Smart Industrial Empire

After the security guard took Yang Guang and Zhou Bin out of the office, Yun Fei slumped on the chair as if all his strength was taken away.

Human desire is too difficult to grasp.Zhou Bin and Yang Guang, with an annual salary of more than [-] yuan, are still not satisfied.Yun Fei couldn't figure out the simultaneous betrayal of the two people in Xin Kai Xing that Yun Fei liked the most. Except for work, there was no connection at all. Who connected them together?

In the middle, there will definitely be a factor of interest, but it is definitely not the main one.Otherwise, the current vice president of Rongcheng Jiuyi Heavy Industry should be Yang Guang, not Wu Zhongda.However, this may also be a matter of Yang Guang's vision. Only Yang Guang can tell Yun Fei why.

"Brother Yunfei..." Seeing Yunfei's appearance, Ni Lishuang didn't know whether to comfort him or ask Yunfei to answer his doubts.

"Shuang'er, don't worry, I'm fine. It seems that we won't be able to go back to Rongcheng in a short time. You can call Mao Laosi, inform Wu Zhongda, and tell him about our situation..." Yun Fei Seeing the worry on Ni Lishuang's face, he squeezed out a smile.

Xin Kaixing's current situation, it can be said that all of this was caused by Yunfei himself.His existence gave the factory director a highly centralized power. After he left, he did not take measures to limit the rights of the factory director because of his pure trust in one person.This year, because of Jiuyi Heavy Industry, he didn't even go to Huadu at the end of last year. Even if he received Xin Kaixing's financial statement, he just glanced at it and put it aside.

Wang Qingfeng, the largest shareholder, was also implicated by Xin Kaixing in Rongcheng. He often traveled between Rongcheng and Shancheng. At the end of the year, he had to go back to his hometown in Northeast China to be with his family, especially when he gave birth to a daughter. Zhang Rui is in the northeast.His daughter and Zhang Rui are in the same boat, Wang Qingfeng simply doesn't have enough time and energy to manage Xin Kaixing.When the shopkeeper got used to throwing his hands away, how could he still bow to himself like before when Yun Fei was not around?Xin Kaixing has a group of his old brothers guarding him, and he doesn't think there will be any problems.

"Brother Yunfei, those CNC lathes are no different from the CNC lathes we produced. How did you find out?" Yun Fei just called Wu Jianguo and Yang Dezhi back, lit a cigarette and thought about where to go Where can I find professional management personnel to manage Xin Kaixing, Ni Lishuang asked the doubts in her heart, she really couldn't hold it back.

"Shuang'er, you are not in this business. So in your eyes, these beds are no different from the CNC lathes we produce. If you just look at it from the outside, you can't tell it, even I can't tell it. We The CNC lathes we produce, except for the ball screw, are our own production, and the other key parts are also imported, without turning on the machine tool, you can’t see it at all!” Yun Fei explained to Ni Lishuang.

If it wasn't for him here, Wang Qingfeng and those who don't know much about CNC machine tools would not be able to find the tricks here.

"Then how did you see it?" Ni Lishuang was puzzled, Yun Fei didn't even see it himself.Then how did he find out that the CNC lathes in that workshop were not produced by Jiuyi Heavy Industry?

"If Yang Guang said that these equipments are idle because the processing business is not full, I will not touch those equipments. Most of Xinkaixing's precision processing business is through the processing of foreign trade parts in the hands of Kmart and Most of the military’s precision-processed products are business that I negotiated when I was the deputy director of this factory. He knows that I understand, so he can only answer me that these equipment are Except for the fault." Yun Fei's face gradually returned to normal.

If he returned to the factory this time, Yunfei would not have thought that the few people he had placed in the entire factory had disappeared, and the entire production workshop was completely lacking in management. Zhou Bin and Yang Guang were able to join forces to steal and sell the mid-range CNC lathe transferred by the company Jiuyi Heavy Industry.These lathes are all mid-range lathes with top configuration, and the price in the market is more than 17!

"Except for a few factories in China that use Huadu CNC's Long CNC system, many of them are Fanuc systems imported from Japan or Siemens systems imported from Germany. Since they want to imitate Jiuyi Heavy Industry's CNC lathes, people can't see it. Something went wrong, so they can only use the Long CNC system produced by Huadu CNC. But they don’t know that the most critical part of Jiuyi Heavy Industry’s CNC lathe is actually on the system.”

The CNC lathe of Jiuyi Heavy Industry, which replaced the eight-bit chip with the 32-bit chip, has only very subtle differences in the boot interface and operation interface. Those who are not particularly professional will not be able to find it at all.Because of the modified system, all control codes, programming formats, and tool setting methods are no different from Long CNC.

The system modified by Jiuyi Heavy Industry is very different in the parameter setting of the machine tool.

The machine tool parameters in the CNC system, except for the part set by the CNC system manufacturer, some of the most machine tool parameters, such as the mechanical origin, the maximum speed limit of the machine tool, and the maximum moving speed control parameters, are all set by the machine tool manufacturer.To enter these parameter setting interfaces, it is impossible to obtain the password if you are not a key technician of the machine tool manufacturer.

The parameters set by the machine tool are the ultimate trump card of the CNC machine tool manufacturer.If there is a problem with the parameter setting of the sold equipment, the machine tool manufacturer would rather spend a higher cost and send professional parameter setting personnel from the company to the customer's workshop, and would not tell the customer to enter the most basic parameters Set the password for the interface.The more high-end CNC machine tools, the more precise the CNC machine tools, the more important those parameters are.

These parameters were all explored after countless experiments.

A large part of the setting parameters of the Long CNC system was provided by Yunfei, and the debugging of Jiuyi Heavy Industry's CNC lathe was also led by Yunfei himself.With the system turned on, once the machine tool is running, it is possible to know exactly where the problem is.

"The maintenance of CNC machine tools often involves the modification of parameters. After opening the machine tool, I found that there is no problem with the system. After entering the parameter page, I found that these systems are not ours. Finally, look at the end of the guide rail. I found out that there is no special serial number of Jiuyi Heavy Industry in the place that is not easy to notice. It is also like that, I found out that these CNC lathes are not from Jiuyi Heavy Industry, but produced by those factories outside. In terms of machining accuracy, CNC lathes are simply not comparable to our machine tools. The main business of Xinkaixing’s machining is either military products, or foreign trade workpieces from German idg and emg companies, and some from the United States. The business of these companies not only requires high precision, but also high appearance quality. The CNC machine tools produced by other domestic machine tool factories cannot make these parts at all! Buying imported CNC lathes that can do these jobs, even second-hand Yes, it costs more than 15 yuan, we can produce such equipment now, why should we let others earn our money for nothing?" Yun Fei explained to Ni Lishuang while thinking about the whereabouts of the batch of CNC lathes.

Ni Lishuang didn't know much about CNC machining, but after listening to Yun Fei's words, she still half-understood.

"Brother Yunfei, if you say so, how does the company complete these businesses?" Ni Lishuang grasped the key point.

Originally, Xinkaixing didn't have many CNC lathes that could produce foreign trade products for tooling from companies like idg and emg. The output was transferred to Xinkaixing [-] units.

"This is another problem. Now the profit of the foreign trade processing business in the CNC industry is far higher than the domestic machining profit, especially for the difficult and high-precision business. The profit is even higher. Xin Kaixing In China, from a small factory with only 70 to 400 ordinary machine tools and 1000 to [-] employees, it has developed into a machining workshop with more than [-] people, close to a hundred CNC machine tools, all because of the CNC machining business. At the time of Qingfeng Machinery, the first batch of stainless steel thin-walled parts we made, regardless of the cost of the machine tool, the labor cost was only less than [-], and the processing fee for each product was more than [-]. There are dozens of kilograms of stainless steel shavings that cost hundreds of dollars. How much profit do you think there is in it? Since they replaced these CNC machine tools with some junk CNC machine tools, they will definitely get the processing business to that batch of equipment The processing factory is sitting here. With full operation, the cost of the machine tool will be recovered in less than half a year!" Yunfei is very familiar with the tricks in the middle.

"They are borrowing chickens to lay eggs!" Hearing what Yun Fei said, Ni Lishuang finally understood.

Zhou Bin put these advanced equipment outside, and then bought some equipment with low precision from outside. Xinkaixing will definitely not be able to produce products that meet customer requirements. If the company wants to deliver goods within the period required by customers, it must These products should be outsourced to processing plants with strong processing capabilities.

"Then the purpose of changing those processing centers is also the same?" Ni Lishuang finally understood why Yunfei first went to Kmart to copy the list of equipment transactions between Kmart and Xin Kaixing in the past year.

Since Zhou Bin and the others dared to replace the CNC lathes produced by Jiuyi Heavy Industry, they would definitely replace some of the new machining centers they bought.In this way, they can get more processing business transferred through Kamat, and their profits will exceed Xinkaixing in a short time.Because Xin Kaixing's equipment has been reduced to their rough processing factory. (To be continued..)

ps: Thanks to the readers who are about to qualify, Vigo's War, and the brothers of Tianya Sea Reef for their rewards...