qin Qingshan, who was carrying out the upgrade of the Long CNC system and the development of the new system, disagreed.

Yun Fei went to Rongcheng to build a factory, which was still a machinery manufacturing factory for machine tools. When he asked for the CNC system, the factory hadn't started. Who knows when he will be able to complete the production of the first CNC lathe?Most of the machine tool debuggers who debug the Long CNC system in Huashu were trained by Yunfei at the beginning. They don't think Yunfei can't debug.If Yunfei will focus on the production of CNC machine tools in the future, it is impossible for him not to train his own machine tool debuggers.

Set up some parameters reserved for machine tool manufacturers, such as the mechanical origin setting of the machine tool, etc.; expand some functions that are not commonly used in ordinary CNC lathes, such as threading on the end face. It is estimated that even Huadu CNC people now I don't know, Long CNC can actually process the end thread.Under the stunned gaze of everyone, Yun Fei quickly pressed his fingers on the operation panel.

With the rapid movement of Yunfei's fingers, the small cursor on the display screen above the blank operation panel kept moving backwards and downs. Every time it moved, a letter or a number would appear on the screen. After a few clicks, the screen was filled with programs.

Most of the onlookers didn't know the program with the combination of letters and numbers on the screen, and they didn't know what Yun Fei was doing.They are experts in the production and assembly of machine tools, but they are especially unfamiliar with CNC machine tools!

"Okay!" Yun Fei let out a long breath, shook the back of his hand that was slightly sore from holding it up for a long time, and said to the crowd.

"That's all right? I'll go find a blank, and find a few turning tools to try..." Yang Bingbiao didn't even know what Yun Fei was doing with these things they couldn't understand. Could it be that he just did it twice? , this machine tool can start processing parts?

"..." Yun Fei was speechless.

After explaining for a long time, everyone with puzzled faces understood that this is just the completion of the setting of some basic parameters of the machine tool and the compilation of the run-in program. Now the machine tool can run, but it is just a run-in CNC system. For the simplest operation of machine tools.

Yun Fei lightly pressed the green button once, and the spindle of Jiuyi Heavy Industry's first CNC lathe without a mechanical chuck started to turn slowly under the gaze of everyone.Simultaneously, the bed saddle on the guide rail begins to run back and forth rapidly along the guide rail, and the middle supporting plate is also constantly moving back and forth.

While observing the movement of the tool post, Yun Fei explained to the main force of future assembly the necessity of debugging after the CNC machine tool is assembled.

Because in his own world, he also went to many CNC machine tool manufacturers to see the assembly line of CNC machine tools up close, but when Jiuyi Heavy Industry first started production, he put the most important training on the debugging of CNC machine tools. Personnel are forgotten.

If it hadn't been for this CNC lathe that appeared at least half a year earlier than planned, he would never have remembered that there is the most important debugging process after the CNC machine tool is assembled.If the CNC machine tool is not debugged, no matter how well it is assembled, it is impossible to have good machining accuracy.

Yunfei has never been so dissatisfied that his job in the original world was not in a CNC machine tool manufacturer, but as a technician in a production-oriented machinery company that used CNC machine tools.

Fortunately, Jiuyi Heavy Industry's current CNC lathes are only experimental production, and there is still a long time for training the personnel who debug the machine tools.Just record the program for debugging the machine tool, and then record some parameters that need to be set by the machine tool manufacturer. The future debuggers only need to enter these parameters into the CNC system, and after setting things such as the origin of the machine tool, enter the debugging program. It can be used to debug CNC machine tools.

As for the detection of assembly problems, most of the problems can be found during the machine tool debugging process. As long as there are no problems after debugging, the CNC machine tools produced by Jiuyi Heavy Industry can enter the market without trial processing of complex parts on the machine tool. .

Now that the problem has been discovered, it is necessary to start improving it now. Yunfei asked Yang Bingbiao to find a few 30-year-old six- and seven-level assembly fitters in his assembly workshop, and called Qin Qingshan to ask him to send the best machine tool debuggers. After lending it to myself for two months, I began to train those future machine tool debuggers, and at the same time began to conduct processing tests on this CNC lathe that was moved to the finishing workshop.

Yun Fei, the young boss of Jiuyi Heavy Industry, is immersed in the experiment of machine tools, and has no idea that his machine tool factory, which has no reputation and has just been established for only two or three months, has already been promoted by the most mainstream media in this era. Next, let all domestic machine tool manufacturers remember the name of Jiuyi Heavy Industry. (to be continued..)

ps: Kowtow to thank Bingzhihen for the great reward, and the monthly ticket for the free and unfettered scholar...