weapons expert

When the lion said this, Xu Ziling felt suddenly enlightened, and found that he only remembered to keep it secret, which completely led his thinking into a misunderstanding.

There are so many people in the laboratory, and the parts are separated by others. Who would know what he ordered?Anyway, in his capacity, no one questioned what he wanted to say.

"Besides, it's just that someone noticed it. At worst, I'll make a plan and throw out a semi-intelligent program."

The lion was afraid that Xu Ziling would not understand, so he added another fire.

"@#￥#" Hearing his words again, Xu Ziling was powerless to vomit. He secretly hated why this guy didn't say anything earlier, making him worry for nothing for a long time, but he thought that he was confused, so he didn't have the nerve to come say him.

When he returned to the military factory, he first sorted out all the materials he needed, looked at them, and found that most of them were materials already in the laboratory, and there were only a few that were not available. I gave a few people in the material department to synthesize them as soon as possible, and I went to the warehouse to have a look at the existing ones. When I saw that there was enough for him, I greeted the warehouse staff and said that I would use it when the time came. For other uses, hurry up and get some out for backup.

He used to often ask people to make some small things. Seeing him ask for some materials, everyone didn't think it was abnormal. After receiving it, he said that he would make it out as soon as possible.

With the help of manpower, he didn't have to do it himself. In the next few days, in addition to going to each project department below for a routine inspection, he stayed in his own laboratory to work on hydraulic devices, battery-driven parts, etc. , After three days like this, the people below came to report that the materials had been prepared.

When the lion came up with a plan, it considered reducing the body as much as possible to save the driving force, and considering the mechanics, it should not be too light, so as not to "lose the center of gravity and fall with the wind". Therefore, the entire robot weighs [-] kilograms. Due to the material It was raw materials, and Xu Ziling could only get the people below to get it out based on rough calculations, so the pile of unprocessed materials was more than half a ton.

In particular, a large part of it is light metal, and it is really not a small pile when piled up together.

"So many materials are used to make a robot? How big is that?" Li Cheng, Xu Ziling completely gave him a vacation to prepare for his marriage. Only Yang Kaiming was left by his side. He knew that Xu Ziling was making a robot Robot, Yang Kaiming these days, except for occasionally visiting Lu Feng and Gu Hongyuan, or making a phone call with Li Jian, the rest of the time is spent with Xu Ziling. When he sees a pile of materials like a hill, he really Curious about how big a "humanoid robot" Xu Ziling will make.

"You're stupid, don't waste it, it's just raw materials, it looks like it must be a lot, and the parts will be smaller when you get them out." Xu Ziling laughed at him, and then shouted at him, "Help me get it to the factory area. "

In fact, as soon as Yang Kaiming's words came out, he realized his mistake, smiled embarrassingly, and didn't answer, he quickly got a forklift, and together, the two of them transported the pile of materials to the factory area.

A large part of all the parts are small things such as gears that require high precision. Xu Ziling brought a pile of numbered materials and drawings of all the parts to the workshop of the factory area, and handed over a bunch of gadgets to the workshop When the person in charge came to the office, the person in charge was dumbfounded.

A pile of materials, a pile of thick drawings, judging from this posture, they are asked to process this thing on a lathe. Logically speaking, there should be a production line for so many parts.

However, he would not be so stupid as to keep asking about the things Xu Ziling explained. He was sure that he wanted them to process these things, so he picked up a few drawings and looked at them. He is a manager, although he is also familiar with technology to a certain extent. After all, I am not a professional. After looking at a few photos, I found that some small parts in it had unusually high requirements. I was a little hesitant to get them out, so I had to immediately call a senior engineer in charge of machine tools:

"Mr. Zheng, take a look. These are the things Mr. Xu wants. Do you think you can get them out?"

Zheng Gong is a middle-aged man who is almost 50 years old. His hair at the temples is a little gray, and he wears a pair of glasses with thick lenses. It's really not like a technical engineer, but like the kind of person who is trapped in an ivory tower as a scholar.

Xu Ziling and Yang Kaiming wandered around the factory when they were free. Of course, Zheng Gong knew them too. Looking at the oil stains on his hands that had not been wiped off, he didn't reach out, and nodded to them as a greeting, and then I took the drawing and looked at it.

"This seems to be a mechanical arm? No, it seems to be a bit small, more like a robot." Unexpectedly, after seeing a few blueprints, Mr. Zheng didn't say whether he could do it or not, but said something to himself .

Xu Ziling's eyes lit up. He had only read a few blueprints after looking at Zheng Gong. The whole robot had thousands of small parts besides the skeleton. He really didn't expect him to understand that it was for what to do.

"What? Mr. Zheng, have you done this before?" Xu Ziling asked with a little joy and doubt.

As soon as Zheng Gong’s words came out, he regretted it. Looking at the things on the drawings, he knew that this was something like a high-precision automatic robotic arm. This kind of thing is very rare in China. He has worked for decades. I've seen something like this once, but that time it was far inferior to this one in terms of accuracy. I was surprised, so I blurted it out, but as soon as the words came out, he felt that what he said was inappropriate. This is a military factory. , even a screw is confidential, if there is no description of what it is on the drawing, then it proves that it is confidential, and it is enough to know it in your heart, how can you not control your mouth to say it?

Compared with his uneasy mood, the person in charge of the workshop next to him was also uncomfortable. As soon as he heard Mr. Zheng's words, he thought: It's broken!To put it more seriously, this is a leak. The secrecy regulations are the strictest in the military factory. Although he didn't say it, Mr. Zheng is one of his subordinates. In any case, there is a problem with his management. Of course, this It's not the most important thing. What he worries most is what Xu Ziling will think of Zheng Gong. You must know that although Zheng Gong is a little dull at times, he really has nothing to say in terms of technology. It was a big loss for their workshop to be fired. Thinking about it this way, he regretted calling him here.

Both of them were a little panicked, but they didn't expect Xu Ziling to ask such a question in the blink of an eye, and hearing his tone, he didn't mean to blame them at all. They were worried about getting into trouble, but they didn't expect such a result , I haven’t reacted all of a sudden, especially Zheng Gong, who suddenly felt that he had gone from hell to heaven. He even forgot to answer Xu Ziling’s question. arrive:

"I've done it once before, so I'm a little familiar with it, but the accuracy requirements were not as high that time."

"Can you talk about it?" Xu Ziling immediately became interested. He really didn't expect that there are people in China who make something similar to this thing. You must know that the plan made by the lion is completely designed according to the human body. The humanoid robots are also big and square, and he is very curious about where someone came up with this design.

It has been two years since this incident, but it had a far-reaching impact on Mr. Zheng. Because of this incident, he signed a lifetime confidentiality agreement. He could only shake his head, saying that he was out of line to say that he had made such a thing, and if he continued, he really didn't guarantee that he would spend the rest of his life in a dark room.Such a day is not what he wants!

Seeing that he refused to mention it, several people immediately understood the meaning contained in it, and of course they would not reprimand him for anything.And Xu Ziling no longer advanced this matter, but changed the topic to the original one, "Then can these be figured out?"

"I've only read a few drawings, and I'm still not sure." Seeing that Xu Ziling didn't ask anymore, Zheng Gong let out a sigh of relief, shook his head, and answered Xu Ziling, but immediately thought of something, and said: "If the other parts are also They all have the same requirements, and it’s no problem to make them out, but if the requirements are higher than the ones I’ve seen, our machine tools can’t make them either.”

"If you say that, then there is no problem. These are all uniform precision requirements. How long will it take to get it out?" Knowing that it can be done, Xu Ziling hurriedly asked how long it would take.

"That's a lot!" Hearing Xu Ziling's words, Mr. Zheng quickly looked at the drawings in his hand, counted the quantity in his mind, and then raised his head and said, "Full-automatic machine tools, the kind of small, uncomplicated parts. It’s quick to get up, and one can be made in two to three minutes. But the quantity is a bit too much, and several machine tools start working at the same time, so it may take four to five days.”

The machine tool of the military factory was successfully developed by relying on the technology stolen by Xu Ziling from a laboratory in the United States. At the beginning, the military factory got a prototype, but after the factory expanded, it organized manpower to make a few more on the basis of the prototype.

This kind of machine tool is not only extremely high-precision, but also truly fully automated. It has drawing scanning equipment. You only need to scan the drawing into the control computer of the machine tool, and then the computer will automatically control the operation of the machine tool according to the requirements on the drawing, and make the parts complete. Come out and make it exactly as it is on the drawing.

But this must also be that the drawings are correct. If the drawings are not correct, then the parts made will definitely not be usable.