Instant Noodles Millionaire

To

You can search for “Miaobi Pavilion (imiaobige.com), the richest man in instant noodles” on Baidu to find the latest chapter!

It was Great-Thousand Printing House who came to report later.

The Great-Thousand printing plant has no profit this year, but it is not because of poor management, but the Great-Thousand printing plant put all the money they made into a new technology development: 3D printing.

To be honest, the Great-Thousand printing factory can think of developing such a black technology, it is our Boss Jia’s pot.

At a high-level dinner last year, Director He of the Great-Thousand printing plant told Boss Jia that their printing plant did not know where the next technological change in the printing industry was and wanted to ask Boss Jia for advice.

But what does Boss Jia know about the direction of technological change in printing? You can ask him to draw a piece of paper. Printing is fine.

But Boss Jia can’t say nothing. Doesn’t it seem that Boss Jia is too incompetent, so he laughed and said, “The future direction of the printing industry may be 3D printing.”

Boss Jia originally said that 3D printing is one of the future directions of technological development, yes, but they have nothing to do with the printing industry.

But Director He, a technological madman, doesn’t think so. 3D printing is very high-tech at the first hearing, and it is a matter of the printing industry. So Director He immediately started asking Boss Jia about what is called 3D printing. .

Boss Jia doesn’t know much, so I simply explained it. First, use a computer to build a three-dimensional model of the item, then use some materials that can be rapidly prototyped to add layer by layer, and finally print one directly. The three-dimensional item comes out.

“Awesome, so that the printing industry will not be limited to paper or planes. We promise the industry, we can directly agree to the item. This is the breakthrough dimension of technological development!” Director He, a technical madman, cry on the spot out in surprise, and then ran back to the factory without finishing the meal.

Boss Jia felt that the other party was only a temporary interest, but didn’t expect that after three days, Director He came to our Boss Jia with a detailed 3D printing technology development plan.

In this plan, the Great-Thousand printing plant stated that they hope to complete the accumulation of technology and sample production within three years, and put the world’s first commercially available 3D printer into the market within five years. .

The Boss Jia who looked at this plan is a bit daunting. You must know that in history until 2020, although the technical concept of 3D printing is very hot, 3D printing itself is not very good.

Because the technical defects of 3D printing are very serious. First of all, because of the limitation of materials, the products produced by 3D printing are basically plastic products, so the limitations of the products are very large.

Secondly, the accuracy of 3D printing is not too high to make many very detailed things.

Also, 3D printing needs to be modeled. The more complex things are, the higher the cost of modeling. It is normal to toss a model for several months.

Finally, and the most important thing, to limit 3D printing is that the speed of 3D printing is very slow. For a big fist, a machine also needs to print a day. If it is a little bigger, That is another week or two.

In short, 3D printing may indeed be the development direction of the printing industry, but it is technically less practical than VR. It is basically a gimmick used to defraud money.

Of course, you can’t say that 3D printing is useless, maybe in another 10 years or so, a 3D printer will become a standard configuration for every family, and many times you don’t need to go shopping outside. , Use the computer to directly download a model diagram, and then use a 3D printer to print it out directly.

In short, the future of the 3D printer itself is boundless, but it takes time, and it takes at least 30 years to start. As a result, the Great-Thousand printing factory directly wanted to create a 3D printer within 5 years, which is really unreliable. .

So after seeing this plan, Boss Jia’s first reaction was to reject it, and then explained the difficulties and reasons for rejection to Director He in detail, expressing the hope for a more secure development method.

But Director He asked back, “We have now changed to a more secure direction for research. After a few years, foreigners will take the lead in obtaining technological breakthroughs and occupy the entire 3D printer market, what should we do?”

“If we don’t study, will the technology emerge by itself in several decades?”

“Who said that we can’t get a technological breakthrough in ten or even five years, what if it is done?”

Boss Jia was stunned by the director He. Well, since the Great-Thousand printing plant wants to start 3D printing, let them start it. Anyway, the profit of the Great-Thousand printing plant is for the Great-Thousand Group. In other words, it can’t be considered. Since they have this ambition, Boss Jia can’t stop it.

Furthermore, the director He is right, who said that there will be no results within ten years. After all, the world today is completely different from before.

Boss Jia agreed to Great-Thousand Printing’s 3D printing development plan, and then Great-Thousand printing began to go to great fanfare. Not to mention the profits of the entire 97 years, and the many funds accumulated before, they were all smashed. Entering this project, one year’s effort has spent 600 million Renminbi investment, which can be regarded as the company that is most willing to spend money among all branches of Great-Thousand.

As for the results, Director He said that their main task at present is to overcome the problem of printing materials, to create a material that is easy to melt, but after re-solidification, the strength is comparable to metal.

This is the most important material, apart from this, they also want to produce hundreds of printing materials with different characteristics, so that they can meet a product, a full range of material needs and so on.

Boss Jia was speechless for a while. The material is not the most important issue. The most important issue is the speed of promise. However, Great-Thousand printing has not yet started research. Boss Jia has all the money into the water. a feeling of.

If it hadn’t been for Boss Jia to ask an independent accounting firm to review the finances and find that there were no problems, and that all funds were indeed invested in scientific research, Boss Jia would even want to stop the project directly.

But after Boss Jia made hundreds of billions of dollars, it doesn’t matter. Let the Great-Thousand Printing Factory do it for yourself. Anyway, people use their own profits, as long as they don’t ask the company for money.

Wang Xuan actually came to ask the company for money, which is BiliBili.

In fact, if they don’t engage in systems, their profits are still very good. They have already made a good reputation in the entire professional software field, and they have begun to customize professional software for various companies all over the world, creating a total of 8,000 foreign exchange. Ten thousand dollars in profit.

Apart from this, they have even entered the general-purpose software market. BiliBili began to design and manufacture a CAD software, intending to break the market monopoly of the world’s industrial software manufacturers. This is really gratifying and a great motivation for development.

But the entire BiliBili has lost money, and all the money lost is not left. Boss Jia gave BiliBili nearly 500 million U.S. dollars last year, and now it’s all spent, let’s continue this year lion’s big mouth, directly required 1 billion US dollars in research and development funds, and saw that Boss Jia wanted to kick this guy out.

“Boss, we have a brand new technical idea!” Wang Xuan said excitedly, “We plan to develop a Chinese assembly language, let our brand new PCsystem, based on the Chinese assembly language to write, so that we can completely bypass Open all the patent barriers of Microsoft!”