Big Country Intelligent Manufacturing

After Xu Zhenming left, Wang Zhizhong and others breathed a sigh of relief.

Working under the eyes of the boss, they are still quite nervous.The problem of mentality is solved, but the problem of mechanical failure has not really been solved.

At this time, Xiao Song, the technician in charge of mechanical technology, was sweating.He was holding his notebook, biting the cap of the pen, thinking about the problem."What the hell is going wrong?" he said to himself.

"Song Gong! It's really impossible. Let's disassemble and reassemble the joint mechanism again. There are only a few accessories in total. I still don't believe that the problem can't be found!" At this time, an old assembly fitter said his own. opinion.

Although this method is a bit stupid, you can carefully check the accuracy of each accessory.This is no alternative!

Upon hearing these words, the technician in charge Xiao Song nodded involuntarily.

Ever since, everybody hurriedly disassembled the joint mechanisms of the automatic painting manipulator one by one, ready to take a closer look.When the joint bearing was pulled out of the joint mechanism, they found a small debris falling out of the joint mechanism.

"Found it! It turned out that this guy was messing around!"

"Haha... Such a small thing can affect the performance of the joint mechanism!"

"Who installed this joint bearing? Isn't it harming people?"

After discovering this problem, the workers shouted in excitement.

At the same time, they also know the reusability of assembly work.A very inconspicuous small debris can have such a bad effect, and it must be blown out with an air pump in advance during assembly.

Immediately, they all smiled and prepared to install the joint bearings back.

"This joint bearing can no longer be used and should be scrapped immediately!"

The technician in charge, Xiao Song, did not agree to this, and demanded that a new bearing be replaced immediately.He recorded the cause of the failure and the troubleshooting process in his notebook, and prepared to introduce his experience to everyone at the next project meeting!

"Song Gong! Why do you want to replace the joint bearing?"

"Spherical joint bearings are imported goods, the price is very expensive!"

"I heard that the quality of SKF bearings is very good, shouldn't they be damaged?"

The workers were a little skeptical about Xiao Song's order, and they all put forward their own opinions.

These people do not know that compared to this automatic painting manipulator, the articulated bearing is the most important.Once this part fails, the performance of the entire automatic painting robot will be affected.The automatic painting robot is not working properly, can it still be called an automatic painting robot?

"You perform according to my requirements, and I will bear all the responsibilities!" Thinking of this, Xiao Song made a final decision and insisted on replacing the joint bearings that might be worn out.

Wang Zhizhong, who was assisting in debugging, also grinned when he saw this, showing his yellow front teeth.He smiled and warned everyone: "We, Mr. Xu, have strict quality requirements! This joint bearing has failed just now, we should replace it immediately, don't hesitate!"

As soon as they heard Xu Zhenming's name, the workers at the scene felt reflexive.They didn't say anything, and they were ready to pick, butter, and reassemble a new joint bearing immediately.

Not long after, this automatic painting manipulator was successfully assembled again with everyone's efforts.Wang Zhizhong knocked on the control program run button and began to check the operation of the automatic painting manipulator.

After the first command is executed, the condition of the automatic spraying manipulator is normal!

The same is true for the second time!The third time is still no problem!

"Oh! It worked! Haha..."

"Now we should be able to give Mr. Xu a satisfactory explanation!"

"Cut! Xu is always the inventor, he must have known what went wrong. He is testing us!"

After the workers saw this situation, they were all talking about it.

"Song Gong! I set up an infinite loop program to let the automatic painting robot run continuously for 48 hours for aging test!"

Seeing that everything was normal, Wang Zhizhong set up the procedure and explained some details to Xiao Song.

This kind of aging test is the practice of Yiming Company. First, let the automatic paint spraying manipulator run without load and aging for 48 hours, and then bring the paint pump to continue aging for 48 hours.

Only after working continuously for four days and four nights, if the automatic painting robot is okay, it will be considered preliminary!

These are the process parameters proposed by Xu Zhenming on the technical drawings of the automatic painting and baking production line. Wang Zhizhong, Song Gong and others must debug the automatic painting robot according to the technical requirements!

After taking over Wang Zhizhong's explanation, Xiao Song nodded and said yes with a relaxed expression.

Wang Zhizhong tidied up and went directly to Xu Zhenming's office, ready to report the debugging process to Xu Zhenming.

At this time, there were two people sitting in Xu Zhenming's office, one was Hong Aiguo and the other was Sun Chao.

Sun Chao is in charge of tumbler computer embroidery machines, and Hong Aiguo is the person in charge of CNC machine tools.Both of them were summoned by Xu Zhenming at the same time, and Yiming's company must have a new move.

"Mr. Xu! You're busy, I'll report on my work later!" Looking at the few people at the small conference table, Wang Zhizhong hurriedly said hello and was about to leave here.

At this time, Xu Zhenming smiled and beckoned to him: "Wang Gong! You also come to our meeting! You are engaged in automatic control, and all projects cannot do without you!"

Ever since, Wang Zhizhong joined the meeting with a smile.

During this period of time, he and his lover Xiao Yang have made good progress, so he laughed all day, walking with wind.

"Everyone! According to the market research report of the sales department, I think the computerized embroidery machine will be saturated at the end of this year or early next year. Once that happens, our life will be difficult! At present, our company has There are more than 1,300 employees, and the salary alone requires more than one million yuan per month..."

After Wang Zhizhong sat down, Xu Zhenming explained the company's current economic situation again.He believes that the company should immediately develop and finalize new intelligent equipment to find new profit growth points for the company.

Among these intelligent equipment, the development cycle of CNC machine tools is relatively long, and the same is true for servo motors.Only computer engraving machines and computer cutting machines have test prototypes as the basis, and the equipment is quickly finalized and the market potential is large, which is the most current work focus.

The main applications of computer cutting machines are domestic advertising, small commodities and decorative parts production industries.With the rapid economic development, these industries are also developing rapidly, and the demand for computer cutting machines will increase sharply.

The computer cutting machine is currently not produced by a domestic manufacturer. The market is all imported products, which are promoted by agents engaged in computer trading.

Once Yiming Company introduces the inexpensive and high-quality computer cutting machine to the market, it can fill the domestic gap; secondly, it can squeeze the living space of foreign brand products and create considerable profits for Yiming Company.

Therefore, this kind of high value-added intelligent equipment is ready to make a head start!

Relatively speaking, computer engraving machines are even more profitable.This product is a simplified version of the machining center, the accuracy is slightly lower than the four-axis machining center, but the cost is also low.Self-employed people engaged in small mold manufacturing like this product the most, and can be used as Yiming's main product in the next two to three years.

After some rational analysis, Wang Zhizhong, Hong Aiguo and Sun Chao were shocked by Xu Zhenming's wonderful theory.Only now did he know that his boss had so many twists and turns in developing new products!

There are many people who know technology, but not many people who are proficient in marketing.It turns out that there is a reason why Yiming Company can develop in a straight line!

Today, these people know why Yiming's development is so smooth."Mr Xu turned out to be a master of market planning!" They all thought, looking admiringly at Xu Zhenming who was talking about the money.

And they didn't know that Xu Zhenming actually came with rebirth memories and had some understanding of the market in the next few years.He is looking at the world on the shoulders of historical giants, and his eyes are naturally much longer.

"I decided to make some adjustments: Hong Gong and Wang Gong immediately took over the research and development of the computer engraving machine, finalizing the computer engraving machine as soon as possible, preparing for the production of promotional color pages and applying for invention patents; Assistant Sun and Wang Gong partnered to complete the drum computer After the development of the embroidery machine, immediately prepare the model of the computer cutting machine..."

At this time, Xu Zhenming began to announce the task of adjusting the R&D team organization of the Technical Department.Of course, he will also participate in each product R&D project team to provide everyone with technical support such as R&D ideas and original mother map materials.

After speaking, he took his laptop, opened the drawings of the computer cutting machine and computer engraving machine that he copied from his memory, and let everyone browse it roughly.

These drawings require major revisions. Some parts that cannot be manufactured are replaced and replaced with parts that are currently available on the market.

Regarding the core processor of the control system, Xu Zhenming insisted on replacing it with a computer version of a multi-core single-chip microcomputer.He knew the development trend of PLC. Until he was reborn, the domestic PLC market was still dominated by foreign products.

Relatively speaking, although the application development of single-chip microcomputer is more complicated, the efficiency is lower.However, Yiming will be able to involve in chip manufacturing in this area in the future.This layout must be well thought out in advance, and you can't catch the blind when there is a situation in the supply chain!

Xu Zhenming didn't make it clear to the engineers present about the layout in this regard.They can't understand it.He just issued an order to let everyone follow the order to execute the direction and steps of the research and development.

After finishing these tasks, he copied the drawings from his computer into the company's server, and granted access permissions for Hong Aiguo, Sun Chao, Wang Zhizhong and others.

"Mr. Xu! I will immediately adjust the direction of work and do a good job in the development and finalization of the computer engraving machine!"

"The research and development and finalization of the computer cutting machine, our project team will not hinder the company!"

After Xu Zhenming's mobilization, Hong Aiguo, Sun Chao and others flushed with excitement, and slapped their chests.They are all like chicken blood, full of energy, ready to immediately start the project they are responsible for.

Develop a product and create the rise of an enterprise.This pattern is a bit taller, and it is Xu Zhenming's ecstasy soup poured on them.

In addition, there are huge rewards ahead, and these people will naturally be so excited!