In Wasteland Survival I have a Dyson Sphere

After the Xu Zhiwen brothers returned to the shelter, they immediately called on their family members to begin renovations on the outside of the shelter.

Their shelter itself is a civil defense facility, so concealment is still possible.

Then came the decoration of the door. I found a lot of clay and pasted it on the door.

Coupled with the color of the surrounding mountains, it can be well hidden.

As long as there are no locals to guide you, you will not be discovered at all.

After finishing everything, the brothers breathed a sigh of relief!

This civil defense facility of mine is relatively close to the city!

So as long as the other party's search scope expands, and if you don't make preparations, there is a high possibility that you will be discovered!

After completing all this, the Xu Zhiwen brothers set out again,

The place they headed to this time was a small town.

Previously, they had left a batch of supplies in the town, but due to the limited size of the van, they could not take them away.

This time they need to hurry back and bring back the supplies.

The two brothers drove all the way to the small town!

After arriving in the town, immediately came to the place where the supplies were stored.

When the supplies were loaded and driving away, his brother Xu Zhiwu saw the workshop in the distance!

"Brother, should we remind each other!"

Looking at the workshop pointed by his younger brother, his brother Xu Zhiwen thought for a moment and decided to remind him!

After approaching the workshop, I saw no vehicles parked here and knew that Lin Yu was not here now.

So I immediately took out my notebook, tore out a piece of paper, wrote what I found on it, and put it at the door!

After that, the two quickly got in the car and left, preparing to wait in the shelter for a while.

They had encountered such a team before, and they would not stay for too long before leaving.

So the two of them planned to hide for a while like before, to avoid it first!

——

On the other side, inside the shelter, Lin Yu was relying on the three-dimensional simulation technology of the basic manufacturing platform to simulate the electromagnetic gun.

Although my own materials and battery technology are not good, I can still make a few disposable electromagnetic rifles!

Or spend a lot of money to create a reusable electromagnetic weapon!

After conducting simulations, Lin Yu compared the advantages and disadvantages of the two options.

It was found that although the disposable electromagnetic gun is very convenient to launch and very difficult to manufacture, it wastes a lot of materials.

Because it is disposable and cannot be disassembled, it will be discarded directly after use.

The reusable ones are similar to ordinary firearms, with magazines installed for attack!

The advantage is that it can be reused without wasting resources. The disadvantage is that it is difficult to manufacture.

After thinking for a while, Lin Yu looked at the basic manufacturing platform, then patted his head,

"Thinking about it this way, the difficulty of manufacturing is not a problem for me!"

With a high-tech product like a manufacturing station, as long as you can design it yourself, you don’t have to worry about not being able to make it!

Lin Yu opened the three-dimensional projection of the manufacturing platform and redesigned the electromagnetic gun!

According to the previous reusable plan, Lin Yu carried out an optimized design!

Because of the battery and coil materials, Lin Yu designed this electromagnetic rifle to be very large!

Only in this way can the energy supply and power of the electromagnetic rifle be guaranteed!

After the design was completed, Lin Yu conducted a three-dimensional shooting simulation.

The calculated results also made Lin Yu very satisfied.

According to the current design, Lin Yu’s simulation test just now got the simulation results quickly.

One power supply can support 10 electromagnetic shots!

Each battery weighs one kilogram,

In order to ensure firepower, the electromagnetic gun uses an energy bin composed of two batteries, which can provide the energy required for 20 rounds of ammunition!

The magazine is also a matching design, with 20 steel needles inside as ammunition.

In order to facilitate replacement, Lin Yu integrated the magazine and energy bin into an integrated design, so that the magazine energy can be replaced with one replacement!

At the same time, the handheld electromagnetic gun has also been ergonomically designed so that Lin Yu can hold the gun body well when using it!

At the same time, the test just now also tested the power!

According to the data obtained from the simulation test, the initial velocity of the muzzle reached 1,200 meters per second.

Such a large initial velocity brings a longer range!

According to current calculations, within a range of 1,500 meters, there is basically no need to consider the issue of ballistic correction, basically hit wherever you want!

And this attack distance is enough for Lin Yu!

After determining the manufacturing plan, Lin Yu manufactured the entire gun body as a whole. In this way, the entire gun body can be printed out on the basic manufacturing station like 3D printing!

The magazine energy bin is manufactured separately.

And this magazine energy bin can also be reused.

So you can charge it after refilling the steel needle.

Lin Yu chose to make ten of these magazine energy bins, with 200 rounds of steel needles!

After all, the size and weight are not small, and ten of them are enough!

After putting the materials in, the basic manufacturing platform starts to manufacture automatically!

When Lin Yu returned to the smelting area and brought all the newly baked magnets to the manufacturing table, the electromagnetic gun and ten magazine energy bins were also completed!

At the same time, in order to replenish ammunition, Lin Yu also made a thousand steel needles as spare ammunition, and asked Shuyuan www.zhaｏshuyuan.com to take them to the stronghold together!

After seeing that the basic manufacturing bench was free, Lin Yu immediately started the coil manufacturing task!

After arranging the manufacturing tasks, Lin Yu had time to look at the electromagnetic gun that had just been released.

In order to cooperate with the electromagnetic gun, Lin Yu also made a four-fold sight before making the coil.

After installing the magazine energy compartment of the electromagnetic gun and adding a quadruple lens, Lin Yu couldn't put it down when he looked at the slightly sci-fi firearm in front of him!

Holding the gun, Lin Yu came outside the shelter, ready to test the gun!

Arriving at a small platform above the shelter, Lin Yu lay down on it, aiming his gun at the road in the distance!

The distance between the shelter and the road is about 200 meters, so we can initially test the performance of the electromagnetic gun.

Aiming at a half-broken dead tree on the other side of the road, Lin Yu took aim for a short time and then shot directly!

With a slight friction sound, a steel needle shot out at high speed!

The moment he pulled the trigger, Lin Yu saw a big hole punched out of the dead wood on the opposite side.

Lin Yu also made an estimate and found that the hole was about the size of a fist!

Seeing this effect, Lin Yu was also very happy,

This kind of injury is basically hopeless if it hits the human body.

Lin Yu then aimed at a boulder 800 meters away. After taking aim, he shot directly.

Also in an instant, the boulder was shattered.

A small steel needle, after applying enough kinetic energy, explodes with powerful energy.

After the gun test, Lin Yu also put away the electromagnetic rifle.

The next step is to fill up the truck with oil and then return to the base again to carry out other tasks!