Smart Industrial Empire

"This, can't be measured by scale?" Wang Ziqing didn't understand Peng Zhi's words.

CNC machine tools are not other industries. This industry is all about technology and capital.

If measured by the scale of production, it is estimated that in the whole world, there is not much that can compare with the machinery manufacturing factories in the mainland that employ tens of thousands of people.But the fact is that these mainland machine tool factories, in the CNC machine tool manufacturing industry, can't even compare with the most garbage newly established third-rate CNC machine tool manufacturers in Taiwan.

It is impossible for the mainland government not to know about such things.

Or they think that as long as they get the technical information, they can produce CNC machining centers that can compete with them in a short time?

Is this possible?

If this is the case, perhaps these state-owned machine tool factories in the mainland have imitated the CNC machine tools imported from all over the world a few years ago!

CNC machine tools involve a lot of things.

Even their Taiwanese CNC machine tool factories have to import the CNC system used by the CNC machine tools, the servo motors used to transmit the feed, and the DC stepping motors from Japan until now...

"Many officials in mainland China believe that quality can be compensated by quantity..." After Peng Zhi finished speaking lightly, he was about to get up and leave.

"By the way, Mr. Wang, when we make any moves on the mainland market in the future, please inform us first. This time, if the 9327 factory started by Jiuyi Heavy Industry is not taken back by the Ministry of Industry in the mainland, it is estimated that we will report to the mainland market. It is difficult to stand firm. Jiuyi Heavy Industry is now cooperating with Harbin Heavy Industry in Northeast China to produce a large number of large castings used in machining centers..." When he was about to leave, Peng Zhi straightened his face and said to Wang Ziqing.

Thanks to dealing with companies in Europe, America and around the world, these companies in Taiwan have developed a good habit of collecting intelligence on their competitors.

The cooperation between Jiuyi Heavy Industry and Harbin Heavy Industry has not been reported by the mainland media.Anyone with a heart can know this from Harbin Heavy Industry's raw material procurement and logistics.

"Jiuyi Heavy Industry has the strength to produce three-axis machining centers?" During this period of time, he has been busy building his own factory in the mainland, and has not paid much attention to collecting information on these competitors in the mainland.

With the existence of the Taiwan Machine Tool Federation, Taiwan's various machine tool companies share information on the mainland market, and Wanyou Group will also notify them of any competitors' information.

Taiwan's machine tool companies are also in competition, but when they entered the mainland, their main competitors were these machine tool factories in the mainland.When there is no large-scale occupation of the mainland market, the competition among them will not be too fierce.

Otherwise, under the pressure of European, American and Japanese CNC machine tools, it is impossible for these enterprises to establish so many brand enterprises in just over ten years, and survive in the cracks in the European, American and Japanese markets. , and grow stronger.

"It's not just as simple as a three-axis machining center. The young boss of Jiuyi Heavy Industry. He also has a simple fourth-axis production technology in his hands!" They have paid enough attention to Yunfei's Jiuyi Heavy Industry, but they did not expect this establishment However, the small factory has made such progress in technology for more than two years.

At least.At present, CNC machine tool factories in Taiwan have encountered difficulties in the research and development of four-axis machining centers.

Such technology is a key technology of core competitiveness in the whole world.

Most of the CNC machine tool manufacturers in the world only have ordinary CNC machine tools with three axes and below.Machining centers with four or more axes.It is only mastered by some large manufacturing companies in Europe, America and Japan, which are traditional CNC machine tool manufacturing powerhouses.

It is simply impossible to buy in this day and age!

"We just underestimated our most powerful competitor in the mainland!" Wang Ziqing said suddenly annoyed.

If he had known this information from the very beginning, he would never have put a large number of Taiwanese CNC machine tools on the market at low prices before their factories in mainland China were built!This time weeding startled the snake.If Jiuyi Heavy Industry had not been disabled by the mainland government, their development in the mainland would have been really difficult.

"Not only have you underestimated them, but I have also underestimated them. Since the mainland government purchased several four-axis machining centers from Germany in [-], it has not been as urgent as before. You know, with the number of troops in the mainland and the number of people it needs In terms of equipment, there are not hundreds or thousands of four-axis and above machining centers, which is not enough at all. And they are now looking for five-axis machining centers..." These information are from Wanyou Group in Taiwan during this period. The staff on the side got the news from the Taiwan government.

Since the reform and opening up in the mainland in the late 70s, many Taiwanese companies that have been greatly affected by the Japanese financial crisis have discovered the huge opportunities in the mainland, rushing into the mainland market, and using their huge financial strength to open various The factories, taking advantage of the mainland's rich and cheap labor costs and abundant resources, have once again risen among the four Asian tigers that have declined.

The mainland's economic development in recent years has attracted the most capital from Xiangjiang, which is still under the rule of the Queen of England, and Taiwan, which has been clamoring for the establishment of the country.

In the earliest years of reform and opening up, it was easiest for the mainland to approve foreign capital, that is, capital that belongs to the same ancestor as the mainland.

As the capital of Taiwan and Xiangjiang became weak, the mainland began to increase its efforts to absorb capital from all over the world and use these foreign capital to stimulate its own economic development.And take this as an opportunity to carry out a large number of domestic infrastructure construction.

"Five-axis machining centers, there should be no country that will sell them to the mainland now? Although the Toshiba incident has passed for many years, Europe and the United States have not relaxed their scrutiny in this regard. Mr. Peng, in such a situation, what should we do next? How to deal with it?" Wang Ziqing really didn't expect to encounter such a situation when he first entered the mainland market. If he had known about it, he should have entered the mainland market earlier.

"How to deal with it? We can only wait! Now I've done my best, and the rest of the time is up to fate!" Peng Zhi said coldly.

Before entering the mainland market, these companies have already established an alliance to collectively deal with the accidents in the Chinese market.

But now that the factory has not officially started production, it has caused a rebound from Jiuyi Heavy Industry. If the young boss of Jiuyi Heavy Industry cooperates with those large state-owned machine tool factories, they will be in danger.

Although they set up factories here for the mainland China market, they advertised China's own CNC machine tools.But compared with Jiuyi Heavy Industry, a local company that was born and bred, it has no advantage at all.

We can only use the thinking of some mainland officials who feel that the moon abroad is rounder than China to find a breakthrough.

Wu Chengfeng fooled around with that Xiangjiang woman every day, and he didn't pay much attention to his Chinese competitors at all, and he would cry when the time came!

"I have to go back to Taiwan during this time. Your own factory had better speed up the progress a little bit, and it's better to keep pushing the products to the market at the same time as our Wanyou Group in March..." Peng Zhi looked outside It was getting late, so I got up and prepared to leave.

Taiwanese CNC machine tool companies build some assembly plants in the mainland. The largest Wanyou factory here is only designed to have a production capacity of [-] units per year. At present, it seems that it cannot meet the rapidly increasing demand in China. market.

He was very worried that the young boss of Jiuyi Heavy Industry would engage in a price war with them. This would be a disaster for companies like them with huge debts!

"Are you planning to go back to Taiwan?" Wang Ziqing never expected that Peng Zhi would choose to leave the mainland and return to Taiwan at this moment.

Did he go back to avoid suspicion or go back to prepare for the changes in the mainland market?

"Yes, the air ticket for the morning of the day after tomorrow." After Peng Zhi finished speaking, he left the private room of the teahouse without looking back.

Shuzi lacks and seeks!

Peng Zhizhen didn't know where Wang Ziqing's shrewdness in the Taiwan market had gone.

Jiuyi Heavy Industry's CNC lathes have gained a large market share in the Chinese mainland market in a short period of time. Wang Ziqing actually gave up his own advantages and wanted to compete with Jiuyi Heavy Industry CNC lathes in the Chinese mainland market!

You must know that Taiyu's CNC lathes can only be regarded as the technical level between low-end CNC lathes and mid-range CNC lathes in the mainland market.If it is imported, it still has the advantage of importing, but once it is produced in China, it is not enough at all.

At least, their production costs cannot be compared with companies like Jiuyi Heavy Industry.They don't know the production cost of Jiuyi Heavy Industry, but they can know from Xinkaixing, which is also an industry under Yunfei, that the production cost of these factories is not higher than that of Taiwanese companies.

Lower production costs and higher technology means more market profits.

If Jiuyi Heavy Industry cannot be defeated in the machining center, once Jiuyi Heavy Industry develops, they Taiwanese companies that purchase production technology from some third-rate CNC machine tool factories in Japan or Italy, in the mainland market, can only be used in large-scale CNC machine tools in Europe, America and Japan. Machine tools and the newly emerging Jiuyi Heavy Industry, a local Chinese company, seek to survive.

In China's CNC machine tool market, the low-end market has a large number of state-owned machine tool factories with terrifying production capacity. The most profitable ones include Jiuyi Heavy Industry, which produces mid-range CNC machine tools, and machine tools exported to China from Europe, America and Japan. As for the most profitable high-end CNC machine tools, in In mainland China, basically only a few powerful companies have a small amount of exports.

These Taiwanese machine tool factories are very reluctant to produce mid-range CNC machine tools... (to be continued...)

ps: Thank you Transformers for being my big monthly ticket.

Today's third one is offered.