Magicraft Meister Part 4
3120 - - 82-19 New Technology Research Institute
On March 23, Jin, Reiko, Hope, Goh, and Rubina were still in .
Goh and Rubina participated in the design of a .
Jin was accompanying Arnold in various procedures and paperwork for the newly established <(=>), since Arnold was the head of the laboratory.
"Arnold, congratulations on your new position as head of the <>.
"I guess I should say thank you. To be honest, I'm at a bit of a loss.
"Well, there are people around me who used to be the head of the office, so you can count on them.
Jin said, and Arnold nodded.
"I agree. That's what this place is for."
Arnold remembered his former workplace ...... at the construction site of the evacuation base in the former Dinaric Kingdom and smiled at the difference.
"I hear we're going to get some vacation time, so maybe we can go climbing in the mountains nearby."
Arnold expresses such a hope.
< is basically a white office.
It's just that many researchers are so enthusiastic about their research that they push themselves too hard. .......
The structure of the <> is as follows.
Laboratory Head: Arnold
Secretary: Chelle
Assistant Director: Rasnat Heilbronn
Assistant to the director: Roar Eisker
Treasurer: Katjea
Office: Zora Himmel, Ciel Azure
Other members: Ena Kouki, Tiner Vito, Eila Siata, Groma Tolley, Krathos, Raghu Gutan, Kumir
These are the 14 members of ...... (12 members + 2 bodies?) The members are: (12 members + 2 bodies?).
There is a possibility that a few more members will join in the near future.
The laboratory is located in the same room of the and , which were originally adjacent to each other.
However, the walls of the two rooms have been removed and combined into one room.
In the new laboratory, there were heated discussions on the day of the inauguration, or even before the inauguration.
The discussion was about the design, or rather, the examination, of the < that Jin had requested.
The study of the specifications was almost completed on the first day ......19, and the detailed specifications were decided on the 20th.
And from the 21st, the concrete design was started here.
The result is .......
Two <<> are installed.
It was designed as a high-winged aircraft, with emphasis on stability.
It is 18 meters long, 18 meters wide, and 7 meters high (including fixed landing gear).
Capacity for 6 passengers.
The structural material is 64 light silver.
Maximum speed is over 400 km/h.
The details are given as ......, and a suitable aircraft is designed.
"Hmm, so this is the current design method."
"That's an interesting way of doing it."
"Interesting."
Jin was also interested in the world's most advanced design method of the .
And so were Goh and Rubina.
<
<, Jin is able to visualize blueprints in his mind.
The template is a design written down in Magi Crystals.
The template is then by the craftsmen and shared with them during the production process. Information is not exchanged via blueprints.
The contents of the design can be visualized on the <> which is managed by the old man, and can be shown to a third party for explanation or modification. It is like a DCAD.
It is similar to <> and Marikka's place.
Marikka is a direct disciple of Jin, so it is only natural that their methods are similar.
Now, how about the <>?
As one would expect, they do not have the skills to directly write the design image on the <>, so they need to work diligently.
In other words, <>.
Parts drawing, bill of materials, assembly drawing.
The specifications and the number of , including screws, are indicated in the <>.
All other parts are drawn on a <>.
From a small spring to a huge structural material.
If there are 1000 kinds of parts, more than 1000 parts drawings are needed. > is a drawing of the parts of a product, because some parts have complex shapes that cannot be described on a single sheet of paper.
> is a drawing of all the parts assembled together.
<> is also used when necessary.
If the drawing does not fit on a single sheet, it is drawn on several sheets.
Gough and Rubina were intrigued when they saw such a method for the first time.
But Jin was used to seeing this in modern Japan.
"Did they have a similar practice in the Kingdom of Dinar?"
Jin asked Arnold.
"Yes, they did. "Yes, I am sure that they had drawings. But I think the drawings were done by a special golem.
"Oh, yeah."
"Yes. It was a special golem, so it was highly functional, and it would check for interferences between parts.
Interference between parts.
For example, part A has a protrusion that interferes with the assembly of part B. If the assembly drawing is correct, the protrusion may interfere with the assembly of part B. If the assembly drawing is correct, the protrusion may interfere with the assembly of part B.
If you have drawn the assembly drawing properly, you will know it at that time. .......
In addition, when it is necessary to insert part D into the hole of part C, if the tolerance, i.e., the acceptable dimension error range ......, is not set properly, it is possible to have a mixture of combinations that can fit in and combinations that cannot fit in. If the tolerances, i.e., the allowable dimensional error range , are not set properly, some combinations can fit and some cannot.
The company said that a special magic brain would check for such defects.
"Eventually we would like to get rid of hand-drawn drawings," said Deputy General Manager Rusnert.
said Rasnat Heilbronn, Deputy General Manager.
* * * * * * *
"We have good news for you.
"Cachéa, is something wrong?"
Yes. ...... Actually, a vanadium mine has been discovered in the Nordic Confederation and it will be operational soon.
"Oh, and the cost of 64 light silver will go down as well.
But since Jin is donating the materials, there is little that needs to be purchased.
"I guess we should also wait a bit to calculate the production cost."
If the market price changes, the results of such calculations will be meaningless.
This is especially true when considering the assumption of mass production.
It would be several months before the market would actually be affected.
"Well then, let's experiment with the input/output characteristics of various engines as a preparation.
They decided to conduct the experiment that Goh had suggested the other day.
Jin was willing to cooperate in this project.
Goh and Rubina participated in the design of a .
Jin was accompanying Arnold in various procedures and paperwork for the newly established <(=>), since Arnold was the head of the laboratory.
"Arnold, congratulations on your new position as head of the <>.
"I guess I should say thank you. To be honest, I'm at a bit of a loss.
"Well, there are people around me who used to be the head of the office, so you can count on them.
Jin said, and Arnold nodded.
"I agree. That's what this place is for."
Arnold remembered his former workplace ...... at the construction site of the evacuation base in the former Dinaric Kingdom and smiled at the difference.
"I hear we're going to get some vacation time, so maybe we can go climbing in the mountains nearby."
Arnold expresses such a hope.
< is basically a white office.
It's just that many researchers are so enthusiastic about their research that they push themselves too hard. .......
The structure of the <> is as follows.
Laboratory Head: Arnold
Secretary: Chelle
Assistant Director: Rasnat Heilbronn
Assistant to the director: Roar Eisker
Treasurer: Katjea
Office: Zora Himmel, Ciel Azure
Other members: Ena Kouki, Tiner Vito, Eila Siata, Groma Tolley, Krathos, Raghu Gutan, Kumir
These are the 14 members of ...... (12 members + 2 bodies?) The members are: (12 members + 2 bodies?).
There is a possibility that a few more members will join in the near future.
The laboratory is located in the same room of the and , which were originally adjacent to each other.
However, the walls of the two rooms have been removed and combined into one room.
In the new laboratory, there were heated discussions on the day of the inauguration, or even before the inauguration.
The discussion was about the design, or rather, the examination, of the < that Jin had requested.
The study of the specifications was almost completed on the first day ......19, and the detailed specifications were decided on the 20th.
And from the 21st, the concrete design was started here.
The result is .......
Two <<> are installed.
It was designed as a high-winged aircraft, with emphasis on stability.
It is 18 meters long, 18 meters wide, and 7 meters high (including fixed landing gear).
Capacity for 6 passengers.
The structural material is 64 light silver.
Maximum speed is over 400 km/h.
The details are given as ......, and a suitable aircraft is designed.
"Hmm, so this is the current design method."
"That's an interesting way of doing it."
"Interesting."
Jin was also interested in the world's most advanced design method of the .
And so were Goh and Rubina.
<
<, Jin is able to visualize blueprints in his mind.
The template is a design written down in Magi Crystals.
The template is then by the craftsmen and shared with them during the production process. Information is not exchanged via blueprints.
The contents of the design can be visualized on the <> which is managed by the old man, and can be shown to a third party for explanation or modification. It is like a DCAD.
It is similar to <> and Marikka's place.
Marikka is a direct disciple of Jin, so it is only natural that their methods are similar.
Now, how about the <>?
As one would expect, they do not have the skills to directly write the design image on the <>, so they need to work diligently.
In other words, <>.
Parts drawing, bill of materials, assembly drawing.
The specifications and the number of , including screws, are indicated in the <>.
All other parts are drawn on a <>.
From a small spring to a huge structural material.
If there are 1000 kinds of parts, more than 1000 parts drawings are needed. > is a drawing of the parts of a product, because some parts have complex shapes that cannot be described on a single sheet of paper.
> is a drawing of all the parts assembled together.
<> is also used when necessary.
If the drawing does not fit on a single sheet, it is drawn on several sheets.
Gough and Rubina were intrigued when they saw such a method for the first time.
But Jin was used to seeing this in modern Japan.
"Did they have a similar practice in the Kingdom of Dinar?"
Jin asked Arnold.
"Yes, they did. "Yes, I am sure that they had drawings. But I think the drawings were done by a special golem.
"Oh, yeah."
"Yes. It was a special golem, so it was highly functional, and it would check for interferences between parts.
Interference between parts.
For example, part A has a protrusion that interferes with the assembly of part B. If the assembly drawing is correct, the protrusion may interfere with the assembly of part B. If the assembly drawing is correct, the protrusion may interfere with the assembly of part B.
If you have drawn the assembly drawing properly, you will know it at that time. .......
In addition, when it is necessary to insert part D into the hole of part C, if the tolerance, i.e., the acceptable dimension error range ......, is not set properly, it is possible to have a mixture of combinations that can fit in and combinations that cannot fit in. If the tolerances, i.e., the allowable dimensional error range , are not set properly, some combinations can fit and some cannot.
The company said that a special magic brain would check for such defects.
"Eventually we would like to get rid of hand-drawn drawings," said Deputy General Manager Rusnert.
said Rasnat Heilbronn, Deputy General Manager.
* * * * * * *
"We have good news for you.
"Cachéa, is something wrong?"
Yes. ...... Actually, a vanadium mine has been discovered in the Nordic Confederation and it will be operational soon.
"Oh, and the cost of 64 light silver will go down as well.
But since Jin is donating the materials, there is little that needs to be purchased.
"I guess we should also wait a bit to calculate the production cost."
If the market price changes, the results of such calculations will be meaningless.
This is especially true when considering the assumption of mass production.
It would be several months before the market would actually be affected.
"Well then, let's experiment with the input/output characteristics of various engines as a preparation.
They decided to conduct the experiment that Goh had suggested the other day.
Jin was willing to cooperate in this project.
You'll Also Like
-
All Beast Tamers: My beasts are all mythical!
Chapter 385 1 days ago -
Everyone has a golden finger, and I can copy
Chapter 379 1 days ago -
Pokémon: Rise of the Orange League
Chapter 294 1 days ago -
Zhan Shen: Mental illness? Please call me the God of Mystery!
Chapter 227 1 days ago -
Senior sister, please let me go. I still have seven fiancées.
Chapter 552 1 days ago -
I am in Naruto, and the system asks me to entrust the elves to someone?
Chapter 628 1 days ago -
As a blacksmith, it's not too much to wear a set of divine equipment.
Chapter 171 1 days ago -
Treasure Appraisal: I Can See the Future
Chapter 1419 1 days ago -
Immortality cultivation starts with planting techniques
Chapter 556 1 days ago -
The Lord of Ghost
Chapter 217 1 days ago