Big Country Intelligent Manufacturing

"You don't need to do this!" Xu Zhenming hesitated, or denied Yang Daxia's proposal on the spot.

In his opinion, Yiming Group's current stall is relatively large, and the more intense the performance, the more it will attract the attention of other interested people.

Mindful of this, he commanded Li Dayan and Yang Daxia with a serious expression to tighten outside and inside, and quietly strengthen the safety of Yiming Group.

"Jingshi is working on the Xuanniao 97 operating system, and almost all of the software projects of the group companies are there. You should pay attention to it. The headquarters is more important. The national and world-class cutting-edge projects are here, let alone any. The mistake."

Xu Zhenming looked at Li Dayan with deep gaze, asking him to immediately strengthen the security forces and make preparations in detail.When conditions permit, you can properly probe those strangers.

"Yes!"

Li Dayan and Yang Daxia stood up solemnly, ready to immediately convene an internal meeting of the Ministry of Security to implement the boss's instructions.

Both of them are Xu Zhenming's confidants, and they know the cutting-edge technology projects that the group company is currently engaged in.These project technologies will definitely attract the coveting of some interested people and have to act cautiously.

"Dingling..." At this moment, Xu Zhenming's cell phone rang suddenly, and the call was from Hu Mingzhen.

Hu Mingzhen told Xu Zhenming on the phone that the commissioning of the first semi-domestic lithography machine was smooth, and it has passed the no-load test and lithography simulation test.The following process is to do the tape-out test of the chip to verify the accuracy and performance of this lithography machine and the stability of the tape-out quality.

Hearing this, Xu Zhenming immediately picked up the phone on the desk and called the chip laboratory at the group headquarters, "Lao Zhou, you and Lao He and Lao Zhang will come to Mingxin Manufacturing Company immediately. There are important tasks here. ."

After hanging up the phone, Xu Zhenming waved to Li Dayan and Yang Daxia, "Go, let's go downstairs together." Then, the three of them walked out of the office building of Mingxin Manufacturing Company.

While walking on the road, Xu Zhenming discussed with Li Dayan: "I am going to let the technical experts of the chipset and electronics group develop a Skyeye system. In this way, your security department will do better in the future."

"What is the Sky Eye system?" Li Dayan was surprised.

Daxia Yang was even more dumbfounded. He could only pretend not to hear, and kept wondering, "The sky eye system? Is it the eyes installed in the sky? If our group company can cause this kind of clairvoyance, it would be fine?"

"The Sky Eye system is actually the monitoring system currently installed by our group company. But it is much more advanced. Hi, you can't understand it. In short, you know that this system can monitor all areas of the group company."

Xu Zhenming felt very tired to explain to Li Dayan about high-tech projects, so he didn't continue.

When the three of them came to the gate of Mingxin Manufacturing Company's compound, Zhang Guoli, He Changlin and Zhou Jiawei took a car and drove into the compound.

"Stop the car, master driver." Zhou Jiawei's eyes were very sharp. He first saw Xu Zhenming and asked the driver who was in charge of driving to get off the car.

As the director of the lab-on-a-chip, he had to be the first to report to his boss and ask the boss for his arrangements."Xu Dong, what task do you have for us?" After that, Zhou Jiawei helped the brown glasses frame on the bridge of his nose.

Immediately afterwards, He Changlin, who was in charge of embedded chip design, and Zhang Guoli, who was in charge of mobile phone chip design, followed by pulling the door and stepping out of the car.They stretched their waists and looked at the compound of Mingxin Manufacturing Company.

"It hasn't been for a while, the changes in the compound of Mingxin Manufacturing Company are not small."

"Yes, if I didn't observe it specifically, I couldn't even feel the leaves on the trees falling out."

He Changlin and Zhang Guoli expressed their feelings.They have a heavy R&D task, and they often work overtime until late at night, so they can't pay attention to the changes in the outdoor scenery.

No, their task has come again.

"I asked the three of you to come here. There are two important things in total. One is to use PDA chips to tape out and test the performance of our own lithography machines; the other task is to develop a set of digital monitoring system chips. "

Xu Zhenming smiled at He Changlin who was feeling emotional.

Among the three, He Changlin was the oldest. If he were to be a company later, he would actually have reached the age of retreating to the second line.However, the reserve force of Yiming Group could not keep up, so Lao He still had to rush to the front line and use it as a backbone.

Xu Zhenming felt a little uneasy about this.

"PDA chip? We have just completed the physical circuit simulation experiment. The original plan was to tape out the film after the Spring Festival."

"Digital surveillance chip? This thing is too advanced, there is no market at all."

After hearing the tasks assigned by Xu Zhenming, Zhou Jiawei, He Changlin, and Zhang Guoli suddenly felt a little overwhelmed.The boss's task was so sudden that they caught them off guard.

"These two tasks must be planned immediately, and the sooner they are implemented, the better. Let's go to the lithography room of Factory No. 2 to have a look." However, Xu Zhenming did not give the three subordinates time to buffer, and directly pulled them towards Walked to the site of Hu Ming Town.

No. 2 workshop, lithography room.

The newly assembled lithography machine is running, and the alarm light on the machine shell is slowly rotating, and at the same time it emits a burst of alarm sounds.

At the same time, the laser head of this KrF lithography machine is doing lithography simulation experiments, emitting a dazzling light.

The third-generation lithography machine belongs to the proximity lithography process. The laser head does not need to be in contact with the mask, which has less pollution and high lithography accuracy.Even so, masks, photoresist, photolithography reagents, etc. are all expensive consumables.

Because of this, the Hu Mingzhen team must plan every experiment and reduce experiment costs.

Seeing Xu Zhenming coming with three chip design experts, Hu Mingzhen immediately walked up with a smile.

"Xu Dong, according to our test data model analysis, the KrF lithography machine we produced can be directly tested for tapeout."

He was very excited and wished to start the chip tapeout test today, and come up with the tapeout engineering experiment data as soon as possible.

Hearing this, Zhou Jiawei was so slow that he knew why the boss called him to come to this place.

"Xu Dong, the Suzaku Core I embedded chip we designed, I am afraid that this lithography machine cannot be used for tapeout testing." He explained a little panic.

"Why? Our domestic lithography machine is not bad at all in performance." Hearing this, Hu Mingzhen asked quickly, wanting to dispel Zhou Jiawei's concerns.

The domestic PDA chip that Zhou Jiawei is in charge of-Suzaku Core I chip, can be said to be an epoch-making product, the main frequency is more than 150MHz, stronger than the general Pentium chip.

Xu Zhenming is going to use this high-end chip to create a super PDA, bringing out the concept of a tablet in advance.

Therefore, the Foundry industry used to produce this Core I chip must be the most advanced at present.

In Zhou Jiawei's view, is the lithography machine in front of you capable?