Super industrial overlord

Chapter 139 Non-CNC High Precision Machine Tools

"Okay! Then let's take this bed to the installation workshop!" Zhang Yi said to Xueba next to him while looking at the machine bed that had just been produced from the glass production line.

This newly manufactured bed, due to the characteristics of glass, makes this machine look very beautiful, and any part of the bed looks very smooth.

After coming to the machine tool assembly workshop, many beginner mechanical masters in the workshop began to assemble the machine tool.

Moreover, due to the design of this machine tool, the accessories of the machine tool are all completed by many masters in the factory. Even the main motor on the machine tool is also designed and manufactured by these masters in the factory. Zhang Yi is still the top student in the factory who has very high expectations for this machine tool.

After all, the precision level of the parts in this machine tool is not comparable to that of ordinary machine tools, so the precision level of these parts is more than one level higher than those of ordinary machine tools.

Even the main parts in some key parts have reached the standard of ultra-high-precision machine tools, that is, the level of 0.001.

At the same time, Zhang Yi and his factory's top students are comparable to the ninth-level all-round technicians, and they have reached the highest level in terms of lathe, fitter, and so on.

Therefore, in terms of assembly, it is not comparable to ordinary machine tool factories. Even if the precision requirements of these accessories are so high, assembly is not difficult for these top students.

You know, in general machine tool manufacturers, even if there are a few ninth-level technicians or fitters, these people will definitely be regarded as treasures in those machine tool factories.

"Mr. Zhang! Help me get the screws! Mr. Zhang, what are you doing? Assemble the machine tool and let us come. You just need to stand aside and watch us or help us get the accessories. Assembling high-precision machine tools is not a problem." You can do it now."

When assembling the machine tool, Zhang Yi saw many top students busy, so he wanted to go to the battle himself, but in the end it was a disservice, and he was directly beaten back by the top students who were assembling the machine tools.

Although the first machine tool of their colorful stone is just an ordinary high-precision machine tool, the assembly is also very cumbersome. It took Zhang Yi and the others several days to complete the assembly of this machine tool.

Of course, like other machine tools, whether there is any problem with the produced machine tool can only be discovered during the trial production process.

In the same way, the machining accuracy of the machine tool cannot be reflected on the workpiece until the precision machining is carried out.

This machine tool was independently designed by Bawanghong, a junior and intermediate student. Since this is an ordinary machine tool, there are no complicated NC programs and numerous servo motors on it.

So when designing this machine tool, Zhang Yi didn't ask more masters to help.

As an intermediate-level student, Wang Hong designed an ordinary high-precision machine tool, which was not difficult for him.

What's more, this machine tool is mainly used to test whether the No. 2 glass developed by Jia Qing can be used as the bed of the machine tool.

If the No. 2 glass developed by Jia Qing is verified on this machine tool, it can be used as a bed on an ultra-high-precision machine tool.

Then when Zhang Yi and his colorful stones produce ultra-high-precision CNC machine tools in the future, they don't have to worry about the bed of the machine tool.

When it was night, Zhang Yi's ordinary machine tool that used glass as the bed of the machine tool finally completed the installation, and in the next morning, these top students debugged the machine.

After the machine tool was debugged and tested, the performance of this machine tool shocked everyone present. Although it was only a non-NC machine tool, it was still under the operation of these top students. , The parts processed by this machine tool easily reach the level of 0.001mm.

When this machine tool is successfully running, and it performs very well, it proves that Zhang Yi's previous whimsy is feasible, and it is feasible to use No. 2 glass as the bed of their ultra-square precision machine tool in the future.

"Master Wang, the success of our ordinary machine tool shows that my previous idea is feasible, so do you have any comments, Master Wang?" Zhang Yi asked.

In fact, Zhang Yi was whimsical before and wanted to use the special glass of their factory as the bed of the machine tool. Among them, Wang Hong was the most opposed, because she had never seen anyone use glass as the bed of the machine tool.

Even in their Red Alert universe, no one used glass as the bed of the machine tool so crazily. Although the performance of this glass is very good, it has far surpassed the gray iron used in the bed of ordinary machine tools.

So Wang Hong didn't think that Zhang Yi's whimsy could be realized, so he resolutely opposed it.

"Mr. Zhang! Maybe your idea is right, maybe I'm too persistent." Wang Hong replied convincingly.

"Master Wang! You see, the bed problem of our colorful stone has been completely solved, so we should also prepare for the production of CNC machine tools. After all, Zhao Feng's motors are basically designed, and now the only thing left is the production line. And Qian Guang and his team have completed the transformation of the lithography machine, and are now busy manufacturing other equipment for industrial control chips. At the same time, according to Qian Guang and his team, the production line of this industrial control chip will be completed in another month.

Although the lithography machine on this production line can only reach ten nanometers at most under multiple exposures, and the output of the production line is not high, it is enough for our Qicaishi Group at present, and even with this For a long period of time, we no longer need to purchase industrial control chips from outside.

I don't know how you are doing with the design of the first ultra-high-precision machine tool of our Qicaishi Group, Master Wang, and if you have any other requirements. "Zhang Yi asked.

"Boss! As for the overall design of the CNC machine tool, the design of the CNC machine tool has basically been completed, and it is only necessary to make some modifications.

I don't know when the boss is going to start manufacturing ultra-high precision CNC machine tools? "Wang Hong asked.

Zhang Yi couldn't answer Wang Hong's question.After all, the CNC machine tool system is still being designed, and the chip design is very slow, at least until May or June before it can be completed.

But Zhang Yi immediately thought, why did he have to wait until their factory's own chips came out before starting to produce ultra-high-precision CNC machine tools?Why not buy chips on the market first and produce machine tools first.

If he is afraid of leaking secrets, then he can also go to Fang Jinming and his military to get some chips for use first, and then replace them with his own chips after their own chips are produced in the future.

(End of this chapter)