Smart Industrial Empire

"Where did you get the production technology of the CNC milling machine? From the Soviet Union? Their own CNC technology is not very good! How good can the CNC machine tool you researched be?" The whole workshop is [-] meters long, and the CNC milling machine The assembly area was surrounded by a wall to prevent anyone from peeping into the secrets inside.

Li Lu does not believe that Jiuyi Heavy Tools has the ability to independently develop CNC milling machines and machining centers.In the whole country, there are quite a few people researching in this direction. Even if they are researched, they are just some of the most low-end junk products that cannot compete with foreign CNC machine tools.

Even the Capital No. [-] Machine Tool Factory, which is the most powerful in domestic milling machines, can only import ball screws, servo motors, and the most precise spindles from abroad for imitation or assembly.Limited to domestic casting technology and material factors, even the most critical large castings such as columns, bases and saddles used on CNC milling machines, there is no way to compare with foreign ones in terms of performance.

For domestic castings, the internal grain structure is not only uneven after the microscope is magnified, but the largest grain structure will even exceed the smallest by several times or even dozens of times!There are also many fine air bubbles and trachoma.Foreign castings have a very uniform grain structure, and under a thousand-power microscope, they are only the size of a grain of rice, while Chinese castings are larger than soybeans!

Although Li Lu has never been to the production workshop to observe, she still has a good understanding of domestic CNC milling machines.Kmat now has a general business of CNC machine tool trade, and of the CNC machine tool trade that accounts for half of the business, more than [-]% are CNC milling machines and machining centers.With the growing economic vitality of the Pearl River Delta and the establishment of more and more processing enterprises, the domestic market, especially the most dynamic Pearl River Delta and the Yangtze River Delta, for advanced processing equipment such as CNC machine tools that represent efficiency, Demand skyrocketed.

Although Kmat has many foreign customers.However, the number of machine tools they got was far from satisfying the demand of the domestic market.

Li Lu and Ren Zhiguo are both children of the military compound. Through the relationship between their parents, they are quite familiar with the high-level executives in the Capital No. [-] Machine Tool Factory. Many times, they will import a small amount of key parts from abroad through their relationship with foreign countries. Provided to the Capital First Machine Tool Factory to produce some low-end CNC milling machines to meet the urgent needs of some customers.

This guy Yunfei brought back a lot of engineers and technicians from the Soviet Union who were involved in industries related to CNC machine tools.Although there are not many experts at the expert level, most of the engineers from the Soviet Union are hard-working technical talents with rich experience, not those guys who have a relationship with Tong Tong and who are in the position of a vegetarian.It is not the technology of the Soviets that they have developed the CNC milling machine so quickly, can it be the technology of the Chinese themselves?

"What are you talking about? If the Soviets had such CNC technology, they would have had to go to great lengths to obtain CNC machine tools from the devils?" Yun Fei was very unhappy with Li Lu's words.

Needless to say, Li Lu must have suspected that Jiuyi Heavy Industry's CNC machine tool production technology came from abroad.Otherwise she would never have said that.

"These Soviets were brought here with your help, and it's not like you don't understand their details!" Yun Fei said to Li Lu angrily.

When Ni Lishuang heard what Li Lu said, she also pouted and stared at Li Lu angrily.

"This CNC milling machine was designed from the beginning. It has been more than half a year since the first batch of test machines were assembled. Those Soviet people, when they first arrived in Rongcheng, Brother Yunfei had already given the design ideas of the CNC milling machine to him. It was provided. However, there has not been much progress until four months ago, when academician Sun Lin and academician Situ Heyun from the Academy of Mechanical Engineering of the Capital Academy of Sciences joined. Only then did relatively rapid progress..." If Not worried that Li Lu would continue to speculate randomly, Ni Lishuang would never tell her the research progress of Jiuyi Heavy Industry's CNC machine tools.

"What? You asked Grandpa Sun and Grandpa Situ to work for you?" Hearing Ni Lishuang's introduction, Li Lu's face was full of disbelief.

Two academicians, Sun Lin and Situ Heyun, are actually in Jiuyi Heavy Industry?

What kind of company is Jiuyi Heavy Industry?It is estimated that the entire machinery industry now knows that Jiuyi Heavy Industry is now the only company in China that is fully privately held.Although most of the production equipment and workers belong to the No. 9327 Institute of Machinery in name, and the establishment is still in the [-] factory. Anyone who understands it knows that this is just a helpless move by the military because they cannot support these workers. .

Yun Fei chuckled, and Ni Lishuang was noncommittal.This is not to let these two academicians work for themselves, but they are crying and begging to be the project supervisor engineers of their own CNC milling machines.

At the beginning, Yunfei asked the two old guys for help just so that someone could unite the scattered Soviet engineers.Among these Soviet engineers, the two old guys are not much more accomplished in mechanical and electrical control than the engineers and technicians from these Soviet research institutes.

The Soviet Union's achievements in heavy industry are not comparable to China.

What makes Yunfei most depressed is that these old men seem to have gotten into a dead end. In the design of the CNC milling machine, the material strength is not enough, so the diameter and thickness of the parts are increased, which completely inherits the old men's various military products and production equipment. Big black and thick style.

If Yunfei really produced such a CNC machine tool, it would probably make the entire industry laugh out loud.

"Be careful, it took more than a month to make these two main shafts, don't wait until the final assembly moment to be broken by you..." Before Li Lu could reach the door, she heard the sound coming from inside. Sun Lin's familiar voice was heard.

"Grandpa Sun is really old and strong, you still don't get off work to rest at this late hour!" Li Lu left Yun Fei and walked into the area isolated by the wall, and saw Sun Lin nervously staring at three people in their 40s and 50s. Workers lift a part to a place as high as a person.

Sun Lin turned his head, only to realize that the girl in front of him was Li Lu, and his anger dissipated instantly.

"Girl Lu, why did you come here?" Sun Lin was curious as to why Li Lu appeared in the assembly workshop of Jiuyi Heavy Industry.

"It's been a long time since I saw you. I came from Huadu to see you..." Li Lu stepped forward and hugged Sun Lin's thin arm, shaking her coquettishly.

Seeing this movement, Yun Fei's eyeballs were about to fall off.

Li Lu, who has never looked like a little girl, can act like a baby!

"Stop doing this..." After Sun Lin saw Yun Fei appearing, he immediately figured out Li Lu's purpose for coming here.

Kamat was originally a company set up by the military to dump some equipment and electronic products that could not be produced domestically.Now that the international situation is gradually improving, the military has gradually loosened its control over Kamat, and it has gradually faded away from the management aspect.Now Kamart's CNC machine tool trade has a very heavy proportion.Li Lu came here and entered the assembly workshop. If she still couldn't guess her purpose, Sun Lin's decades of life would be in vain.

"Uh, Grandpa Sun. I really came to see you. Brother Zhiguo said that you are doing research on four-axis machining centers in Jiuyi Heavy Industry. I am bored, so I came to see you, old man. By the way, I will see your research. CNC machine..." Li Lu didn't feel the slightest panic about being exposed in front of Sun Lin. It seemed that she had done such things before.

Seeing this scene, Yun Fei was dumbfounded.

From the time I met Li Lu to the present, although we haven't been together for a long time, no matter what I saw with my own eyes or heard from others, Li Lu has never had such an image of a child.Li Lu's current performance has subverted Yun Fei's long-standing understanding of this strong woman.

However, Yun Fei found that there was no affectation on Li Lu's face.It seemed that the current Li Lu was the real Li Lu, and the one she knew before was just a woman wearing a mask.Only Li Lu like this made Yun Fei feel real.

In the beginning, Yunfei pestered Li Lu to recognize her as her sister, but Yunfei just wanted to reduce the import fee of some CNC machine tools, and use Li Lu's background to help him get the people he needed from the Soviet Union.Later, with the establishment of Jiuyi Heavy Industry, there were fewer interests.

Yun Fei is just an ordinary and ordinary woman, and she has always been indifferent to Li Lu, who seemed to be out of this world.If it wasn't for the radio and communication engineers he needed, Yun Fei would never agree to Li Lu living in his home.

"Are you here to see the CNC machine tool? I guess the old man who came to see me by the way is trying to make me happy..." Sun Lin took off his hand, and patted Li Lu's head lovingly.

"Hehe...Grandpa Sun, that little bastard Yun Fei is hiding things from me, and he doesn't even give me the agency right in the Pearl River Delta... If I didn't come to Rongcheng to see it in person today, I guess I'll wait until these CNC milling machines are flooded. The entire market is full, and I don't necessarily know that these CNC milling machines are actually made by your old man..." Li Lu complained to Sun Lin about her dissatisfaction, while flattering Sun Lin.

"It's rare that girl Lu, who never flatters anyone, flatters the old man, but this CNC milling machine is not the old man's credit. Say, what do you want to know? Absolutely know everything, talk endlessly, we old man must be worthy of your horse Fart, isn't it?" Sun Lin said with a smile to Li Lu.

If you don't have anything to show your courtesy, you can either rape or steal.This girl, she used to hide away when she saw herself.But after all, he is the child he watched growing up, as long as it doesn't involve some confidential things, he can talk about it.

Now Yunfei's Jiuyi Heavy Industry, for Li Lu who secretly has a military identity, what else needs to be kept secret? (to be continued..)