My Pet is a Snapping Turtle

  Chapter 449 Processing 50 pieces in one go

  Whether it is in front of the exhibition area of ​​Taishan Alloy Cutting Tool Group or Maqi Alloy Cutting Tool Group, a large number of people gathered, and more and more.

   It didn't take long, and the crowds were overwhelming.

  The biggest focus of this alloy cutting tool exhibition should be in these two places, a domestic alloy cutting tool company and a foreign company.

  In everyone's eyes, under a large number of cameras, two machine tools of Taishan Alloy Cutting Tool Group are working.

  The processed parts are consistent. For example, a high-temperature alloy bar is processed on that CNC lathe. Turning it into a delicate part requires a large machining allowance, which is a great test for tool wear.

   The time is one minute, and one minute passes.

  It's very lively here.

   "Which part is this?"

   "It's the eleventh part."

   "Oh my god, don't you need to change the knives?"

   "It seems that there is no plan to change the cutting tool. If you see it, the surface of the processed part is very bright, which means that the blade is still very sharp."

  “.”

  Seeing that parts are being processed one by one, but the tool has not been replaced, many people are very excited, especially those anchors, they have been live broadcasting.

   "Everyone, I can't believe it. This is the eleventh part that has been processed. Taishan Alloy Cutting Tool Group still has no plans to replace the cutting tool."

   This is a famous Internet anchor, holding a mobile phone holder, facing the mobile phone for live broadcast.

  He walked to the front of the CNC lathe, and after seeking the consent of the staff of Taishan Alloy Cutting Tool Group, he picked up the newly processed parts and faced the camera.

   "See, this is the eleventh part that has just been processed. The surface is very bright, completely mirror-like, and the processing quality is top-notch."

   There are many anchors like him, and the whole scene has become more and more exciting.

  The front of the exhibition area of ​​the March Alloy Cutting Tool Group was different, and there were waves of boos.

   This is the second time they stopped to change blades.

  After processing a total of five parts with the blade that was replaced last time, it was obviously not good, and there were traces of digging knives on the surface of the parts, which is an obvious processing defect.

   "Why do you need to change the blade again!"

   "Do you know that Taishan Alloy Cutting Tool Group has processed eleven parts in one go, but has not changed the blade."

   "Now the twelfth part has been processed, and the thirteenth part has been installed on the machine tool to start processing. I just came over from there."

   "My God, the knives of Taishan Alloy Knives Group are so powerful!"

  “.”

  Hearing such words, Zhu Xiangsheng was embarrassed for a while, and at the same time he felt a little unbelieving, so he was going to take a look.

   Finally squeezed through, and when he reached the two machine tools, he glanced at the processed parts, and his heart sank slightly.

Inside the door to see the door, the layman to watch the fun.

  Zhu Xiangsheng should be regarded as half an expert. When he saw that the processed parts were placed neatly and each part was beautiful, he knew something was wrong.

   "Mr. Zhu, you came here in person."

  Seeing Zhu Xiangsheng appearing in his exhibition area, of course Han Guang wanted to come over and give him a run for his money.

  Zhu Xiangsheng laughed, "Come and have a look, Mr. Han, how many times have you changed the blades?"

  Han Guangdao, "Should I change the blade? What kind of blade should I change? We haven't changed the blade yet."

what!

How is this possible.

  Zhu Xiangsheng said, "Mr. Han, are you kidding me? We have already changed the blade for the second time, but we have finished processing ten parts."

  Han Guang smiled and said, "We have finished processing the twelfth part, and the thirteenth part is being processed on the lathe."

  Zhu Xiangsheng had a look of disbelief.

Next to him was an internet celebrity anchor, holding a mobile phone holder, pointing the mobile phone at Han Guang and Zhu Xiangsheng, and said loudly, "Taishan Alloy Knives Group has never changed the blade, we have so many eyes watching, it's fake No."

   "Hey, in that video, the two of them are making a bet. Whoever loses will launch the domestic knife market."

   "The younger one is President Han of Taishan Alloy Cutting Tool Group, and the older buddy is the general manager of Yanguo District of March Alloy Cutting Tool Group."

   It turned out to be the two of them!

  A large number of cameras and many mobile phones live broadcasted were aimed at the two of them.

   Zhu Xiangsheng suddenly panicked.

  Han Guang has a confident face, full of confidence.

   "The processing of the thirteenth part is completed, and the installation of the fourteenth part begins."

   I don’t know who yelled this loudly. Everyone looked over and saw that the door of the CNC lathe was opened. The operator removed the machined parts from the machine tool and clamped a blank bar into it.

   There is still no intention of changing the tool. After the blank bar is installed, press the start button and start processing again.

   "The fourteenth part has already been processed!"

   "It's unbelievable. I haven't changed the blade all the time. I don't know where the limit is. How many parts can be processed with one alloy blade."

   Zhu Xiangsheng panicked even more when he heard these words and saw that the CNC lathe started processing parts again.

  Han Guang glanced at Zhu Xiangsheng with satisfaction, and reminded, "Mr. Zhu, I am willing to accept the bet, and then I can't renege on my debt."

  Zhu Xiangsheng's face turned a little pale, and the corners of his mouth trembled. He couldn't stay any longer, and returned to their own exhibition area in disgrace.

  Machining continues all the time.

   It didn't even stop at noon.

  The two parties agreed that each machine tool would process 50 parts. At ten o'clock in the afternoon, the CNC lathe of Taishan Alloy Cutting Tool Group took the lead in processing the 50th part.

  The lathe stopped, and Han Guang personally removed the processed 50th part from the lathe.

  Holding this part in his hand, he said loudly and happily, "Everyone, the 50th part has been processed. First of all, its appearance is still very beautiful, as bright as a mirror."

   After finishing speaking, he personally took the measuring tool to measure the size of this part, and then announced loudly, "All dimensions are qualified!"

   As soon as the voice fell, there was warm applause at the scene.

   "I'm so impressed, I didn't expect that our domestic knives are so powerful."

   "If I hadn't seen it with my own eyes, I wouldn't have believed it. A single alloy tool could process 50 high-temperature alloy parts in one go."

   "Looking at it this way, the blade hasn't worn out yet, so it's probably no problem to continue processing."

   "Unfortunately, the bet between them is that each machine tool can process 50 parts, and they failed to see where the limit of this black alloy blade is."

  “.”

  Everyone is talking about it.

  Han Guang put down the parts in his hands, took the tool that the worker took off the lathe, and put it on the tool inspection instrument. On the display screen, the alloy blade was magnified 100 times, and the condition of the blade edge was clear.

   Seeing the edge of this alloy blade, the scene became quiet, and there were bursts of gasps!

  The first update is here!

  (end of this chapter)