Big Country Intelligent Manufacturing

At the hint of Xu Zhenming, Zheng Cheng used the keyboard to input the shortcut keys while operating with the mouse to enlarge the drawing of the air duct system and gradually display the drawings of each part.

"Mr. Xu, colleagues! After the last collective review of the drawings, I optimized the piping system again. The reduced pipe diameter was reduced to the best size, and the straightened position has been straightened. The technical parameters of the drawings should be no problem. , The technical requirements for pipe production have increased a lot! The technical level of our company’s workers may be difficult to make this type of pipe..."

At this time, Zheng Cheng was explaining the drawings, and at the same time, he raised his concerns about pipeline production and installation.

To modify the drawing and expand the tolerance range, he was not sure, so he had to come up with the most accurate drawing.In this way, it is indeed a difficult problem how to turn the drawings into real objects.

If this kind of problem is put in a foreign company, it is not a problem.The precision requirements of their products may be higher than those of Zhengcheng's drawings.However, they have many supporting equipment that can complete the accuracy required in the drawings, which is much more advanced than the domestic workers' experience to control the accuracy.

"Minister Zheng! The accuracy requirements of your pipeline are indeed a bit high, and there is no construction team that can win this project in Nan'an area!"

"The riveters and master welders from the Jiujiang Shipyard are here to do the work, I'm afraid they can't handle it!"

"If you change it again, just change the accuracy error to millimeter level!"

At this time, the technicians in the conference room all spoke, rushing forward their opinions.

In general, they all have only one opinion, which is to change the drawings and lower the accuracy requirements.

Seeing this scene, Xu Zhenming knocked on the conference table with his index finger, and said with a serious expression: "Everyone, be quiet! We will not discuss how to make it. Minister Zheng, do you have any questions? No problem, let’s continue to review. Picture!"

According to Xu Zhenming, this set of drawings cannot be changed.How to make products and how to turn drawings into real objects should be overcome by the manufacturing team led by Sun Ziliang.If the manufacturing and construction tasks are completed by modifying the drawings, the manufacturing team of Yiming will never make progress!

Zheng Cheng is responsible for very few drawings. In addition to indoor air ducts, drawings of system equipment such as outdoor fan units, compressed air storage bags, air purification devices and exhaust purification devices.Many equipments are purchased from outside, so there is no technical difficulty.

Therefore, he reviewed this part of the drawings very quickly, and no major problems were found.Xu Zhenming solicited everyone's opinions and saw that everyone agreed that there was nothing wrong with this drawing, so he finalized this set of air duct drawings.

The next drawings to be reviewed are the construction drawings of the spray booth and the paint booth.This set of drawings has been revised and designed according to Xu Zhenming's ideas. It is simple and practical. The construction and production must be matched with the pipeline system. The draft will be finalized soon and the final drawing number version will be determined.

Sun Chao is responsible for the suspension system, and Xu Zhenming is responsible for the robot drawings and control electrical drawings. They have gone through several rounds of technical discussions, and basically no problems have been found.

In this way, it took more than two hours, and the drawings of this automatic spray paint and baking paint production line have been collectively reviewed and approved.The following work is to make and construct according to drawings, strive to complete the construction process within one month, and enter the link of debugging and trial production.

Zheng Cheng was appointed by Xu Zhenming as the leader of the automatic spray paint and baking paint production line project team, responsible for the later construction of this production line.

Soon, Xu Zhenming announced at the meeting: "Colleagues! The company decided to develop servo motors, drum-type computer embroidery machines, automatic rectangular tube blanking, drilling, punching production lines, computer engraving machines and computer cutting machines. Therefore, our colleagues in the technical department have a very heavy task, and they need to readjust their work!"

After the Spring Festival, Xu Zhenming decided to use the power of the company's technical department to engage in product development, instead of working alone alone.

At the meeting, he set up a servo motor project team on the spot, with Meng Haisheng as the team leader and Qin Jinshui as the deputy team leader, leading two young technicians to work together.

Sun Chao is the person in charge of the roller-type computerized embroidery machine, computer engraving machine, and computer cutting machine, and leads six or seven technicians in charge of mechanical design.These products are all derivative products of Yiming's main product CNC machine tools. It is more appropriate to put them together for research.

As for the fully automatic rectangular tube blanking, drilling and punching production line, it is actually an intelligent professional machine tool.This kind of equipment is currently only available in China, Germany and Japan and used in the automobile manufacturing industry.A piece of equipment is worth more than 20 million yuan.

This kind of machine is more than 80 meters long, and it can automatically feed various types of rectangular tubes to the head of the machine through the conveyor belt and roller table.

Through the centering device, the angle and direction of the rectangular tube can be adjusted; the rectangular tube can be drilled through the hydraulic punching die; the rectangular tube can be drilled through the matching twist drill and milling cutter; the rectangular tube can be turned over through the clamping device; The electric saw can cut off the rectangular tube according to the numerically programmed data...

In short, this equipment is very advanced, and only two operators are required for a production line.The entire production line is controlled by the data set by numerical control programming, and the work efficiency is very high. One line can be equivalent to the production volume of a blanking workshop.With a production line like this, Yiming only needs two to meet current production needs!

Xu Zhenming has used this kind of equipment imported from the country.Through installation and debugging and maintenance, he has a set of similar drawings and materials in his memory.And now, with the drawings and materials he took out, Moguo Ren has not developed similar products at this time.

In other words: Yiming's master map should be the most advanced nowadays, and there is no comparable product in the world!

He originally planned to hand over the tackling of this project to Gao Jianjun, and it was most appropriate.However, this old man has not retired yet.Therefore, he decided to temporarily hand over to the new supervisor Qin Jinshui, this is also no way!

"I will set up a special drawing catalog for the conceptual drawings and materials of the rectangular tube automatic blanking, drilling, and punching production line. This catalog can only be accessed by Qin Gong through a password. Qin is in charge of this for me temporarily Project, report the progress of the project directly to me!"

Thinking of this, Xu Zhenming announced his decision at the meeting.

"Okay, okay Mr. Xu! I, I will definitely learn computer operations in a short time, and I promise to complete your R&D tasks!"

The chunky old man Qin Jinshui was a little excited, talking hurriedly.

He did not expect that he would be reused on the first day when he came to Yiming, and he was responsible for the research and development of two projects.

This is the case for technical engineers, who are happy when they have R&D tasks.He has no passion for doing nothing.Over time, he will get bored of his work.

The work has been arranged and the meeting has come to an end.

Xu Zhenming looked at his watch and saw that it was still early, so he left the Zhengcheng project team and prepared to arrange a technical confession meeting.He picked up the phone and called Sun Ziliang, who was in charge of production, and asked Sun Ziliang to come to the conference room on the third floor for a meeting.

The technicians who had nothing to do with the automatic paint spraying production line project scattered and left, ready to work on their own design tasks.Not long after, Sun Ziliang hurriedly walked into the conference room.Then came Gao Jianjun and a master in the production department.

Gao Jianjun will retire in half a year.

Before his retirement, he wanted to successfully tackle the key problems in the localization of finishing rolls at the China Plate Plant.This old man was very serious, so he spent the whole day in Yiming's production workshop, urging Yiming to provide him with finishing roll repair and trial production services for new finishing rolls in accordance with the contract.

The more Gao Jianjun was like this, the more Xu Zhenming respected him instead of treating him as an outsider, and he didn't think he was bothersome.

"Elder Gao is here too! It happens to help us as a staff officer too!" Seeing Gao Jianjun coming, Xu Zhenming gave him a cigarette with a smile.

Seeing the boss taking the lead in smoking, more than a dozen cigarettes were lit in the meeting room, and all the participants began to vomit.After a while, a layer of blue smoke appeared on the roof of the conference room.

"Mr. Sun, Mr. Gao! We have encountered a difficult problem with regard to the production of the automatic spray paint and baking paint production line! The requirements of the drawings are like this..."

After everyone is over smoking, Zheng Cheng has opened the drawings of the air ducts he designed to explain the technical requirements to Sun Ziliang and others.

"Who designed this pipeline drawing? Damn it!"

Before Gao Jianjun finished reading the drawings, he fired the cannon directly.

He has rich experience, has seen various pipeline drawings in Nan'an Iron and Steel Group Company, and has presided over various pipeline installation and overhaul projects.Seeing that Zheng Cheng's design drawings were so demanding, the old man went wild on the spot, and pointed out the flaws in the drawings without mercy.

Everyone was surprised when they saw Old Man Gao's sudden madness. They blinked and looked at Gao Jianjun, thinking: "What is this Old Man doing? How come here to point fingers?"

Zheng Cheng was very depressed at this time, sitting there blushing, holding fire in his heart, but it was not easy to attack.His cheeks were flushed, and his hand holding the mouse trembled slightly.

Seeing this situation, Xu Zhenming smiled and said: "Old man! Let's not discuss who designed this drawing. It is unreasonable! Does this kind of technology require us to complete it in China?"

Xu Zhenming's implication: Our person in charge of construction does not discuss the rationality of the drawings, but only discusses whether the product can be manufactured according to the original drawing and the installation is successful, as long as the technical parameters meet the requirements of the drawing.

On this point, he does not agree with the current domestic atmosphere!

Some construction units always ask the design unit to modify the drawings instead of thinking about how to improve their production level and construction level.This situation often happens more than ten or two decades later, and high-precision project construction has to be completed by foreign investors.

This unthinking spirit is not allowed by Yiming.

Xu Zhenming would definitely not agree!