Smart Industrial Empire

"Are you an expert from the Soviet Union?" Facing the blond and blue-eyed caucasian in front of him, the old man asked curiously.

Jiuyi Heavy Industry has many engineers, experts and senior skilled workers from the Soviet Union. Many people in China know about this.After the disintegration of the Soviet Union, China took the opportunity to network a lot of experts to contribute to the national defense of China, which became the leader of the red camp after the Soviet Union.

However, most of the experts from the Soviet Union are in the Chinese military factories, and it is difficult for the outside world to see them.However, after Kamart started the headhunting business, a large number of Soviet engineers and technicians were fooled into China. This is a very common phenomenon along the coast.

The experience and skills of Soviet engineers and technicians are much richer than those of Chinese who have not received professional training, and the cost is much lower than that of engineers and technicians in European and American countries. favor.

"Yes, Mr. Chairman!" Tanalia didn't know that the old man had retired a long time ago.

"Mr. Deng, this is the chief engineer of our Electronics Division, Tanalia, from Ukraine." Regarding Tanalia's address to Mr. Deng, Yunfei didn't know whether to correct it or not, anyway, It's not his turn to intervene in this matter.

"Oh! Ms. Tanalia, I am an old man who has already retired. You can be like them and call me Mr. Deng. Thank you for your contribution to our CNC machine tool business in China. How is it? Are you still used to it in China? ?” The old man did not expect that the chief engineer of the Electronics Division of Jiuyi Heavy Industry was actually a skilled person.

"Thank you for your concern. Our boss is very kind and has created a good research environment and living environment for us. This is much better than in the Soviet Union..." Tanalia did not forget to take a picture at this time The ass of her young boss.

She knew that only by making her boss feel comfortable, could she sign the research project they declared and then pay for it.

While listening to Yun Fei's introduction, Mr. Deng shook hands with the project leaders of these research teams, most of whom were from the Soviet Union, for everyone.All thanks.

The old man was a little surprised that Vesalion Lovech was standing side by side with Sun Lin and Situ Heyun in the research team. While shaking hands with him, he cast a questioning look at Yunfei .

Yun Fei put his mouth close to the old man's ear, and whispered something, which made the reporter who was several meters away very curious.However, this scene was captured by almost all the reporters.

This old man's visit was originally of a private nature, and the outside world had strong curiosity about the mysterious Jiuyi Heavy Industry Research Institute, which was established not long ago.

It is reported that this private research institute has many major scientific research projects.The state did not approve the project, and the boss of Jiuyi Heavy Industry paid for it privately, and it was not reported to the state!

This photo alone can make all the reporters feel that this trip is worthwhile.The old man after retirement, the young rich man who has just grown a beard on his mouth, and the young leader of the high-tech project research team!There is too much content hidden in it that is worth digging.

It is a lot of private things that cannot be published in the newspapers, but what major projects in Jiuyi Heavy Industry's research institute can't let most of the state ministries know?

Jiuyi Heavy Industry, like the municipal government of Chengdu City, did not hold any welcome ceremony such as flowers, but let a group of middle and high-level officials greet them outside the office building, and then brought the inspection team to the production workshop.

"These equipment. Most of them are old equipment in the original 9327 factory. After being repaired and modified by researchers from China and the Soviet Union, they can save energy by about one-third compared with the old models, and at the same time, the production efficiency has increased by 20.00%." ​​The government did not Arrange visits.The whole delegation visited Jiuyi Heavy Industry according to the route arranged by Jiuyi Heavy Industry.

In order to let these people who are not professionally born, and even do not understand how CNC machine tools work, have an intuitive understanding, under the joint decision of Yun Fei and Xie Heping, the inspection team went directly from the smelting workshop of Jiuyi Heavy Industry Co., Ltd. visit.

This visit itinerary.In fact, it is the entire process of CNC machine tool production.

However, since the old man is already 91 years old, the delegation was divided into two parts again. Most of the foreign delegations mainly inspected the entire CNC machine tool production workshop of Jiuyi Heavy Industry.Accompanied by Wu Zhongda.After visiting the most basic smelting and casting workshop, the old man will directly enter the assembly workshop, and then the highlight is to visit the independent research institute.

Therefore, for the old man's visit to the smelting and foundry workshop where he only introduced the situation, he explained it very hard.You must know that he, the general manager who studies manufacturing rather than materials, is not particularly familiar with smelting and casting.

"Yes, who said that old equipment cannot produce good equipment? Your experience should be promoted throughout the country. Our country is not yet rich. There is a lot of room for improvement in terms of energy saving and production efficiency. These old equipment, since can be used

, why do we have to replace those new equipment that can not greatly improve the production efficiency and quality? "The old man was seldom relieved when he heard that Wu Zhongda introduced that the various furnaces in the smelting workshop of Jiuyi Heavy Industry were remodeled old equipment and second-hand equipment brought back from the Soviet Union.

Yunfei is a young man who knows how to live a life!

To do business, we must give full play to the subjective initiative of people and strive to improve our own technical level. Everything depends on buying new equipment, which will not improve quickly, and at the same time, we cannot have a great accumulation and improvement in technical level.

Up to now, most of the small amount of foreign investment in China has been cheated away by foreign equipment manufacturers!

This made the old man very sad.

"Boy Yun, not bad, very good." After the old man finished speaking, he praised Yun Fei with a smile on his face.

For this young man whom he was very optimistic about from the very beginning, the old man did not hesitate to praise him.

"Mr. Deng, you are too much of an award. I was also forced to do this. If it weren't for the fact that there are thousands of people in the company to support, I would also like to buy new equipment! Do it yourself, after all, it's too much trouble!" For this, Yunfei is still very proudly.

Of course, these old equipment can be transformed into what they are now, but it is all thanks to the blessing that he stayed in that state-owned factory for so many years as a technician.He didn't major in materials, and he didn't know much about these materials-making equipment, but at that time, many of the products they produced were used in the military industry.Therefore, the requirements for the furnace batch number of the material are very high.

Even if it is used on equipment, the operator of all production processes of the product can be traced from the furnace batch number!Therefore, in many cases, the machining workshop must contact the melting and casting workshop of the production materials at any time.Often under the influence of ears and eyes, I am quite familiar with the technical parameters and structure of the high-temperature furnaces used for smelting and heat treatment.

"Mr. Deng, this is our CNC machine tool assembly workshop. Except for the servo motors used for transmission and some electronic and electrical units used for feedback control, most of them are made in China." Yun Fei knew that the old man had great expectations for domestic production. , but the servo motors or stepper motors used by CNC machine tools for transmission cannot be produced in China. In this regard, the elderly cannot be fooled at all. Otherwise, China's number one CNC machine tool manufacturer will not fall into Jiuyi The construction of the heavy industry factory is less than two years old.

years at the head of private enterprise.

"When will all the spare parts be completely self-produced?" Seeing that the entire workshop is full of CNC lathes and CNC milling machines being assembled, the old man was about to praise Yunfei, but he heard Yunfei's words—the core components I can't produce completely independently, and my face suddenly becomes lonely.

If it cannot be completely domestically produced, it is very likely that Jiuyi Heavy Industry will be stuck by foreign parts suppliers when it competes with foreign countries.

It is estimated that this is the reason why the young man in front of him did not expand the production scale of Jiuyi Heavy Industry.

Once Jiuyi Heavy Industry expands its production scale, it will fully compete with foreign machine tool suppliers.Now it is because of the appearance of Jiuyi Heavy Industry's products that foreign CNC milling machines and CNC lathes have carried out large-scale price cuts. If Jiuyi Heavy Industry develops a three-axis machining center, foreign CNC machine tool manufacturers will feel threatened. .

After all, CNC lathes and CNC milling machines are not large-scale imported products in China. Linkage machine tools with more than three axes are the main products of China's CNC machine tools.

"Right now, the research institute is conducting a comprehensive research on core components. If there is no accident, these core components can be completely made in China within three years. Rongcheng Viewpoint Research Institute has now begun to study CNC machine tools for CNC machine tool displacement detection. The grating ruler is estimated to be able to produce samples by the end of this year..."

Three years, at least a conservative estimate.

The research of Jiuyi Heavy Industry's AC servo motor has long been started under the leadership of Situ Heyun. At the same time, Huadu CNC is also researching this aspect, but it has not yet made breakthrough progress.

"That is to say, your CNC machine tool production will have to wait three years before expanding the scale?" The old man sighed.

Because of his concern for Yunfei, he also knows that CNC machine tools are old people in the market.The domestic demand for CNC machine tools is growing every year, but those state-owned machine tool factories are not up to date, always wanting to rely on the introduction of production technology from abroad, while ignoring their own technology accumulation and development.

However, multi-axis linkage CNC machine tools with more than three axes are a kind of strategic equipment in the whole world!

Only Jiuyi Heavy Industry can carry the banner of the national industry of the CNC machine tool industry. (To be continued..)

ps: Thank you Tianhai Xiangyun for your great reward, and thank you for your mother's bad son, Shanggu Jiangjin, Really Boring, Ziyi, and Sadness in the Dark Corner for their big monthly tickets.