Smart Industrial Empire

At the time of the national order, the military only gave Jiuyi Heavy Industry an order for dozens of four-axis machining centers symbolically. Yunfei wanted to get more orders in the future, and at the same time improve the accuracy of the entire Jiuyi Heavy Industry four-axis machining center. Grade, the standard reported to the military is that these four-axis machining centers all contain automatic detection devices!

Now Jiuyi Heavy Industry has gradually matured the four-axis machining center, and the production plan has been scheduled. Some key parts with a long construction period have been roughly machined, and many have even begun to age naturally...

In mass production, natural aging is very serious for the capital backlog of the enterprise.

Even a company as rich and powerful as Jiuyi Heavy Industry would not dare to play like this.

The more precise the parts, the longer the natural aging time.

However, in order to eliminate as much processing stress as possible in the parts due to the processing process, multiple heat treatments must be performed.

In order to improve the precision and service life of parts and reduce production costs, Jiuyi Heavy Industry not only adopts multiple heat treatments, but also performs semi-natural aging on these parts under artificial conditions.This is the aging method used by Jiuyi Heavy Industry to produce the guide rails of inclined bed CNC lathes and other key components of precision CNC equipment.

"Xiaoyun, if they can't complete the research over there, shall we give in and accept their technology, or..." Regarding the situation there, Sun Lin, who is mainly in charge of the four-axis machining center project, is still clear about the situation.

The machining accuracy level of their four-axis machining center is also 0.005mm, and the detection technology is also of such accuracy.Already matched.

Yunfei shook his head: "Mr. Sun, we can give in to other things, but we can't do it in the detection. We have paid a lot of money just for this technology. If the detection accuracy can't be higher than our production Precision, the production precision of our products is difficult to improve. Once we make concessions now, we don’t know how many concessions we will make in the future!”

In terms of technical research, it can't be almost enough.

I'm almost done.Others will be more or less the same.At that time, Jiuyi Group will be fully surpassed by those domestic counterparts who are catching up.

Such things are what Yunfei doesn't want to see.

"The technology of our electric spindle is still immature, so we should not use it for the time being? At that time, we gave them the parameter of a maximum speed of 12000 revolutions per minute. Now our spindle can fully achieve it. There is no need to go to 18000 revolutions per minute. Rotational speed..." Yunfei wanted to provide the military with higher-performance CNC equipment.Although Sun Lin agrees very much, but now his technology is obviously immature, if he does this.On the contrary, it will affect the reputation of the entire company.

The military has always been the most important customer of Jiuyi Group.

They attach more importance to the military than they do to domestic private enterprises.

"The technology of the electric spindle is immature, so don't use it on it. Mr. Sun, Jiuyi Heavy Industry is under a lot of pressure now. If we can't establish the reputation of our four-axis machining center in a short time, wait until those foreign CNC equipment factories After exporting five-axis machining centers to China, our pressure will be even greater. Since we can’t compete with them with five-axis machining centers in a short period of time, at least we will occupy the vast market of four-axis machining centers share, otherwise we will lose all of the high-end market..."

Once the five-axis machining center enters China, China's CNC equipment will be lowered again.Even if the precision level produced by Jiuyi Heavy Industry is high-end in China at present, it will definitely drop to the mid-range.

The four-axis machining centers they produce can be ranked at the lowest end of high-end equipment.

"Situ predicted with me that it is very likely that Japanese companies will appear five-axis machining centers at our domestic international machine tool exhibition this year. Japan has been seeking to export to China, but it has not been approved by the government..."

The senior management of the entire Jiuyi Group has such concerns.

The production technology of China's CNC equipment is developing too fast, and the last thing I want to see is Japan.

Just like at the beginning, as soon as Jiuyi Heavy Industry developed a two-axis two-axis CNC car with independent intellectual property rights, Japan began to export low-end CNC car manufacturing technology to China on a large scale; when Jiuyi Heavy Industry developed a three-axis two-axis After the linkage of CNC milling, they began to export machining centers and CNC milling production technology to China on a large scale.

Jiuyi Heavy Industry has the production technology of four-axis machining centers, and Japan is the most fearful.

Because of the geographical relationship, China is their biggest market.

Before Huadu CNC, a CNC system manufacturer, appeared, Japan's Funac, Mitsubishi and other systems occupied 70.00% of the Chinese CNC system market!After the appearance of Huashu, the Japanese numerical control system shrank rapidly to less than 40.00%, while those in Europe and the United States shrank to less than 20.00%.With the rise of a large number of Chinese CNC equipment manufacturers in the past two years, Huashu's market share has further increased.

The loss of the CNC system does not make the Japanese feel distressed.

Even if the Chinese have a numerical control system, they cannot produce high-precision numerical control equipment.

The profit of the CNC system is far less than that of the CNC equipment.Especially in the middle and high-end CNC equipment.The production cost of a four-axis machining center is only a few hundred thousand, but in China, at least 300 million can be bought!

Five-axis margins are even more outrageous.

The Chinese people's numerical control system is not good, the mechatronics technology is not good, the automatic control is not good, and even the most basic electronic and mechanical technology is not good!

But now with the rise of Jiuyi Heavy Industry, the Japanese don't think so.

They must fully prevent the rise of Jiuyi Heavy Industry, otherwise, once Jiuyi Heavy Industry masters the production technology of five-axis machining centers, they will completely lose the Chinese market.

The profits of the low-end market are too thin, and they voluntarily give up; the profits of the mid-range market are not low, but with Jiuyi Heavy Industry, a Chinese national enterprise that has a very good relationship with the government, and Jiuyi Heavy Industry has also spread its production technology to many manufacturing enterprises across the country, The processing centers made by the Chinese are constantly squeezing their market share...

The main profits of Japanese CNC equipment manufacturers in mainland China now come from the export of high-precision three-axis machining centers and four-axis machining centers to China. Now that Jiuyi Heavy Industry has manufacturing technology, the Chinese government will definitely support national enterprises. I will support Jiuyi Heavy Industry without hesitation, even if the precision of the equipment produced by Jiuyi Heavy Industry cannot be compared with them.

In order to prevent Jiuyi Heavy Industry from rapidly approaching the five-axis technology, it is necessary to steal orders from China.

"Yes, it is very likely that not only Japan, but also European and American manufacturers will bring out some of their low-precision five-axis machining centers to China to participate in the exhibition, and let go of the blockade of the Chinese market. The country is willing to see that China has its own five-axis production capacity..." Yun Fei sighed.

"Shouldn't be so fast? The Germans quietly bought four-axis from us, and it has been several years since they were fully released! Moreover, their ultra-precision equipment is still embargoed on us, so take their four-axis As for the axis CNC machine tool, our Jiuyi material has been discussed for so many years, isn't Dirke company also willing to sell it to us?" Sun Lin was a little surprised.

What they speculated was that the Japanese would export a small amount of five-axis to China, but they did not expect that Yunfei's guess would be so bold.

"No one can tell what didn't happen. After all, at the exhibition in [-], the Machinery Department announced that we would start delivering four-axis machining centers to the military in [-]...no matter what they do, we We must stick to our own development direction and our research investment, otherwise, we can only look up to leaders like us to survive like the Northeast One Machine and the Capital One Machine..."

The slow-moving wire-cutting project hosted by Deng Lanqing, without the support of the West Lake Electrical Processing and Performance Institute, could only be explored by himself, and no breakthrough has been made, and the fully automatic flexible manufacturing system is only a semi-finished product.

The entire Jiuyi Research Institute is only one step away, and it is only one step away from being able to soar into the sky.

But no one can tell how difficult this step is and how long it will take.

A breakthrough in technological research cannot be rushed.

Anxious, there is no effect.

"Mr. Myron, how are we doing with the purchase of Decker's four-axis tool grinder?" It should be much easier to restrict the export of four-axis and four-linkage CNC grinding machines to China in the Namibia Agreement, but he was wrong.

"Boss, I can't do anything about this matter. The top executives of the Decker Company tend to export to us, but our government disagrees, and the Japanese in the Vasenaar Supervisory Committee are keeping a close eye on this, so..." When Myron heard Yun Fei ask this, he couldn't help but shrugged and smiled wryly.

After arriving in China, he helped the Jiuyi Research Institute order a lot of research instruments from Germany, and even many of them were the instruments that were clearly stipulated in the Wassenaar Agreement to be embargoed on China. For this reason, he was even warned by the German government .

If he hadn't owned [-]% of Jiuyi Group's shares, he wouldn't have been able to get out so easily.

Foreigners don't even know that the Jiuyi Research Institute does not belong to the Jiuyi Group...

They cannot understand many things in China.

"It's okay, I'm just asking. After all, the production efficiency of our manual tool grinder is too low..." Yunfei knew that the old man Myron had paid for the entire group company, and the equipment used by the entire Jiuyi Material Factory for technological upgrades was all The old man Myron brought his consultant team to China from Germany, and even included embargoed equipment such as three-axis CNC grinding machines.

Therefore, after Wheat Mobile was merged into the Jiuyi Group, he did not reduce the old man Myron's shares. (To be continued..)