star wars strongest infantry

Chapter 392 Done
There are many types of troubles, small and miscellaneous troubles, big and many troubles, so what Turner said is not wrong, because compared to the meticulous work of the barrel, the energy compression conversion module is simpler , but the amount of work is relatively large.

Of course Stan Lee also knew this, smiled lightly, raised his foot and kicked Turner, and said with a smile: "Stop flattering me, the old man, hurry up and do it, do it early and get out early, I have other things to do .”

Turner smiled, stopped talking nonsense, found what he needed from the pile of materials on the ground, and started to work.

This time, the materials Turner possessed were much better than when he was in Dark Star Bermuda, especially with the existence of top-quality materials such as Tubertan metal (star), which allowed some materials that were originally impossible to be compatible to be obtained. The successful fusion, and the Tibetan metal (star) itself has the effect of increasing the quality of all aspects of the material, which makes the newly generated material more outstanding in terms of strength and toughness.

Take Turner's Breaker as an example, if such materials are available, Turner doesn't even need to use the design of the spiral multi-hollow barrel when making the Breaker, because the Breaker has the highest ability. In terms of the 1000 energy level and the firing speed of no more than 1 times per second, with the pressure bearing capacity of this material, even a single barrel can withstand it.

But this time the design didn't work. According to Turner's design, the minimum attack power of this new sniper rifle is - 1800 energy level!

Rather than saying that it is a sniper rifle, it is more accurate to say that it is an energy cannon of small and medium power!
And the energy of this kind of power once again exceeded the range that the material could bear, so Turner still decided to adopt the design of the spiral multi-hole barrel, but this time the problem was not solved so simply.

Because Turner has performed too many energy compressions and splits in the previous energy compression and transformation process, in order to solve the situation that the energy is unstable after multiple compressions, and these split energies cannot be merged again , otherwise the energy becomes unstable again.

Therefore, Turner needs to design a solution to this problem based on the spiral multi-empty barrel.

Thus, such a scene appeared, and Turner once again fully invested himself in it. As two more Buddha statues were missing from the sculpture of the Hundred Buddha Banquet, the smelting of the materials Turner needed was completed.

Then, very quickly, a full section of 16-empty barrels was born under Turner's hands, followed by a section of 8-empty barrels, and finally, 4 empty barrels.

Yes, you read that right, the barrel designed and manufactured by Turner is not a single barrel, but a barrel with 4 full muzzles!

As I said before, if the energy is compressed into a single stream, it will still be unstable, and Turner has never thought of using any method to recompress the energy into a single stream, and positioning the final muzzle of the gun at 4 mouths is also a problem. It's just to make his next design easier to realize, otherwise, there is no problem even with a 16-port barrel!

After completing the production of the entire barrel, Turner did not stop, but quickly devoted himself to the final and most delicate production of the entire design, and this is the real muzzle of this gun.

Yes, this small module is very small and inconspicuous compared to the whole gun. It is the final design of the whole design and an important part that determines the success or failure of the design.

Turner first used the barrel material to create a hollow cap that would fit over the small design he had left at the end of the 4-barrel barrel—the final muzzle.

Next, Turner took the remaining metal that was used to make the energy box, first polished it to the size he needed, and then began to carve it.

That's right, this is also an energy box, but compared to the energy box used to give the energy bullet function, this energy box can be regarded as a miniature, because it needs to be installed at the muzzle position, such a small part There is no way to make it through a mold, only to carve it carefully like Turner.

The effect of the super brain is once again manifested. Every time Turner engraves, how deep the engraving is, and what kind of engraving it is, it is exactly as he expected. I have to say that if we only talk about accuracy, Turner is definitely the best in the world. A sculptor, because just like now, everything he sculpts is extremely precise, which even the best sculptors can't do.

Soon, the part was formed under Turner's hands. It was a square box-like part, and a small hole of the same size was cut on each of the four sides of the part.

Then, there are 4 excitation devices smaller than rice grains, which are embedded in the 4 small holes. These excitation devices are the most important part of the whole component and the most important part of Turner's design. Before making those The barrel, including the small energy box, took Turner less than an hour, but it took Turner a full hour and a half to make these four excitation devices.

Stress trigger device, this is Turner's name for this little thing that is not as big as a grain of rice. Its special feature is that it does not need to actively activate the device, but it will automatically activate when it is stimulated.

In the next step, Turner took a few more materials and smelted them into another metal. This metal is just the opposite of the metal used to make the energy box. It will not dissipate during the conduction process, but adheres to the metal very well. This material belongs to the existing material and does not need to spend too much effort.

The material was smelted quickly, and then pressed into a wire thinner than a hair, which was glued to the four trigger devices, and connected into a square circle on the outer layer of the miniature energy box.

After completing these, the entire design is more than half completed, and there are only two final steps left. One, wrap a layer of Toppler plastic on the outside of the miniature energy box to form a complete energy box; The energy box is inserted into the previously made muzzle cover.

Finally, hang the cap on the 4-port barrel, snap it shut, and you're done!

On the other side, Stan Lee has already completed the energy conversion and compression module, and has been quietly waiting to watch Turner operate.

Despite Turner's absolute confidence in his brain and hands, he still carefully and completely measured the gun barrel with a measuring tool, and finally heaved a sigh of relief after confirming that there is absolutely no problem. All parts are according to his design. It has been perfectly realized. Next, let's see the effect after the final synthesis!
(End of this chapter)