star wars strongest infantry

Chapter 403 Chameleon Skin

Chapter 403 Chameleon Skin

There are two difficulties in the design of the entire outer armor. The first is of course the problem of materials. According to the expectations given by Turner in the design drawings, the existing materials for making clothes, even those used to make military combat uniforms The material cannot meet this expectation, and if metal is used, there is no metal that is soft enough to be used as clothes in the universe.

But now, this problem has been solved by Turner. It is a new type of metal smelted from 12 rare materials. Its texture even exceeds that of silk metal, and its protection exceeds that of ordinary alloy metal. Such a metal is naturally satisfied. Turner's expectations, and at the same time, for the entire universe, this has pointed out a new development path for materials science. This is of course of great significance, and it is no wonder that Stan Lee will give Turner such praise.

The second difficulty in the design of the outer armor is to compress and transform the three-dimensional equipment into an ultra-thin flat equipment. This is also not a problem for Turner and Stan Lee.

and so……

The problem is gone, and the equipment will naturally take shape.

A piece of ultra-thin mechanical equipment over 50 square centimeters, Turner and Stan Lee worked together, and it didn't take long to complete it, and then it was embedded in the outer armor.

When Turner made the mold, he had already considered this problem, so the mold he made was originally two-layer, and there was a gap about 3 cm wide between the two layers, just to embed this ultra-thin protective film. Shield equipment is reserved in advance.

Turner still handed over the operation of this step to Stan Lee. Stan Lee carefully inserted the ultra-thin shield device into the gap of the outer armor, and used the reserved loose buttons to fasten the device, and then put the last Several wires are connected to those wire connectors.

Completed!

"That's it, it's over? Compared with the two guns before, it's really much simpler." Stan Lee completed the last step, and then asked: "However, I still don't understand one thing, the ultra-thin shield device Compared with this outer armor, it should exist independently. In other words, the activation of that shield has nothing to do with this outer armor. What about the connection? Also, on that piece of equipment, there is a part that is obviously not related to the shield equipment. It contains a start button and several security checks with input functions. There is also a separate energy supply device, which is used to what for?"

"Hey." Turner smiled triumphantly, and said, "Let me keep it a secret. Let's talk about it after testing the performance of this outer armor."

"Stinky boy, do this with me." Stan Lee narrowed his eyes and sneered, "The test is indeed going to be done, otherwise, let's use your revolver to do this armor test, what do you think? "

Turner couldn't help but suffocated when he heard the words, and smiled wryly: "I don't want you to play with people like this, you don't know the power of my gun. Although this outer armor has good protection ability, it is just a piece of armor worn on the body. A, even the targets erected in the No. 1 experimental hall are not comparable, and trying to use that revolver is not an experiment at all, but a direct destruction!"

Stan Lee giggled and said, "Isn't that good, what do you think?"

The joke is accepted, but the test is still to be done, and of course the weapon used for the test cannot be Colt-Monty Python, but Turner's "predecessor"-Desert Eagle-Vulcan.

The power of Vulcan is 200 energy level, while the explosive power of explosive shooting is 600 energy level, which can be used to test the body protection ability of the armor and the protection ability of the energy shield.

The first thing to test is the protection against common injuries. Turner took the Vulcan and fired 4 consecutive shots at the outer armor on the target, and then the three of them came up close to check the result and record data.

Or... just to check the results. When the three of them got closer, they found that Vulcan's energy rays up to 200 energy levels did not damage the outer armor at all, and did not even leave a trace on it. There was no trace, of course. There is no more data to record.

The next step is the energy shield test. Turner turned on the energy shield on the outer armor. Standing in the distance, Stan Lee and Zhen Ruo clearly captured that moment, the slight fluctuation in the air, which means The energy shield is turned on normally.

Then, Turner withdrew 50 meters away, and fired three more shots. The first two shots were energy rays, and the third shot was an explosive shot. The moment the energy ray touched the outer energy shield of the outer armor, The explosion was triggered!
boom!
A small explosion was formed in an instant, and Stan Lee and Zhen Ruo were startled at the same time. Stan Lee quickly asked: "Is it caused by energy instability again? If this effect is the same on both guns, then it seems that this effect is true. It is a benign effect that can be used on weapons, but your outer armor..."

He has seen the explosion effect of the burst shot on the giant python. The power of the explosion is more than double that of the normal energy bullet. Power, it is really possible to damage the outer armor.

Compared with Stan Lee and Zhen Ruo, Turner was much more calm and relaxed. After all, he had already seen the properties of the equipment the moment the equipment was completed, and he had enough confidence in the armor and the energy shield.

The three of them walked in to observe again, and sure enough, as Turner expected, the outer armor was still unharmed. At the same time, the moment the three of them came to the front, they also saw that the air fluctuated slightly again, which was the energy shield. The shield will disappear automatically when the duration is up, that is to say, the explosion just now didn't even shatter the energy shield!
Stan Lee nodded in satisfaction, and said, "Okay, all your designs and assumptions have been realized. Now, can you tell me what the wires connected to the outer armor are for?"

Turner smiled and nodded, took off the outer armor from the target, then reached out, patted, patted, patted again, and then...

The outer armor, which was originally red with a hint of cyan, had no beauty at all, suddenly changed. Almost instantly, the outer armor became exactly the same shape as the coat Turner was wearing!

[Tubertan-Chameleon Skin: Toughness 700, Protection 700.

Additional skills:
Energy Shield: Actively used to form a kinetic energy shield that completely resists damage below 250 energy level, 500% damage reduction below 70 energy level, 1000% damage reduction below 20 energy level, lasts for 30 seconds, and cools down for 1 hour.

Slippery: Passive skill, any attack within 0-45 degrees with the armor will be affected by the passive skill and will slide and shift, and the attack power will be reduced by 15%.

Ice Resistance LV3: Passive skill, increases the wearer's ice resistance by 15 points, can completely resist ice attribute damage lower than 15 points, and at the same time reduce ice attribute damage higher than 15 points, reduce the duration by 1 second Freeze and Frostbite effects for 3 seconds.

Lightning resistance LV3: Passive skill, increases the wearer's lightning attribute resistance by 15 points, can completely resist the lightning attribute damage lower than 15 points, and at the same time reduce the lightning attribute damage higher than 15 points, reduce the duration by 1 second 3 seconds of paralysis effect.

Automatic Healing: Passive skill, after being damaged, the durability will be restored at a rate of 10 point every 1 minutes and the wound will be automatically repaired.

Chameleon skin: divided into two forms: passive effect and active use.

Chameleon Skin (Active): You can change the color of this top armor at will, and at the same time, it can form a false exterior decoration, with no duration limit. Every time you use this skill, in addition to changing the armor style, it can also automatically change the armor. Cleaning, skill cooling time 5 minutes.

Chameleon skin (passive): This armor has a constant temperature effect, and it will always maintain a constant temperature of 30 degrees in an environment of -50 degrees to 24 degrees. 】

Turner took off his coat directly, put on the outer armor, and said proudly: "I sold this pass, are you still satisfied?"

(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like