Smart Industrial Empire

"How are you, dumbfounded?" Huang Qiaosong asked Yun Fei.

Huang Qiaosong was very satisfied with Yun Fei's expression.

People who don't know the existence of this workshop almost always have such expressions when they enter the workshop for the first time.

"Fuck, I'm really dumbfounded. It's far from what I imagined..." Yun Fei wanted to spit on the ground, but he held back when he saw the spotless and clean ground.

Is this still a machine shop?

There is no oil stain on the ground, and the white paint on the equipment is actually the same as when it was new!

Is it well maintained, or is it the climate relationship of the underground constant temperature workshop?

"In this workshop, the temperature has always been controlled between 18 degrees and 21 degrees, and the air humidity has basically remained the same..." Huang Qiaosong walked Yun Fei to the area of ​​the four-axis machining center that had just moved in, and said to Yun Fei. Non-introduction of the situation inside.

"Automatically controlled?" Does China have such technology?

"Yes, it was only in [-] that the temperature and humidity were automatically controlled. If the humidity is too high, some parts will be easily oxidized. If the humidity is too low, the dust will not be easy to control..."

"Shouldn't you use this to research some electronic equipment? Why did you put machining in it? Isn't this a pain in the ass?" Such an advanced workshop is most suitable for electronic research.

Used to study mechanical parts?

It's really a bit of nonsense.

a waste of resource!

"Stop talking nonsense, let's take a look at your equipment. Now we are processing the turbine disk of our experimental engine. Your precision has just barely reached..." The four-axis machining center delivered by Jiuyi Heavy Industry to Factory 132 has three sets. In this underground space, other things.It's all on top.

Originally, Huang Qiaosong was unwilling to bring Yunfei to this workshop, but he couldn't bear Yunfei's begging not to cooperate with Factory 132 in the future, nor to secretly provide research funds for the fourth-generation fighter research project of Factory 132. Not to mention the threat of allowing some electronic projects of Factory 132 to be put into Jiuyi Research Institute for research and so on, so they could only reluctantly agree.

"Master, are these four-axis machining centers stable?" A worker in a white coat and hat turned his back to Yunfei and was modeling on a computer with the Chinese-made CAXA [-]D modeling software.Yun Fei stood aside and asked softly.

There are two types of four-axis machining centers produced by Jiuyi Heavy Industry. One is that the fourth axis rotates based on the z-axis, that is, the horizontal xyzc four-axis machining center that the worktable rotates; the other is that the z-axis swings left and right or back and forth XYZA(b) vertical four-axis machining center.

Three processing centers in the underground space of Factory 132.There are two vertical machining centers where the main shaft swings, and one is a bedroom machining center where the worktable rotates.

These two types of machining centers are the most common and typical four-axis machining centers in the entire CNC industry.certainly.The pseudo four-axis machining center with a simple rotary table on the worktable.It cannot be counted.

Otherwise, when Jiuyi Heavy Industry developed the three-axis machining center technology, it would have four-axis production capacity.

"The rotary positioning accuracy of the horizontal one is a bit poor, and the positioning of the swing angle is also a bit poor for the two vertical ones. It doesn't matter much. This accuracy is enough for the production of our products, but the rigidity of this equipment is too poor. The processing efficiency is too low..." The master who was doing the modeling didn't turn his head.

Yun Fei could hear his contempt for their equipment from his words, and he could only smile wryly in his heart.

This is impossible.

such equipment.They themselves are afraid to conduct the same heavy load test as those three-axis machining centers.

The equipment produced by oneself is well known.

"Except for the poor rigidity, are there any other problems? There is no program running around during the machining process, or any nonsense such as tool dropping during the tool change?" Yun Fei asked, smiling at Huang Qiaosong, until Huang Qiaosong turned his head away. to the side.

"Except for poor machining accuracy and rigidity, the problems you mentioned have never occurred before. Why are you asking these questions?" The worker finally turned his head to look at Yun Fei.

"Old Zhao!" Yun Fei was stunned when he saw the thin face of the worker who turned his head was full of beards, but his small eyes were shining brightly!

Nima, this guy is actually the master of the machining center in the world before him, the first CNC technician in China to contact the four-axis machining center!

Yun Fei was in a mess.

Zhao Jinshan is not supposed to be a member of the aerospace system, so why did he come to the aviation system?He also went to the Dongfeng Machinery Factory of Aerospace to look for it, but was told that there was no such person at all!

"Boy Yun, what's the matter?" Huang Qiaosong was thinking about how to deal with Yun Fei's accusation of the reason he made up in order to pay less than 20 yuan per unit, but found that Yun Fei seemed to be broken.

"Young man, who is your name?" The thin middle-aged man looked at Yun Fei in surprise.

"Your name is not Zhao Jinshan?" Yun Fei took a deep breath, God's joke was too big.

I almost forgot all the things in the previous world, and let the first master who made me realize the numerical control equipment appear in front of my eyes.

"Hehe, young man, how can I be called Zhao Jinshan! My name is Luo Feng! I'm not called Zhao Jinshan, and I don't have any twin brothers living outside..." Luo Feng said to Yun Fei with a smile.

Nima!

God, you are playing with me!

How could this guy not be Old Zhao? He had the same expression when he smiled, even the black teeth formed by smoking too much!

It's not Zhao Jinshan!

Not my master!

Now Yunfei really wants to run to an open place outside, pointing at the sun in the sky and shouting: "Sun!"

"What's wrong? Boy Yun, are you surprised?" Huang Qiaosong and Luo Feng were both very surprised by Yun Fei's behavior.

"It's okay, it's okay, I'm distracted. Master Luo is very similar to a friend of mine. He's in Huadu. Just now, Master Luo turned his head around, and I thought it was my friend..." Yun Fei, who came back to his senses, was embarrassed smiled.

So what if it's Old Zhao?

Could it be that he told him that he was his apprentice a few years later, traveling through time and space for 20 years?

Huang Qiaosong probably sent him to Rongcheng Fourth People's Hospital, which specializes in treating mental patients!

"It's good that it's okay, don't you want the operating data of these devices? Xiao Luo, have you memorized all the data you asked me to write down?" Huang Qiaosong wished that Yun Fei would keep his mind distracted, so that this kid would not think of the fact that he cheated him of 100 million.

Although I haven't got it right yet.

"Remember, leader, who is this?" Luo Feng wondered why Huang Qiaosong would bring such a young person into the secret workshop.

For the sake of confidentiality, the operators of these newly added four-axis machining centers have not been equipped yet!

"The boss of the Jiuyi Group, if you have any requirements for the equipment, you can ask him. He will go back so that the technicians in their research department can improve it!" Huang Qiaosong likes to find help for Yunfei to make him forget what Luo Feng said just now .

After seeing Luo Feng's face, Yun Fei started to feel dizzy. Now he is a bit unclear whether what he remembers is the reality or what he meets now is the reality.

This is the first person he met who was familiar with that world.

Except that people look exactly the same, their names are different, and their workplaces are also different.

However, why do you have to let someone who looks exactly like the master who led you to contact the machining center appear in front of your eyes?Moreover, this Luo Feng should also be one of the first ten people who received training after the German ep6 entered China?

"Old Huang, can you give me that Luo Feng?" After coming out of the underground workshop, Yun Fei said to Huang Qiaosong.

He was still in a daze, and he didn't even know what he was talking about!

"Are you crazy? Kid, don't you still need a technician at Jiuyi Heavy Industry?" This kid's brain is twitching?

He actually asked himself for a CNC technician?Or is it someone who just met once and didn't even say a few words?

Isn't this smoking?

"Whatever the conditions, you can do whatever you want!" Yun Fei directly asked Huang Qiao to let go of the conditions, and he still didn't want to give up.

Doesn't this kid look like he's joking?

Huang Qiaosong had never seen Yun Fei look so serious before, so he couldn't help being curious, what's wrong with Yun Fei?

"Boy, it's not a problem to give him to you. Hundreds of fitters can give it to you, but you have to tell me why you want him? At least, you have to give me a reason?" Huang Qiaosong asked curiously.

"He can use a three-axis machining center to do five-axis work, he can use an 850 machining center with a stroke of only [-] millimeters to make a [-]-meter airplane wing, and he can program [-]D programming software by himself..." Yun Fei was out of control Said these words.

In a daze, he felt a voice telling him that this person should take him to the Jiuyi Research Institute.

Why and what to do, Yunfei doesn't know.

"Oh, he has such abilities?" Huang Qiaosong frowned.

Isn't this kid fooling himself?

Such an important technician has such a skill, but he doesn't know it?

"Perhaps!" Yun Fei finally came to his senses, "Just say whether you will give it or not. If you do, I will pay you 100 for the 132 million you don't want to give!"

Since God's will is so, then obey God's will!

"You're not joking?" Huang Qiaosong didn't feel Yun Fei's joking mentality at all.

This kid is really convulsed.

100 million, just buy a technician for a machining center!

It's not a convulsion, what is it?

"I seem to be joking? After passing this village, there will be no such store. If I go back on my word, even if you give me the person, I will not be exempted from the 132 million that your 100 factory owes!" Yun Fei told seriously Huang Qiaosong, he wasn't joking.

"Here, I'll call him right away to report, and you will take him away today..." (To be continued...)

ps: Thank you 6675 for your big monthly pass.