Black tech dad

Chapter 61 61. The Cooperation Ends Here
Feng Hao changed into his overalls, walked to a machine tool, picked up the engine blank with his bare hands, and fixed it on the machine tool.

Rough machining and finishing machining are to shape the structure of the entire engine, and to polish various cylinder water channels, etc.The more top-level the engine, the stricter the machining accuracy, and the error cannot even exceed a fraction of a hair!

For the advanced engines of first-line car companies, they have supporting high-precision machines to rough and finish the engine blanks. Everything follows the production process, and it is very simple to complete this process.

However, the engine technology and drawings provided by Feng Hao are different from Shinhwa GS4 in terms of structure. In other words, the machine tools in the workshop are not competent, and only experienced technicians can operate the machine tools to polish it and process the engine that meets the requirements.

As the machine tool started, the gears collided with each other and entangled with each other. Feng Hao suddenly shut down the machine tool and retreated to a safe area.

Gao Weiguo hurriedly stepped forward and asked, "What's wrong?"

"This machine tool is faulty." Feng Hao said.

Fault?

Yang Rongyi sneered in his heart, and said to another worker: "Xiao Zhang, you are responsible for testing this machine, is there any fault?"

The worker surnamed Zhang came out and replied: "I just finished testing today, everything is fine and there is no fault."

Did you hear me?No glitches!
Frightened by Gao Weiguo's majesty, Yang Rongyi didn't dare to speak, but he could convey what he wanted to express with his eyes, and slap his face with facts.

"Wait, don't rush away." Feng Hao pointed to the machine tool and said to the worker surnamed Zhang, "Come and check the gears here. I heard the sound of the machine running just now. There should be something wrong here."

"Tch, do you think you are a legendary craftsman from a great country in the last century? You can tell if there is any problem with the parts of the machine tool just by hearing the sound? Pretend to be struck by lightning." The worker surnamed Zhang muttered.

"Go if you are told, what are you mumbling about?" Yang Rongyi urged with a straight face on purpose.He didn't believe that Feng Hao could hear the malfunction by relying on his voice. Since Feng Hao wanted to pretend, let him pretend, and be careful that if he failed to pretend, he would be fooled.

Being scolded by Yang Rongyi, the worker surnamed Zhang reluctantly came out, took the inspection equipment, and inspected the location indicated by Feng Hao. After 5 minutes, his face changed.There is really a fault, God!
"This……"

Everyone was in an uproar, looking at Feng Hao in a different way.

Gao Weiguo took the opportunity to strike and said: "This is the passenger car worker! If everyone is as careless as he is, and there are omissions in work, then the passenger car can be disbanded on the spot, and our Automotive Research Institute finds another company to produce it! The world You are not the only ones who can produce cars!"

Gao Weiguo's words were very serious. No one dared to make trouble at this time. The worker surnamed Zhang was so frightened that he fainted. This was his mistake at work!
Too lazy to care about the bad things about passenger cars and the Institute of Automobile Research Institute, Feng Hao took the engine blank and walked to another machine tool, powered on and operated normally.As Feng Hao used the machine tool to process and polish the engine blank, everyone including Yang Rongyi was dumbfounded.

This move is methodical, just like an experienced old technician who has been immersed in it for decades!This guy, did he learn to operate a lathe from the womb?And the knife workmanship is incredible!I never thought that there is such a way of moving, it is eye-opening, Mao Sai suddenly!

Seeing Feng Hao's smooth appearance, Yang Rongyi had an intuition that this young man might be even more powerful than he imagined, and he was hiding something deep.

Since multiple machine tools are required to process and polish the engine blank, after Feng Hao used one machine tool, he carried the engine blank with his bare hands and walked to the other.

Over time, someone discovered a blind spot.

You can pick up an engine with one hand, take a leisurely stroll, and look like you still have spare energy, and even the whole process doesn't sweat much!Is he a monster?
It's just a lot of strength.Those with well-developed limbs must have simple minds.Processing and polishing the engine is not a very difficult thing, it is a low-level job, and I don't even bother to do it!

Yang Rongyi was a little bit stuck, and took a cast crankshaft blank from the shelf, and walked towards Feng Hao: "If you have the ability to process more precise parts, such as a crankshaft!"

If the engine is the heart of the car, then the crankshaft is the heart of the engine and the most important component.It bears the force transmitted by the connecting rod and converts it into torque through the crankshaft output and drives other accessories on the engine to work.

The crankshaft is subjected to the joint action of the centrifugal force of the rotating mass, the periodically changing gas inertial force and the reciprocating inertial force, so that the crankshaft is subjected to the bending torsional load.Therefore, the crankshaft is required to have sufficient strength and rigidity, and the surface of the journal needs to be wear-resistant, work evenly, and have good balance.

Crankshaft processing uses advanced equipment such as CNC lathes, CNC internal milling machines, and CNC lathes to perform CNC turning, internal milling, and turning broaching on the main journal and connecting rod journal.

Similarly, the crankshaft processing relies on imported high-precision equipment. With the design provided by Feng Hao, there is currently no supporting equipment, so it can only be processed by excellent lathe workers.

"If you can process the crankshaft, I will be convinced!" Yang Rongyi provocatively said, "If..."

However, before he could say yes, Feng Hao turned his eyebrows coldly at him, and his eyes made him shudder, his scalp numb, as if he had met the king of beasts, and he was too scared to speak.

"Gao Weiguo, I said that this is not an example, so our cooperation ends here!" Feng Hao put down these words, turned around and left without even giving Gao Weiguo a chance to stop him!
Gao Weiguo looked up to the sky and sighed, his heart was ashamed.

At this moment, he even had the thought of killing Yang Rongyi.In the words of my daughter, if you are not afraid of godly opponents, you are afraid of pig teammates.Why did I work so hard to quit business and go into politics?Isn't it just for domestic cars to be among the top in the world?Looking forward to the stars and looking forward to the moon, the hope that I finally looked forward to was ruined by you!
However, Yang Rongyi didn't know it, and shouted from the air: "Playing hard to get! The No.36 skill of 16 tricks! I didn't expect that your employees from foreign companies are so good at learning."

Feng Hao, who had already walked out of the workshop gate, stopped and looked at the arrogant Yang Rongyi.Ridiculous again and again, even the clay bodhisattva is also a little bit angry.

"Jarvis, delete all technical documents and drawings, not one left!"

After giving this order, Feng Hao went straight to Yang Rongyi, raised his hand, and the speed drove a fierce wind, piercing He Xianren's eyes, sore and even tears.

"What are you doing?" He Xianren stepped back three steps, rubbed his eyes, and then recovered. "I got it right? Angry?"

"Bring it."

"Take what?"

"Crankshaft blank."

"Stop, stop!" He Xianren recalled the strange force of picking up the engine with one hand, fearing that Feng Hao would violently hit someone, he quickly stopped him, called the apprentice, asked the apprentice to hand over the crankshaft blank to Feng Hao, and stood far away by himself Far away, I am afraid of being beaten.

Feng Hao smiled after receiving the blank crankshaft.But in the eyes of the apprentice, it was a little creepy, and he ran away in fright.

Some people just don't clean up!Proper despair should be given to the conceited!
　Now it is the 11th place, and there is only one place left to be on the homepage, please support!In addition, this book is a cool article, don't think it is not a cool article just because of a chapter, the foreshadowing is for the climax.The next chapter is the plot line of the daughter, please be patient.The plot is interlocking, advancing layer by layer, and foreshadowing each other.

　　
　
(End of this chapter)