Rebirth of the 80s New Farmer

Chapter 1457 Don't be in a hurry

In the current world industry, the mechanical processing industry of Western developed countries and some Eastern European countries such as the Soviet Union has already used four-axis and five-axis linkage machine tools.

For example, the Soviet Union is so stupid that the United States now even has nine-axis five-linkage machine tools, and Huaguo wants to buy a five-axis five-linkage machine tool, but they are blocked.

Wan Feng sighed. It is conceivable that even the Hua people would swallow their breath in the face of the exorbitant asking price of the other party, but even so, they would not sell it to you.

Otherwise, technology must be in your own hands. If I have it, I won’t be afraid even if it is not as advanced as you. At least I have it. I can stand upright and not pee on you.

Although the technology in his hands is the Soviet technology that Western countries seem to look down on.

Is the technology of the Soviet Union backward?

In fact, in terms of machine tools, the technology of the Soviet Union is not inferior to that of Western countries. This is because their own technology is not weak, and they are not as useless as reported in later media.

At the end of the Cold War, the Western media, which held the right to speak in the world, had no time to smear the Soviet Union and the subsequent Russian screw, so they would not report objectively.

Everything in the Soviet Union has been distorted and framed, naturally including various technologies.

Coupled with their own carelessness, this allowed the Soviet Union's machine tool technology to be artificially buried.

The Soviets didn't work behind closed doors on machine tools. They fiddled with themselves. Apart from their own technology, they imported a lot of advanced machine tools from Italy, the country of Switzerland.

Far more than the five sets of machine tools bought from Toshiba.

But if others sell it, there will be nothing wrong with it, and if Toshiba sells it, it will be bad luck.

Even if they belong to the same Western camp, the treatment is not the same.

In [-], the machine tool Toshiba sold to the Soviet Union was a nine-axis CNC machine tool, which was the key equipment for processing the seven-blade large-slope propeller of the strategic nuclear submarine.

At that time, the Soviet Union did not have such machine tools. Without them, it would have been impossible to process the seven-bladed large skewed propellers of nuclear submarines.

It's just that the precision after processing is not enough, which leads to excessive noise of the propeller.

This has something to do with the character of their nation and has a lot to do with the DNA in their blood.

Not only the Soviet Union, but also the United States.

They all like things that are big is good and thick is fierce.

Therefore, both the Soviet Union and the United States have a lot of thick, big and stupid things.

These two countries have similarities in industrial manufacturing, and they don't care about the products after they are manufactured.

They were in charge of inventing, and they didn't bother to process it after the invention. Ri Ben and De Guo picked up this technology and were responsible for finely crafting these things.

The products of the later inventors are not as good as the later improvers in terms of quality.

Because of this, Wan Feng did not think that the Soviet machine tool he got was very backward, even if it was backward, it was only defective in the degree of fine workmanship.

In terms of meticulous craftsmanship, the Chinese people are no worse than the stupid Japanese. They can do a good job as well as the Chinese people.

If the nation had flaws, Huaguo would not have completed the 70-year journey of Western developed countries in 300 years.

There was a ten-year delay in the middle.

"Gong Li! What are the two machine tools we are promoting now?" Wan Feng called Li Da over.

"These two machine tools are the most advanced machine tools produced by the Leningrad Machine Tool Plant. One is a 2С42-65 eight-axis four-linkage CNC machine tool with a microprocessor MS1201. Equipment for drilling, milling and boring .”

Li Da only mentioned one type, but he didn't mention the other type.

That's it, Zhu Guoxiong was quite surprised.

"Are you working on an eight-axis four-linkage machine tool?!"

Where does this make sense?
The national military industry unit used the guise of a civilian company to buy foreigners' five-axis linkage machine tools, and they were as humble as that and they didn't sell them.

And an unknown small factory in this small valley is secretly researching eight-axis four-linkage machine tools.

"So you have now produced a five-axis five-linkage machine tool?"

Wan Feng turned to Li Da. He didn't know the exact information about the lathe, but he knew it was definitely produced.

"We haven't officially produced it yet, just produced a few prototypes."

"Prototype? Are you using it?"

"There are two in use in the processing shop, and they have been in use for several months."

"It's been in use for several months? Then why don't you put it into production?"

"Why are you in a hurry?" Wan Feng answered casually.

broken!What he said made Zhu Guoxiong very angry.

"Where's my gun? I have to shoot this little bastard." Zhu Guoxiong stretched out his hand and groped his body.

Wan Feng's head was covered with cold sweat.

Hold the grass!My Lord!I just said there is no rush and you just grab it?
If he does pull out the gun, am I going to run?
Zhu Guoxiong didn't take out the gun from his body, but took out the cigarette.

"Do you know how many factories in the military need such machine tools? Are you in no hurry?"

"Grandpa! Didn't your military tell me in a hurry? Besides, although we have made a five-axis and six-axis machine tool, the stability, precision and durability have to go through actual combat experiments, otherwise, it is worthwhile to push it to the market. Responsibility!"

Wan Feng lit a cigarette for Zhu Guoxiong with great insight.

He really wanted to burn Zhu Guoxiong's beard with a shake of his hand, but the old thief was also out of tune, and even threatened him with a gun.

But in the end, I just thought about it, I didn't dare!
This explanation is still very reasonable, Zhu Guoxiong nodded.

"What we want to do is a century-old enterprise, but we don't plan to do it today and it will be yellow tomorrow. Therefore, the quality must pass the test, even if it does not reach the international advanced level, it cannot be much worse than them."

"That makes sense, take me to your processing workshop to have a look."

After entering the workshop, Li Da gave an introduction: "The machine tools used in this workshop are all kinds of Soviet machine tools that we imitated, but after we improved the problems left by the Soviets' carelessness, the precision of these machine tools is now higher than before. Quite a few."

Zhu Guoxiong carefully observed these machine tools. He was also a mechanic and was no stranger to these things.

Sure enough, I found that the machine tools used in this workshop were very different from those traditional machine tools in Huaguo, both in style and work.

Li Da led Zhu Guoxiong to a five-axis lathe.

"Originally, there were two five-axis machine tools working in this workshop to produce core components for motorcycle engines, but one of them got married two days ago and had a wedding holiday, so only this machine tool was running."

A 25-year-old young man turned on the machine tool. His job is very easy. When a part is finished, he only needs to install the blank on the workbench and start the machine tool.

The rest is left to the machine itself.

Cutting, drilling, boring and milling, one after another, in about a few minutes, a very fine part is produced.

Seeing all this, Zhu Guoxiong took a deep breath.

　Thanks to book friend 20190511172644078 for the reward of [-] coins!
　　
　
(End of this chapter)