I, the Black Technology Boss, Start the Anger Expert

But soon it was blown away.

After all, designing a chip is not that simple.

"Well, pick me up first."

"By the way, you can come in and take a look."

A smile appeared at the corner of Ye Kong's mouth.

"I'll go get it now."

The employee turned around and went to get his computer.

At this time, as Ye Kong walked in again, the rest of the staff hesitated for a while, and followed suit.

As soon as they walked in, their eyes widened, and their eyes were full of shock.

Because in this factory, there are all kinds of machines, big and small!

The factory building that used to cover a large area has now been completely filled up!

The glasses of everyone who saw this scene also widened.

So many machines!

And the shapes of all kinds of machines look strange, and I don't know what they are made of.

But at this time, one of them looked at the middle area.

Taking a closer look, in the middle area, you can clearly see a huge machine.

Around this machine, it is completely surrounded by transparent plastic plates, forming a closed space.

"This is……!?"

Looking at this machine, their faces could not hide their surprise.

And soon, they seemed to think of something, and the pupils in their eyes shrank slightly.

"Lithography."

Ye Kong said softly.

Lithography! ! !

The surrounding employees all exclaimed at this time.

Lithography!

This is actually a lithography machine!

Just now, some people were speculating in their hearts, could this be a lithography machine?

But just as soon as they thought about it, they shook their heads in their hearts. How could it be possible? Let alone a person like a lithography machine, even with the power of a country, it is not so easy to manufacture.

But now, Ye Kong told them, this is the lithography machine!

"Mr. Ye, the wafer is here."

At this time, Li Rui had already come over with the wafer.

As soon as he walked in, he saw everyone staring at the machine in the middle in the front.

And at this time, he also saw various machines placed in the entire factory.

There's an even bigger machine in the middle!

"Well, find a place to place it and apply photoresist?"

"Wait until I design a chip."

Before Ye Kong, he knew about the method of chip design.

For Ye Kong, who has the all-round talent, simply designing a chip is also a very simple matter.

And the main thing now is to try this lithography machine and see how it works.

At this time, when everyone looked closely, they could clearly see that Ye Kong was frantically designing chips under the computer he was manipulating.

The speed of this chip design is very fast, just like a phantom.

Everyone was a little dazzled when they saw this scene.

"nailed it."

"You can start putting the wafers in."

Ye Kong put on a set of dustproof clothes that had been prepared, and then began to put the wafer inside.

"Could this be... a lithography machine!?"

Li Rui, who had just come in, didn't know the situation. Looking at the scene in front of him, he suddenly remembered something and reacted immediately.

That's right!

It looks very similar to a lithography machine!

And Ye Kong's action, obviously, is to carry out lithography operation!

Looking at the side, there is also a huge machine there.

It's like... an etching machine!

Ye Kong had already placed the wafer in the lithography machine at this time.

Start the lithography machine, and irradiate it through the mask with the printed circuit through the ultraviolet light of the lithography machine.

The exposed part will be dissolved and removed to form the corresponding circuit structure on the crystal surface!

Seeing this scene, Ye Kong felt a little excited in his heart.

Although I already have the manufacturing knowledge about the lithography machine in my mind, it is still very exciting to actually manufacture this lithography machine.

The etching machine is relatively simple. Ye Kong directly searched for the information of Dao, integrated some of the technology of the lithography machine, and added his own all-round talent, and he came up with it directly.

"Etching.".

Chapter 12

The next step is to use an etching machine to etch.

The exposed silicon wafer is etched away using an etching machine.

And the photoresist on the silicon wafer is removed, and then the grooves are exposed.

Then ions are implanted to make the silicon have the characteristics of transistor switching, and then copper is used to connect the transistors.

Layer by layer, and then form an intricate chip structure.

But now it's fully automatic, just watch the machine operate.

"Manufactured successfully."

It didn't take long for a silicon wafer from which the chip was fabricated from different crystals to appear in front of everyone again.

On this silicon wafer, chips have already been fabricated.

Next, just cut, then bond the pins, and package as required.

"This...this is a chip!?"

When everyone saw this scene, their eyes widened.

After the process of the lithography machine and the etching machine just came down, the chip was soon completed.

Looking at the uncut chips on this large spar, their mouths opened slightly, as if they could fit an egg.

"Next, try cutting and packaging."

"Although it was just a random chip I designed, the efficacy is definitely poor, but it should work."

"Cut first, package."

"Look at it, next, you'll have to do it."

Ye Kong looked at Li Rui and the others next to him, and said lightly at this time.

"it is good!"

Li Rui and others also reacted at this time.

Especially Li Rui, there was also excitement in his heart at this time.

Make chips!

This scene in front of me looks so fantastic!

Makes you feel like you are in a dream.

But all of this happened for real.

Chip, chip made!

And this machine is Ye Kong, and in the past twenty days, all of them were created by one person!

The young man in front of him... is really a monster!

"Cut."

At this time, Ye Kong had already started cutting the chips on the wafer.

A single wafer can produce a very large number of chips.

Soon, as the wafer was cut, the discarded corner positions were removed, and the cutting chips came out one by one.

Assemble the pins, then package.

These series of processes, Ye Kong is like running clouds and flowing water, in just a short moment, it has been completely manufactured.

"I'll try to see if it works."

"it should be OK."

While Ye Kong made a sound, he directly dismantled his mobile phone.