Lao Li opened his mouth and was about to step forward and say something to Yu Ye. Yu Ye glanced at Lao Li from a hidden angle.

Although Lao Li didn't quite understand what it meant, he still held it back.

"General Manager Zhang, I would like to ask, can I read these cutting-edge academic journals and books? Now that I have been in the independent group for a long time, I feel a little disconnected from the outside world."

When Zhang Shutian heard this, he was secretly happy, because he was afraid that you have no weakness or appeal.

"What's your name, Mr. Zhang? I'm older than you. If you don't mind, just call me Brother Shutian. We are all brothers on the same front. If you want to see it, just come to our place and see it.

If anyone doesn't let you see it, Brother Shutian will take care of him!"

Zhang Shutian's attitude became a little more amiable, and he put his arm around Yu Ye's shoulders affectionately.

(In fact, Zhang Shutian had a font name. At that time, it was usually called a font name, but after searching for a long time, I couldn't find out what Zhang Shutian's font size was.)

Yu Ye Ye Ye already knew Zhang Shutian's thoughts. He glanced at Li Yunlong deliberately, and the helplessness he showed was almost overflowing.���coming

"Brother Shutian, let’s talk about this later. Brother, I really can’t leave."

Zhang Shutian was about to say something while the iron was hot, but Yu Ye waved his hand.

In this case, Zhang Shutian also understood that this is not the place to talk. Since he has left such a button here, he will have a chance in the future, and the chance will not be there yet. Small

"Brother Yu Ye, I heard when I was in our factory that you are a great expert in military industry. You have recently greatly improved the equipment level of the independent regiment.

I have a few questions to ask you."

Since now is not the time to recruit the industry directly, you can communicate more with the industry to deepen the impression and enhance understanding between the two parties, which can facilitate the work of recruiting in the future.

"Brother Shutian, tell me!"

Yu Ye also hit the snake and hit"Brother Shutian" with the stick. Yu Ye even put his arm on Zhang Shutian's shoulder.

This made Li Yunlong very anxious. Although he had worked with him for so long, he was familiar with Lao Yu's character. Sure, but he didn't expect that Zhang Shutian could get so close to Lao Yu in such a short period of time.

"Brother, our arsenal's process flow for barrel rifling has always had problems with low processing yield and low rifling accuracy.

I don’t know if you have any solution to this problem?"

After thinking for a while, Zhang Shutian planned to talk to Yu Ye about technical issues. This would not arouse the fear of the independent group, but also test how high Yu Ye's level was.

"This thing is simple!

Although it can't be done at the current level of the Independent Regiment, it can be easily done with the technical level of your military factory.

I guarantee that I can greatly increase the speed and quality of your gun barrel manufacturing."

"Brother, I would like to hear the details!"Zhang Shutian is obviously in high spirits.

"I guess your arsenal must still use the wire pulling method now, right?"

"Yes!"

Zhang Shutian nodded.

"It’s hard for you to still use such an ancient method.

Although our independent group also uses it, there is no other way.

Based on your technical level, I suggest you use the cold forging method."

Yu Ye took Zhang Shutian to the reception room of the regiment headquarters and sat down, and began to explain the technical points to Zhang Shutian.

"Cold forging?"

Zhang Shutian's mind is full of questions. Why haven't I heard of it?

Although I, General Manager Zhang, am not responsible for the specific manufacturing process, I have been the specific person in charge of the military industry for so many years. I still understand some basic technologies, so why haven't I heard of it? Have you tried the cold forging method you mentioned?

"Yes, cold forging.

After the seamless steel pipe has been drilled, reamed and specially cleaned, the blank is placed on a tungsten carbide shaft rod corresponding to the rifling, which has an externally engraved rifling ridge. The hammer gradually hammers the blank onto the mandrel from the outside inward, relying on material deformation to deform rifling on the inner surface of the barrel."

Yu Ye explained, while drawing a schematic diagram on paper with Zhang Shutian, and at the same time explaining some of the technical points to Zhang Shutian.

Yu Ye even asked Zhang Shutian what large machinery they currently have in their arsenal, and told Zhang Shutian that these machinery passed What method can be used to make rifling by cold forging?

Zhang Shutian's eyes kept bursting with surprise as he listened to Yu Ye's explanation. He had never thought that rifling could be forged in this way. Yes, this is a technology that was only developed in Germany in 1938. It is still in the confidentiality stage. Naturally, Zhang Shutian has no way of knowing about it.

"Brother Shutian, after these modifications, the speed of making rifling in your arsenal can be increased by at least three times. If your material level is up to standard, the quality rate will be greatly improved.

This processing method can make the material of the barrel more dense and the mechanical properties will be better.

Although the barrel processed by the cold forging method has no obvious advantages over other manufacturing methods in terms of performance of high-precision sniper rifles, it is used to process ordinary rifle and submachine gun barrels, and the processing speed is compared with other processing methods. The method can be called crushing."

Yu Ye put the schematic diagram he drew in front of Zhang Shutian, as if I had nothing to hide in front of Brother Shutian.

Zhang Shutian took these pieces of paper into his arms with great care. But it is a very important technological breakthrough!

Next, Yu Ye shared with Zhang Shutian some of his ideas on the daily management of the arsenal, from Taylor's scientific management theory to safety production regulations, from the formulation of technical standards to the construction of R&D systems, it can be said that management is superficial. I told Zhang Shutian all about it, but he didn't say anything about the real core. Even so, the light in Zhang Shutian's eyes didn't stop. He was so shocked when he saw Yu Ye's performance!

Yes, this guy is truly a talent!

He not only understands technology, but also understands management. He must find a way to poach him!

Nearly two hours have passed.

While Zhang Shutian was checking the time, Yu Ye took a sip of water. After being fooled for so long, the brigade commander could still crawl to the independent group, right

? What came to mind:"Captain Li, Political Commissar Zhao, and brother Yu Ye, this time I was entrusted by Chief Yan to visit you all for three purposes.

The first is to deliver the machine tools to the hands of brothers Yu Ye, which has been accomplished.

Second, I want to visit the Liaoyuan Arsenal of the Independent Regiment to see what else we can provide assistance in the World War II zone.

The third is to receive the president's order to register all military factories with equipment production capabilities in the World War II zone so that they can play a greater role in the united front and win glory for the nation!

So, do you think you can take me to visit the Liaoyuan Arsenal?"

The picture is poor, but the dagger appears.

There is both humanity and righteousness, both assistance and orders, and you can't help but refuse to obey!"

"The arsenal is an important military base of our 386th Brigade. Can cats and dogs just look at it?"

Far away, the familiar voice came from outside the regiment headquarters.

The core trio of the independent regiment felt reassured.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like