Big Country Intelligent Manufacturing

Among the three, Xu Zhenming didn't like to listen to the feedback from Sister Song.The relatives of those leaders plan to buy a villa specially prepared by Yiming Group for the expert team. Why?How old are they?

Thinking of this, Xu Zhenming told Sister Song with a cold smile: "If these people consult you about this kind of thing in the future, you have to be harder to speak and just go back. What are they like? They dare to occupy our Yiming Group. Is the company cheap?"

"This...I'm afraid this is a bit bad!" Sister Han persuaded Xu Zhenming not to offend people too much.Although Yiming Group is in full swing now, it can't offend everyone.

But Xu Zhenming did not agree with her opinion.He told the three people present, "Those people will get better! Besides, when the leaders change from one crop to another, when do I want to hold them? Don't worry, as the strength of Yiming Group increases, no one will I dare not do anything to us!"

Having said this, Xu Zhenming arranged tasks for Sister Song and Tian Wandong: “The headquarters building plan, R&D building plan, and standard office building plan in the headquarters compound must be started immediately! You are ready to report the project immediately and run the project construction Three kinds of certificates, strive to start construction after the Spring Festival in 1996!"

"Mr. Xu! According to your plan, these three buildings will invest more than 700 million yuan. Can our group company's funds next year be able to eat up?"

"Mr. Han is right! On the Jingshi side, the Gaoshi Software Center will also invest more than 700 million yuan next year. The projects on both sides will start at the same time, and the funds of our group company are a little nervous!"

Sister Han, Sister Song, and Tian Wandong were not at ease with Xu Zhenming's investment plan, and advised Xu Zhenming not to take too much strides.

But Xu Zhenming smiled and shook his head, "Our group company's sales will be better next year, and annual sales will definitely exceed 10 billion yuan. With sufficient working capital as a guarantee, what is the relationship between investing in these industries?"

Xu Zhenming did not disclose which products will be put on the market next year, and he is inconvenient to disclose, nor can he disclose, products related to the 1464 project.After explaining this, he announced the adjournment of the meeting so that everyone could go to their own work.

Subsequently, Xu Zhenming asked Hu Chunmei to issue a notice, preparing to hold the Yiming Group’s chip production line research and development plan and silicon wafer production line research and development plan in the meeting room on the first floor of the research and development building tomorrow morning.

In the early morning of the second day, Wanninggu, who was in charge of the silicon wafer project, Hu Mingzhen and Lin Zhengxue, who was in charge of the chip production line, Guo Liansheng, who was in charge of chip inspection equipment, and Hong Aiguo, Gao Jianjun, and Wang Zhizhong who were in charge of CNC machine tools, all came to the research and development. Conference room on the first floor of the building.

They have all been notified to prepare the PPT files for the meeting in advance, and prepare to report the situation while projecting the content to be reported on the big screen.

Around 7:30 in the morning, Xu Zhenming entered the meeting room on time.He asked his secretary Hu Chunmei to preside over the meeting on his behalf, preparing to exercise Hu Chunmei's ability.

"Everyone! Yesterday morning, Mr. Xu personally went to the Mingxin Manufacturing Company's construction site to check the situation, and was determined to start research and development of the chip production line. The reverse mapping and manufacturing of the 0.8-micron chip production line equipment is only the first step! Next, please team leader Hu. Explain your plan in detail!"

Hu Chunmei spoke in a trembling voice, barely able to finish the opening remarks.She was so flustered, her cheeks had a slight fever, and she dared not look at others.

"Everyone! The plan of our project team is like this. The first step is to prepare a variety of spare parts for the 0.8 micron chip production line. For example, various types of bolts and nuts, support structures, machine transmission parts, etc.! I don't know our production Can the department keep up?"

While Hu Chunmei was still in a panic, Hu Mingzhen had already asked the first question.

He told everyone that these spare parts for foreigners seemed very simple, but the requirements were very high.For example, foreigners can use 45 steel to make very strong bolts, can it be done in China?

"Don't worry about this! In terms of machinery manufacturing, our Yiming Group is no worse than anyone! The material heat treatment process is not good, and we will replace it with alloy steel!" Hong Aiguo is Xu Zhenming's deputy to the production department. The person in charge of the general level has just taken over the job of Sun Ziliang.

He told Hu Mingzhen, Lin Zhengxue and others that as long as the spare parts for machinery manufacturing and equipment processing, Yiming Group can solve all the problems.

All the equipment on the chip production line has something to do with mechanical manufacturing.For example, chemical and mechanical surface treatment, wafer polishing machine tools... etc. These equipment are smart machines.It is a piece of cake for Yiming Group to manufacture intelligent machinery in the late 1980s and early 1990s.

"Okay! Since there is no problem with Mr. Hong, the most important thing is the lithography machine. The 0.8 micron light source system, we have to import it from Philips; can we achieve the accuracy of other complete machine systems?"

Hu Mingzhen asked another question.

The 0.8 micron-0.25 micron lithography machine belongs to the first generation lithography machine.There are two forms, one is contact lithography machine, and the other is proximity lithography machine.

This lithography machine of Yiming Group Company is a product of ASML Company in the Netherlands. It belongs to a contact lithography machine and requires particularly high mechanical performance of the whole system.For example, equipment shock absorption system, equipment alignment progress, resolution, etc.

"The accuracy of the complete system of the lithography machine is higher than that of a 5-axis CNC machine tool. Can we do it?"

Hu Mingzhen was afraid that everyone would not understand, so he introduced the principle of the lithography machine carefully.

To put it bluntly, a lithography machine is a kind of CAM equipment that engraves the circuit layout onto a silicon wafer.The purple light source of the mercury lamp is the carving knife to carve out the integrated circuit.

Therefore, countries with poor mechanical manufacturing capabilities simply cannot produce high-precision lithography machines.

This issue is also a big challenge for Yiming Group.The five-axis linkage CNC machine tool project has not been able to come out. It is not that difficult to make this 0.8 micron lithography machine.

After listening to Hu Mingzhen’s introduction, the meeting room suddenly became quiet.The lithography machine is a combined intelligent machine tool production line that integrates several systems, and no problem occurs in any link.

Seeing this situation, Xu Zhenming had to come forward to make a decision.

"Leader Hu's team is responsible for the light source system of the lithography machine; Mr. Hong's team is responsible for the body system of the lithography machine; Wang Zhizhong's team is responsible for the automatic control system! You three teams work together to develop a 0.8 micron lithography machine!"

Xu Zhenming announced the establishment of a project team in the conference room, first to overcome the 0.8 micron lithography machine project, and then began to develop 0.6 micron, 0.35 micron lithography machine.These three models of lithography machines belong to the category of the first generation of lithography machines. Xu Zhenming decided to choose contact lithography machines as the main research direction.

"Although this kind of lithography machine consumes a lot of masks, it is the easiest for us to get it! Our group company's technical strength is weak and can only be overcome from the simplest technical points!" Xu Zhenming smiled and explained that he set up such a project. the reason.

He announced at the meeting: Yiming Group Company is not afraid of investment, nor will it reduce the R&D funds of lithography machines, and is willing to invest heavily in burning money.

"Mr. Xu! As long as the funds are sufficient, our team will definitely be able to win this project!" Hu Mingzhen said on behalf of the project team members of the lithography machine project.

Fortunately, Xu Zhenming's requirements are not high, and the difficulty is not hell level without starting with the 0.6 micron lithography machine.

Hu Mingzhen then arranged research and development tasks such as etching machine, wet cleaning, rapid annealing, ion implantation...etc.Gao Jianjun's technical team also joined the team to undertake part of the research and development work.

Until now, the R&D task of the 0.8-micron chip production line has been arranged.

After participating in the discussion of this process, Xu Zhenming really knew why the level of domestic chip manufacturing was so backward.

"We have never really developed a complete chip production line ourselves, and we have no technical reserves. We have always been buying and buying, how can we keep up with others?" He couldn't help feeling that his responsibility was heavy.

At this time, Xu Zhenming did not, like another keyboard man in time and space, either screamed about himself against his motherland; or screamed, boasting a little bit of achievement to become the world's first.

"Any kind of production technology needs accumulation, and it needs to do basic work steadily! Since the lithography machine is so difficult, let us Yiming Group to take this mountain!"

At the end, Xu Zhenming cheered up the members of the chip R&D production line team!

"Yes!" Hu Mingzhen took the lead and applauded, and there was a wave of applause in the meeting room.

At this time, Gui Changshu, who was about to come to Xu Zhenming to discuss matters, was attracted by the applause in the conference room and couldn't help but push the door in.He came to Xu Zhenming's side and smiled and asked what happened to Xu Zhenming.

Xu Zhenming told him about the situation of the meeting.

The old man couldn’t help but sighed with emotion. “Our country used to have a wireless factory in the south and 878 factory in the north. But all the chip production lines are imported second-hand goods. We have never developed a chip ourselves. Production line. Even the chip production line of foreigners has not really reached production!"

Gui Changshu believes that Xu Zhenming is more ambitious and is willing to do such a large investment in project research and development.

He immediately stated at the meeting: "I will immediately report your situation to the leaders of the headquarters, and the leaders of the headquarters will also support your project and give some support."

In fact, the headquarter leaders have always paid more attention to the chip industry.The investment was relatively large but did not yield any results. Xu Zhenming did not know why.

Moreover, he seems to have heard a "Hanxin No. 1" joke, the country spent more than 100 million yuan on this project.

If this billion is given to Yiming Group, let alone a 0.8-micron lithography machine, or a 0.6-micron lithography machine, Xu Zhenming can dare to slap his chest to ensure that he can get it out.

"Thanks to Team Leader Gui for your support! According to our plan, we will produce a transcript that satisfies the headquarter leaders in one year!"

After thinking about it, Xu Zhenming decided to raise the flag again and make military orders on behalf of his colleagues.

With this military order, everyone should do their best.