my old life

Chapter 2337
Now the entire head of Taizilong is covered with plaster, only two plastic hoses are exposed outside, which are inserted into the nostrils for ventilation.

I don't know if Mike found Taizilong's safe, or some facial recognition or something, or could he have spent so much effort?
This method of rubbing the face with plaster is not difficult, but I have never heard of such a thing before.

When I was a child, many small vendors on the side of the road would use leather goods to fill plaster. They could make all kinds of exquisite animated characters, and they could also make plaster products such as piggy banks.

But this is the first time I have seen plaster cast on a human face, and it also made me see the horror of human greed!
Jennifer kept blowing it with a hair dryer, and after about an hour the plaster had set and my arms were sore, but I still wondered what they were going to do next.

I have never seen this kind of skill before, it is similar to a human skin mask but different, maybe I can learn a trick too!
When the plaster solidified, Carrera took out a steel wire and polished it horizontally from the top of the head, as expected, to cut the plaster in two.

The steel wire is very thin and will not damage the overall structure, and the horizontal cut will not damage the facial lines. Even the ears are vacated, and a steel wire is slowly polished.

Every time the steel wire is pulled, some plaster powder will be worn away. Carrera is very patient and careful. I know he is not worried about Taizilong's life and death, he just needs to maintain the integrity of the plaster.

The steel wire was cut horizontally from the top of the head and wound to the back of the ears, and then cut along the neck to the shoulders, where the connection was disconnected.

The whole process took about half an hour, and Carrera carefully removed the first half of the plaster cast. This is a complete face plus neck!
The viscous thing just applied acts as a lubricant, and the plastic paper is to facilitate the separation of the plaster and the skin.

When Carrera took off all the plaster on Prince Long's face, he was already sweating profusely. It can be seen that he was very serious and exhausted his energy.

A rubbing model of a head is done in this way, and then the interior of the plaster is processed, and then a new plaster is poured.

I watched without saying a word. This is not a difficult technique. I keep every process in my heart. As long as the materials are properly prepared, I can complete it.

The gypsum poured into the model dries much faster, and it is blown on the air conditioner, so that everyone can rest this time.

Time slowed down at this moment, and before I knew it, it was already bright outside.

I don't understand why a plaster head is made. If you need facial recognition and the like, just pull Prince Long away?

After the plaster is completely dried, the outer mold is slowly removed, and a standard plaster head appears in front of you, which looks exactly the same as Prince Edward's face!

The gypsum head looks exactly the same except for the eyes and hair, and the chin and lips look exactly the same. It's amazing!

Any camouflage skills are inferior to this image, because this is a template made directly on the face of a person, and it is completely reproduced!
The one-to-one reproduction restores the human appearance to the greatest extent, which is different from making wax figures, because it is directly reproduced on the head of Prince Edward!
Everyone took a short break and had breakfast. They felt a lot of strength after eating enough. I don't know how long it will take to complete this plaster head.

After the meal, Carrera took out a tool bag, which was full of files of different sizes, some files looked like screwdrivers, and some looked like toothpicks.

The tools looked professional, and Carrera started to fix the eyes and the placement of some details.

Only at this moment did I know why he measured Prince Long's face before, every data must be accurate!
A one-to-one replica of the face shape is fine, but small deviations will give people a different feeling of charm!

Time passed slowly, Carrera's movements were very careful, and the repairs were very slow bit by bit, and the file would not even be used for more than ten minutes.

After the modification, the plaster portrait became very realistic. Carrera is still calculating the value of each area, and then gently modifying a little bit of plaster...

When Carrera lighted a cigarette to rest after the modification, he expended the most energy in the whole process, and he also gave people a feeling of fanaticism.

After the plaster is modified, it is polished. Carrera carefully polished it with sandpaper. It looks like he is carving a piece of jade!
I am amazed at the power of this technique, I am shocked at the ingenuity of this technique, but I don't know what they want this plaster head to do.

Now Prince Dragon is here. If necessary, it can be done directly on his head. Is it necessary to reproduce a plaster head separately?

Could this be one of Mike's quirks?He wants to engrave the head of Prince Long as a souvenir?
Jennifer and Carrera didn't say anything, and I didn't ask, and sooner or later I'll know what this avatar is for!
After the gypsum head was polished and smooth, I started to apply viscous lubricating oil, and it still seemed a little sticky. I don't know what to do next.

When the plaster head is finished, it starts to spray. It looks like a high-pressure bottle of self-spray paint, which is evenly sprayed on the plaster head.

It's just that the color of the spray is white, because the spray is slow and there is no flow of paint. After one spray, it is sprayed again. I don't know how many times I have sprayed it over and over again.

The entire plaster head looks much smoother and more rounded, even as lifelike as a person, but the skin color is pure white.

Half an hour later, the plaster head was put into the oven. At this moment, I realized why I didn’t use the head of Taizilong directly, because it is impossible to put a human head in the oven!
It is very easy for them to reproduce the face of the prince dragon, but it is very difficult to put it in the oven. This plaster head is to replace the real head!

Now it seems that they have no intention of killing Prince Long, perhaps because a human head will deform when put in an oven...

When the oven started to work, Carrera let out a long sigh of relief, and Jennifer lay directly on the bed.

"You're done!"

I lit a cigarette without saying anything, I don't know what it will look like after it is finished, but I know that I just made a 'human skin mask'!
The material of the mask should be the material sprayed on the high-pressure bottle just now. I can't understand all the English on it, but this does not hinder my judgment.

When making templates twice before and after, there was an extra high-pressure spraying process, which should be the real purpose.

This mask is different from the one of the eight-faced ghost. This mask is all-round, even the hair is covered in it, and there is no seam from the face!
There will be seams in the human skin mask, the most obvious places are under the nose and behind the ears, even after clever camouflage.

I don't know how good they are at making human skin masks, but I'll wait and see!

Time passed slowly, I leaned on the bed to rest and refresh my mind, and the lack of rest and sleep made my spirit lack.

Two hours later, the oven ding-dong, and at the same time I opened my eyes, wondering what kind of human skin mask I would see.

Carrera took out the plaster head. At this moment, there seemed to be an extra layer of skin on the head, white and yellowish skin!
I was shocked by the skin on the plaster head in front of me, as if I really had a layer of skin, and all the spray glues were solidified!

"It's just amazing!" I couldn't help exclaiming, because this is almost exactly the same as Taizilong!
"Damn Asians, the skin color needs to be adjusted."

I am not happy to hear this, what is a damn Asian?How many people were killed in one shot?

"Hey, hey, can't sleep and complain that the bed is crooked? If you're not good at technology, don't mess around with shit!"

I looked at Carrera with a provocative face, and scolded the brat in front of Hades, isn't that just giving me eye drops?
"Adjust it first, and then spray paint and color it." Jennifer smoothed things out, and Carrera turned around and took out her laptop.

Jennifer broke the plastic sheet wrapped around Prince Long's head, unexpectedly Prince Long woke up!

His eyes were full of horror, for a moment he had no time to pretend to be asleep, and at the same time he couldn't hide the stimulation brought by the light.

"Good boy, sleep a little longer!" Jennifer knocked him unconscious without giving him any chance to speak.

Just now Prince Long woke up, so he could hear the conversation between us, I don’t know how he will feel after knowing that he has been reproduced...

(End of this chapter)