.

spnps: The first update arrives!

Throughout 1916, China's main export trade partner was still the Allied countries, because the Mediterranean route was relatively safer, and the materials imported by the Allied countries from China exceeded that of the United States.

However, the United States still assumes the role of exporting steel and other materials to the Allies.

China's steel production is too little.

Although China has quickly surpassed the United States in other industries, especially China has many emerging industries that the United States does not have, but it is still inferior to the United States in railways and steel. [

But in general, there is nothing remarkable about America these days.

At this time, the industrial equipment in the United States was backward, and it could not be compared with China, which relied on advanced industrial technology to catch up. The United States had a little more railways and a little more steel factories.

Moreover, the iron and steel smelting technology of the United States has long lagged behind in the eyes of China. The United States is still using open-hearth steel technology, while China has begun to use converter steel technology.

Although compared to the quality, the quality of open hearth furnace steel is a little better than that of converter steel, but the difference is very small, and the production efficiency of converter steel is much higher than that of open hearth furnace steel.

In other words, post-war China does not need to update its industrial equipment, while the United States needs a major update of its industrial equipment after the war.

At the end of the year, three consecutive large groups of German technicians came to China.

When those German technicians came to China, they were all relieved, because both the Allies and the Allies began to replace skilled workers with raw hands, and then sent skilled workers into the war.

Because the production demand for those mechanical equipment was greatly reduced during the war, factories did not need so many skilled workers.

It doesn't take such high-level workers to make cannons.

When Jiang Yu asked about the situation of these workers, Zhou Ziyue reported to him:

"The number of these three batches of German technicians has reached nearly 5. Their technical level is much stronger than that of Romania, Serbia, and Russian technicians. Their precision processing technology completely surpasses these countries. With these workers, we in China The industry will soon rise."

"It seems that the Germans didn't cheat people with fake money." Jiang Yu was relieved immediately. China got these skilled machinery manufacturing workers, and it was no longer a fantasy to surpass Europe and the United States.

In terms of countries in this era, Germany's precision manufacturing technology is the most advanced and the scale is the largest.In addition, the level of precision manufacturing in small countries such as Sweden and Belgium is also good, but not as large as that of Germany.

In contrast, the United States relies on the development route of its own huge market, unlike Germany, which can only rely on advantageous industries such as machinery manufacturing and export for development. The precision manufacturing industry in the United States is actually not very developed.

In particular, the United States itself has relatively backward industrial equipment.From this point, it can be seen that American machinery manufacturing is actually still more at the stage of manufacturing the products of the first industrial revolution.

After getting these skilled craftsmen.China's precision manufacturing level will surpass that of the United States and quickly catch up with Germany.

After all, China is a country with a population of 5 million, and after annexing Laos, Cambodia, and Central South Province in the Golden Triangle of the Red River, controlling North Korea, Vietnam, and Indonesia, and economically colonizing Japan, the available population resources have exceeded 6 million, and Approaching [-] million.

Add up the whole of Europe, plus the United States, the population may not have this figure!

Although most of these people still maintain a relatively backward productivity model, China is not short of money now.What is missing is the popularization of advanced productive forces. [

After the arrival of these skilled workers, China will immediately have the ability to popularize those advanced productive forces on a large scale.

Because there are technicians, a large number of machine tools and equipment can be manufactured.

At the same time, it is also because China's industrial management model at this time has fully adapted to the 'Ford system'. Of course, it is not called the Ford system now, but the 'military industry system'.

Because this model is a production management system that Jiangyu has already implemented in Germany, the first application is the sub-production line.

With this system, production efficiency is greatly improved.

In the United States, only a few companies such as Ford have adopted this system, while in China, this production system is generally adopted.

The arrival of these German technicians has accelerated the expansion of many industries in China.

simply put.In today's China, the demand for machinery and equipment is too great, and it is simply impossible for China's senior technicians to manufacture them.

As a result, the scale of many advantageous industries that do not need to consume too much steel cannot be expanded.

These technicians come.Many problems have been solved.

At the same time, China also got many engineers from Germany. After these engineers arrived, China's construction speed also accelerated.

China has no shortage of labor force, but high-level talents.

Self-cultivation takes time. Although we are vigorously cultivating, it will take some years to receive results. Fortunately, the professional skills are not very deep these days. In addition, talent cultivation in special periods only requires basic education to lay a foundation. Can go directly to university to learn professional knowledge.The cultivation speed is also much faster.

Engage in engineering or something, you need engineers.

There is a shortage of engineers in China. For such a large country, construction projects are everywhere, so there are not enough engineers!

The greatest wealth obtained from trade with the Allies is not so much gold, but the high-level talents and high-level workers cultivated by these Germans.

In addition, China has also obtained many university teachers from Germany, and those teachers have also expanded the teaching staff of China's science and engineering disciplines.

Riding on the tailwind of Germany, China is accelerating its rise.

……

Hanyang Iron and Steel Works.

This is the earliest large-scale steel plant in China, and many shares were acquired by Japan.

After the Sino-Japanese War, Hanyang Iron and Steel Works was fully taken over by the Jiangyu consortium, and after two years of expansion, the first phase of the construction project of Hanyang Iron and Steel Works was successfully completed in 16. [

Xie Guangsheng is an ordinary employee of Hanyang Iron and Steel Plant, and at this time he is surrounded by great happiness.

The first phase of Hanyang Iron and Steel Works was put into production immediately after the completion of the project. At that time, Xie Guangsheng carefully observed the iron slag cleaning process he was responsible for.

After pondering for more than half a month, Xie Guangsheng finally figured out the way to deal with iron slag. This idea was quickly confirmed by the engineers in the factory that it can save the production cost of the steel factory. After this technology is implemented in the factory, every year can Create a profit of 20 yuan.

Soon Xie Guangsheng was commended, and a representative was sent down to verify it.

The verification was passed quickly, and the Central Ministry of Industry immediately rewarded Xie Guangsheng with a car and a commercial house of [-] square meters, and rewarded him with [-] yuan in cash.

At this time, in Chinese factories, as long as the production improvement method put forward by the worker is confirmed to be effective, the worker will be rewarded according to its significance.

This kind of reward is very generous, which greatly increases the enthusiasm of workers for production.

After all, in the past, workers kept repeating the labor process, thinking of getting off work early.After the introduction of this reward system, workers began to carefully observe the production process, and their attention was shifted to work. The fun of work first increased. Moreover, large-scale industrial production in various countries in the world has just begun these years. Many things are not complicated. Workers Even if they don't have professional knowledge, as long as they are willing to think about it, those workers who are more eccentric can always improve the production process.

There are more than 4 million people in China, and there are all kinds of fates. It can be said that the number of strange fates is the largest in the world. However, because the country's education can't keep up, the level of these people is lower.

As China is also ushering in the industrial age, some of these fateful people have made their own efforts, relying on evening classes and self-study, and many of them have been admitted to universities.

There are also many workers who have improved the production process during production labor. Although these small and detailed technologies are inconspicuous at first glance, they are terrifying when they are in large numbers.

Never underestimate the power of workers.

Senior talents are only responsible for advanced technologies, but advanced technologies are not enough to build the entire industrial framework. Those senior talents do not have the energy to study the detailed technologies, but workers are exposed to these things every day, so it is easy to make improvements and improvements to these technologies. innovation.

Xie Guangsheng is a child from the countryside. He couldn't find a match before. It wasn't until he joined the steel factory that some matchmakers were willing to match him.

However, after a few kisses, he was not very satisfied, now Xie Guangsheng was completely confident.

Soon Xie Guangsheng found a beautiful daughter-in-law who was a nurse in the hospital through the introduction of a matchmaker, and a happy family was formed in this way.

The factory also took special care of him and gave him a few more days off.

However, Xie Guangsheng hurried back to the factory to go to work. Now that the whole country is busy with large-scale production, he is too embarrassed to be lazy.

After this improvement in production technology, Xie Guangsheng fully realized that knowledge is wealth, so he went to the evening school held in the factory every day.

Moreover, his wife is a literate person. With the help of her, Xie Guangsheng soon successfully eliminated illiteracy and began to learn the professional knowledge of steel smelting.

A few years later, Xie Guangsheng became one of the junior engineers of the steel plant, and Xie Guangsheng was not satisfied with reaching the level of an engineer, and was still working hard to learn knowledge.

There are more and more workers like Xie Guangsheng in all walks of life in China. The factory not only encourages technological innovation to give workers a way to make a fortune, but also allows workers to learn related fields through evening schools. advanced knowledge.

Many factories not only hold evening schools, but also spare more time for workers to learn professional skills, and also adopt the method of bringing the old with the new, allowing old workers to teach new workers.

This model is most common among the various enterprises of the warlord oligarch consortium in Jiangyu.

This system makes China full of schools, the army is a school, factories are also schools, and there are night schools for literacy and Chinese popularization classes everywhere in society.

In this way, a strong national learning atmosphere has been formed.

The propaganda principle of newspaper public opinion also observes the characteristics of first measuring a person's achievement by knowledge, not by how much money a person has.

Thereby improving the learning enthusiasm of the whole people.

For example, the idea that selling tea eggs is not as good as learning and teaching is severely suppressed in newspapers and public opinion. (To be continued. If you like this work, you are welcome to come to the starting point to vote, monthly tickets, your support is my biggest motivation.)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like