Smart Industrial Empire

"Jiuyi Heavy Industry's large-scale acquisition of China's bankrupt state-owned machinery factory should have only one purpose - to expand their production capacity!" Peng Zhiyu said surprisingly.

Not only him, but all competitors are analyzing Jiuyi Heavy Industry's big moves some time ago.

Almost all of the enterprises acquired by the Jiuyi Group are machinery-related enterprises - foundries, forging machine tool factories, heat treatment factories, the largest number of them are indeed machinery processing factories!Just for the foundry, Jiuyi Heavy Industry acquired the long-abandoned Jinling Foundry and Northeast Shanyuan Foundry.

Most of Jiuyi Heavy Industry's large castings are provided by Harbin Heavy Industry and Capital No. [-] Machinery.Now they have acquired the production scale of these two foundries is not small.

Moreover, it has not been heard that iJiuyi Heavy Industry will terminate the foundry contract of large castings and rough machining with Harbin Heavy Industry and Capital No. [-] Machinery.This shows that the production scale of Jiuyi Heavy Industry will be at least doubled.

In this way, the production scale of their machining centers will reach a terrifying scale of [-] units a year!And two-axis simple CNC lathes (mainly economical CNC lathes with low machining accuracy) will exceed [-] units!

This is the conclusion drawn by Peng Zhi's analysis. ,

He didn't believe that the young boss of Jiuyi Heavy Industry would be free to buy these factories for fun.This is obviously an acquisition supported by the mainland government. Otherwise, Jiuyi Group would not be able to spend so much acquisition funds.

When several other companies established the federation, his Wanyou refused to participate. After all, if they entered it, they would not be able to occupy a dominant position. Instead, they would be used as cannon fodder by the Japanese.

"I have already reported the current situation to the company's headquarters. No matter how the companies in the United States and Europe react, I believe our domestic counterparts will make big moves. The development momentum of the Jiuyi Group must be curbed..." Big Nomura Saburo gritted his teeth and said.

"Mr. Ohno, I don't know what specific actions you will take? You invited us today, are you just announcing your determination?" Li Mingshan was not polite to Ohno.

The technology of slow wire walking is not yet mature in South Korea.The start of Samsung Group in this respect is similar to that of Jiuyi Heavy Industry, but Jiuyi Heavy Industry has gone ahead of Samsung.

"I don't know how the domestic industry associations will react, but at present we have to respond! For us Mitsubishi, it does not have much impact on the four-axis machining center. We only have a small amount export, and now we are trying our best to develop the five-axis machining center market in China..." Saburo Ohnomura looked at everyone with a nonchalant look.

"Oh Ye-kun, please don't go. The three-axis machining center that Mitsubishi exports to China is your most important business!" Song Hui frowned.

What exactly do the Japanese want to do?

Could it be that he instigated himself and others to lower the price again?Not long ago, in response to Jiuyi Heavy Industry's price cut.They have all been forced to make a substantial price cut, if they drop again.How much do you have to drop to be tall?

"The three-axis machining centers we export to China. The machining accuracy is much higher than that of Jiuyi Heavy Industry. Why do they compete with us?" Saburo Onomura has little grasp of the price fluctuation range for the Chinese business.

If possible, he would definitely lower the price significantly, and even lower the price of Mitsubishi and Jiuyi Heavy Industry's products of the same type to the same level.

Only by curbing the development trend of Jiuyi Heavy Industry in the market can they stop their investment in technology development.

"I will apply to the company. Sell the production technology of the four-axis machining center to you. At the same time, I will also recommend to the company's board of directors and the Wassena Association. Let them release the restrictions on the Chinese market of the low-precision five-axis machining center... ..." This is no longer a solution.

Saburo Ohnomura has reason to believe that in recent days, those giants in the world will definitely have countermeasures.

It is impossible for them to let Jiuyi Heavy Industry continue to develop without restriction.

At present, to limit the technological development of Jiuyi Heavy Industry, we can only make a fuss about the most fundamental economics.At present, the boss of Jiuyi Heavy Industry is investing everywhere, and the bank loan exceeds 20 billion, a large part of which is mortgaged by Jiuyi Heavy Industry.

Once the market of Jiuyi Heavy Industry is eroded, and the technological investment cannot keep up, the market will shrink further. If other investments of Jiuyi Heavy Industry cannot be recovered in a short time, Jiuyi Heavy Industry, whose capital chain is broken, will be sold by China's state-owned giant. Company takeover, no road to go!

"Mr. Ohno, I wonder if it is possible for us to obtain the production technology of the five-axis machining center?" Song Hui asked the aspirations of everyone present.

With five-axis production technology, four-axis technology also exists.

The market for four-axis machining centers is far less extensive than the market for five-axis machining centers.Everyone present, everyone understands.

It is impossible to obtain the production technology of heavy-duty five-axis machining centers that can process large warship propellers, but no one is willing to give up the production technology of small woodworking machines.

With these technologies, it is not only possible to produce five-axis machining centers, many of the above technologies, as long as they have a thorough understanding, will greatly improve the company's mechanical processing technology level, mechanical design and many other general-purpose mechanical technologies.

"This is unlikely, but you can learn from Mr. Peng. Are they negotiating with Italy? The whole of Europe, not only Italy, but also Spain, Portugal, the Netherlands and many other countries have five-axis machining centers. Competent companies are in a recession right now..." Saburo Ohnomura said to the crowd.

What he meant was to tell everyone that it was impossible for Mitsubishi to sell the production technology of the five-axis machining center.

Similarly, his words also left a lot of hope for everyone. If you want to obtain this technology, many poorly run factories in Europe are good choices.

"Forget it, Zhongsen still only makes three-axis machining centers and two-axis CNC lathes!" If you don't have a huge technical strength, even if you get the production technology, you can't form it in a short time. production capacity.

Moreover, the technology of those companies that can be acquired is unlikely to be very good. For these companies without that technology, it is difficult to digest the technology after obtaining it, let alone improve the level of precision in technology.

This requires a lot of capital as a backing.

The meeting lasted until early in the morning, and what kind of agreement was finally reached, except for the parties, few people knew.

As for Jiang Jianxing and others, although they went to bed very late the night before, they still woke up very early the next day.

Today will be the day when Jiuyi Heavy Industry will start to harvest.

Over the years, a lot of manpower and material resources have been invested in these equipments, just for today's harvest.

Moreover, what makes people happy is that the heavy-duty CNC equipment developed by Jiuyi Heavy Industry does not even have a market competitor.

"Mr. Jiang, if those foreign guys want to purchase our heavy equipment today, we..." Wu Zhongda is most worried about this.

Whether the country will prohibit the export of some sensitive equipment has not been clearly documented and regulated.And these devices are not critical military equipment.

At most, it can only be regarded as key equipment for processing key military equipment!These equipment, military use and civilian use, are not easy to define.

"Don't worry about this. I called Yunfei last night and he will handle these issues by himself. I don't think it is very likely that the state will restrict our exports in this regard!" Jiang Jianxing's words reassured Wu Zhongda a lot.

What Wu Zhongda is most worried about now is that the state restricts their exports in this area.

Yunfei continued to expand the production scale of the entire Jiuyi Heavy Industry, which put a lot of pressure on sales.

Of course, after these capacity expansions, the benefits can also be seen.If it is produced at full capacity, the output value of Jiuyi Group's CNC equipment will exceed 100 billion!

Last year, the output value of Jiuyi Heavy Industry was only 28 billion. This year, it is estimated to exceed 35 billion!The equipment of Jiuyi Heavy Industry has a market share of more than [-]% of the same type in the entire Chinese market.As for heavy-duty CNC equipment, it has almost a [-]% market share.

Of course, this [-]% market share is not very big.

Before expanding the production scale, Jiuyi Heavy Industry's biggest problem was insufficient production capacity, but after expanding the production scale this time, it faced the problem of sales channels.

The competition in the Chinese market is becoming more and more fierce.

If Jiuyi Heavy Industry wants to achieve greater development, in addition to continuously exploring the Chinese market, it has no choice but to go out.

The international situation in North Korea, Iraq, Iran, and Pakistan is not optimistic. In order to protect themselves, they can only continue to develop military industries.

For them, after they have manufacturing technology, buying some more advanced weapons is far less cost-effective than producing them themselves.

Moreover, in the past few years, they have obtained a lot of conventional military technology in China.

Especially in Iraq, Yun Fei told them that the officials who came to visit Jiuyi Heavy Industry said that the United States would take action against Iraq in the next few years. First, it would directly use aerial bombing as it did in the Gulf War, and then carry out ground operations. advance of troops.

Since the Iran-Iraq War, the situation of Iraq and Iran has not been very good. Both countries have been subject to economic sanctions by the United Nations headed by the United States. Now that the former Soviet Union has collapsed, it is very difficult to develop armaments.

It just so happens that the international community is preparing to implement the oil-for-food plan for Iraq, which makes it possible for Iraq to purchase CNC equipment from China—they are planning to build an oil equipment production plant!

If the Chinese government prohibits the export of these heavy equipment of Jiuyi Heavy Industry, the international market development of Jiuyi Heavy Industry will be greatly hindered. (To be continued..)