Excellent puppet system
Chapter 19 Division of the Realms of Sculpture
Chapter 19 Division of the Realms of Sculpture
Again, puppetry is a rigorous science, and those who can become puppet masters are usually rigorous people.
At least in the treatment of puppetry, it must be rigorous.
Whether the puppet parts are arranged neatly can also be seen from the side whether a person is rigorous in treating puppetry.
System No. [-] once told Zhou Chen that the placement of items is a very small detail, and this detail is ignored by many people.When the level of the puppeteer is relatively low, this detail may not have much impact.But the higher the level of the puppet master, the more important the details.
Often the failure of refining a high-level puppet work is due to some small details!
Instead of waiting until the level is high to discover your own shortcomings in some details, it is better to develop a rigorous habit when the level is low, and not let go of any details.
Zhou Chen agrees with the words of the system, because there is also a saying in his original world, that is, details determine success or failure!
On the referee's seat, the chubby second-tier puppeteer Li Changfeng's eyes swept over the many registered disciples, and finally fixed on Zhou Chen again.Immediately afterwards, he seemed to have discovered something on Zhou Chen, his eyes swept over Zhou Chen's desk, and occasionally scanned the desks of people next to Zhou Chen, as if he was comparing something .
After a long time, Li Changfeng stroked his beard, and with a clear look on his face, he said to Lu Xiang and Li Junfeng next to him: "Have you noticed that Zhou Chen is very strict in placing items this week, look Look at the arrangement of all the items on his desk, and then look at the arrangement of other disciples' items."
Following Li Changfeng's voice, Li Junfeng and Lu Xiang immediately looked over, and followed closely, both of them also had a clear look, only listening to Li Junfeng nodding, while saying: "My son, as long as you don't go astray, There will be success in the future.”
Lu Xiang also nodded in agreement.
Time passed by every minute, and Zhou Chen finally finished carving all the parts one and a half hours after the start of the competition.
At the moment when the carving of the puppet beast's parts was completed, his eyes also inadvertently scanned the audience. There were only a few people who, like him, had completed the carving of the parts.
Most people have not been able to complete the carving of parts.
After carving all the parts of the puppet beetle, Zhou Chen put down the carving knife, adjusted his breath for a while, and then began to refine the core of the formation.
The core of the array is the most core part of the entire puppet beast. The quality of other parts carvings does not affect the puppet beast too much. At most, it is the difference between a complete product and a defective product.
The formation core is the key to determine whether the puppet can be successfully refined, and the formation core is also the key to determine the level of the puppet.
The same parts, using a first-order formation core, can only refine a first-order puppet beast, and using a second-order formation core, can refine a second-order puppet beast.
Of course, these are things to follow.
After adjusting his breath for a while, Zhou Chen took out the smallest carving knife from the whole set of carving knives and began to carve the core of the formation.
The complex array unfolded smoothly on his body, and the whole carving process was like flowing water, without any stagnation in the array.
Even the three puppet masters including Lu Xiang on the referee's bench couldn't pick out a single flaw in Zhou Chen's formation.
It can be said that Zhou Chen performed supernormally in the engraving of the array this time.
Originally, it took Zhou Chen about an hour to carve such a complicated array, but because of his extraordinary performance this time, he only spent less than four to ten minutes to complete the entire array.
At the moment when the last stroke of the formation was made, Zhou Chen also looked up at the time. He was also a little surprised when he found that it only took him four or ten minutes to complete the formation.
At this moment, a systematic electronic sound came from his sea of consciousness: "Congratulations to the host, the carving knife technique has gone a step further, reaching the level of entering the room at the second level."
Zhou Chen was taken aback for a moment, and then asked, "Is there a level of carving knife technique?"
"Of course there are. There are five realms in the carving knife technique, which are the first realm to get started, the second realm to enter the house, the third realm to be harmonious and satisfying, the fourth realm to preserve the artistic conception, and the fifth realm to return to nature." The system replied.
Hearing this, Zhou Chen was stunned again, and then asked a little speechlessly: "Then number one, don't tell me that my previous sculpting realm can only be regarded as an entry level?"
The system replied decisively with a 'yes'...
Then Zhou Chen was speechless, thinking that for these days, he always thought that his carving knife skills were already very high, but it turned out that he had been making progress at the entry level...
Thinking of this, Zhou Chen asked the system again: "No. [-], my previous engraving level was only entry-level, so there are so many registered disciples here, their engraving, is it possible that their engraving level can also be regarded as entry-level?" ?”
After Zhou Chen asked this sentence, Zhou Chen could feel that some special energy seemed to overflow from his sea of consciousness.
When the energy returned to his sea of consciousness again, the system replied with an electronic voice: "I just observed it. Among the people who are carving in this martial arts arena, only a small number of people have reached the entry level carving level. For the vast majority of people, the level of engraving has not even been able to get started."
Now Zhou Chen finally understood. It turned out that it wasn't because of his superb carving skills, but because of the poor carving skills of the people around him, which set off his high carving skills...
In fact, he is only an entry-level level...
At the same time, Zhou Chen also realized that the energy that had just overflowed from his sea of consciousness was released by the system to observe the surrounding conditions.
At this moment, the system's electronic voice sounded again: "The entry-level carving knife technique is also a prerequisite for becoming a puppeteer.
Only when the carving level reaches the entry level can the finished puppet beast be refined.
The engraving level has not yet reached the entry level, and the refined puppets can only be regarded as defective products. "
After listening to the system's popularization of puppetry knowledge, Zhou Chen's mentality also recovered.
He looked around and saw that many registered disciples were already carving core formations, and many registered disciples failed to carve core formations in the morning due to various reasons such as unstable knives or excessive strength.
However, this time the competition does not limit the number of engravings of the core formation. If you fail, you can change a piece of material and try again.
After reading the surrounding situation, Zhou Chen began to assemble the puppet beasts.
When Zhou Chen started to assemble the puppet beetle, Lu Yu and Gu Xuan were also assembling the puppet beetle, and their assembly progress was a little faster than Zhou Chen.
(PS: There will be a second update around [-]:[-] tonight!)
(End of this chapter)
Again, puppetry is a rigorous science, and those who can become puppet masters are usually rigorous people.
At least in the treatment of puppetry, it must be rigorous.
Whether the puppet parts are arranged neatly can also be seen from the side whether a person is rigorous in treating puppetry.
System No. [-] once told Zhou Chen that the placement of items is a very small detail, and this detail is ignored by many people.When the level of the puppeteer is relatively low, this detail may not have much impact.But the higher the level of the puppet master, the more important the details.
Often the failure of refining a high-level puppet work is due to some small details!
Instead of waiting until the level is high to discover your own shortcomings in some details, it is better to develop a rigorous habit when the level is low, and not let go of any details.
Zhou Chen agrees with the words of the system, because there is also a saying in his original world, that is, details determine success or failure!
On the referee's seat, the chubby second-tier puppeteer Li Changfeng's eyes swept over the many registered disciples, and finally fixed on Zhou Chen again.Immediately afterwards, he seemed to have discovered something on Zhou Chen, his eyes swept over Zhou Chen's desk, and occasionally scanned the desks of people next to Zhou Chen, as if he was comparing something .
After a long time, Li Changfeng stroked his beard, and with a clear look on his face, he said to Lu Xiang and Li Junfeng next to him: "Have you noticed that Zhou Chen is very strict in placing items this week, look Look at the arrangement of all the items on his desk, and then look at the arrangement of other disciples' items."
Following Li Changfeng's voice, Li Junfeng and Lu Xiang immediately looked over, and followed closely, both of them also had a clear look, only listening to Li Junfeng nodding, while saying: "My son, as long as you don't go astray, There will be success in the future.”
Lu Xiang also nodded in agreement.
Time passed by every minute, and Zhou Chen finally finished carving all the parts one and a half hours after the start of the competition.
At the moment when the carving of the puppet beast's parts was completed, his eyes also inadvertently scanned the audience. There were only a few people who, like him, had completed the carving of the parts.
Most people have not been able to complete the carving of parts.
After carving all the parts of the puppet beetle, Zhou Chen put down the carving knife, adjusted his breath for a while, and then began to refine the core of the formation.
The core of the array is the most core part of the entire puppet beast. The quality of other parts carvings does not affect the puppet beast too much. At most, it is the difference between a complete product and a defective product.
The formation core is the key to determine whether the puppet can be successfully refined, and the formation core is also the key to determine the level of the puppet.
The same parts, using a first-order formation core, can only refine a first-order puppet beast, and using a second-order formation core, can refine a second-order puppet beast.
Of course, these are things to follow.
After adjusting his breath for a while, Zhou Chen took out the smallest carving knife from the whole set of carving knives and began to carve the core of the formation.
The complex array unfolded smoothly on his body, and the whole carving process was like flowing water, without any stagnation in the array.
Even the three puppet masters including Lu Xiang on the referee's bench couldn't pick out a single flaw in Zhou Chen's formation.
It can be said that Zhou Chen performed supernormally in the engraving of the array this time.
Originally, it took Zhou Chen about an hour to carve such a complicated array, but because of his extraordinary performance this time, he only spent less than four to ten minutes to complete the entire array.
At the moment when the last stroke of the formation was made, Zhou Chen also looked up at the time. He was also a little surprised when he found that it only took him four or ten minutes to complete the formation.
At this moment, a systematic electronic sound came from his sea of consciousness: "Congratulations to the host, the carving knife technique has gone a step further, reaching the level of entering the room at the second level."
Zhou Chen was taken aback for a moment, and then asked, "Is there a level of carving knife technique?"
"Of course there are. There are five realms in the carving knife technique, which are the first realm to get started, the second realm to enter the house, the third realm to be harmonious and satisfying, the fourth realm to preserve the artistic conception, and the fifth realm to return to nature." The system replied.
Hearing this, Zhou Chen was stunned again, and then asked a little speechlessly: "Then number one, don't tell me that my previous sculpting realm can only be regarded as an entry level?"
The system replied decisively with a 'yes'...
Then Zhou Chen was speechless, thinking that for these days, he always thought that his carving knife skills were already very high, but it turned out that he had been making progress at the entry level...
Thinking of this, Zhou Chen asked the system again: "No. [-], my previous engraving level was only entry-level, so there are so many registered disciples here, their engraving, is it possible that their engraving level can also be regarded as entry-level?" ?”
After Zhou Chen asked this sentence, Zhou Chen could feel that some special energy seemed to overflow from his sea of consciousness.
When the energy returned to his sea of consciousness again, the system replied with an electronic voice: "I just observed it. Among the people who are carving in this martial arts arena, only a small number of people have reached the entry level carving level. For the vast majority of people, the level of engraving has not even been able to get started."
Now Zhou Chen finally understood. It turned out that it wasn't because of his superb carving skills, but because of the poor carving skills of the people around him, which set off his high carving skills...
In fact, he is only an entry-level level...
At the same time, Zhou Chen also realized that the energy that had just overflowed from his sea of consciousness was released by the system to observe the surrounding conditions.
At this moment, the system's electronic voice sounded again: "The entry-level carving knife technique is also a prerequisite for becoming a puppeteer.
Only when the carving level reaches the entry level can the finished puppet beast be refined.
The engraving level has not yet reached the entry level, and the refined puppets can only be regarded as defective products. "
After listening to the system's popularization of puppetry knowledge, Zhou Chen's mentality also recovered.
He looked around and saw that many registered disciples were already carving core formations, and many registered disciples failed to carve core formations in the morning due to various reasons such as unstable knives or excessive strength.
However, this time the competition does not limit the number of engravings of the core formation. If you fail, you can change a piece of material and try again.
After reading the surrounding situation, Zhou Chen began to assemble the puppet beasts.
When Zhou Chen started to assemble the puppet beetle, Lu Yu and Gu Xuan were also assembling the puppet beetle, and their assembly progress was a little faster than Zhou Chen.
(PS: There will be a second update around [-]:[-] tonight!)
(End of this chapter)
You'll Also Like
-
I, a mercenary, became a beautiful silver-haired boy
Chapter 1600 22 hours ago -
There are too many villains, so it's reasonable for the heroine to fall for him!
Chapter 164 22 hours ago -
Became a delicate girl, and was made to cry by the childhood sweetheart
Chapter 123 22 hours ago -
My girlfriend thinks I'm crazy, I'm picking up gold in the end times
Chapter 338 22 hours ago -
Young White Horse: The Drunken Swordsman shocked Little Dongjun at the beginning
Chapter 182 22 hours ago -
Pirates: I am a great swordsman
Chapter 551 22 hours ago -
One Piece: My Conqueror's Haki can be trained automatically
Chapter 290 22 hours ago -
Special Forces: If I ask you to scout, you will overturn the wolf's teeth?
Chapter 352 22 hours ago -
Weird asylum, you're taking in a human being like me?
Chapter 1038 1 days ago -
Fishing Druid in Another World
Chapter 480 1 days ago