My Strength Does Not Allow Me to Low-key

Latest website: Now that we have this equipment, we can say that it is completely new and directly bypasses the barriers set up by the United States, Japan and Germany.

In the field of precision machining, we have made breakthroughs, but there is still the material aspect, we need to catch up.

In the field of materials, to be honest, unless it is military level.

In fact, in the field of ordinary civilian use, the gap between us and the United States, Japan and Germany is not particularly large.

At this time, that machine tool has basically finished processing the workpiece.

"Slap, slap, slap!"

The scene went silent, and suddenly there was a burst of applause like thunder.

Huang Haibin slapped his hands excitedly and looked around. Almost all the entrepreneurs who came with him at this time were very excited.

Even some people with weak emotional control ability have already reddened their eyes at this time.

Most of these entrepreneurs have studied abroad in the United States.

And many people have worked in American laboratories or R&D institutions.

They know best how far we are from the Americans in technology.

Let’s just talk about a scientific research experiment. Why do many international students who go to the U.S. choose to stay in the U.S. instead of returning to China?

Just because there are too few opportunities for results in China.

Then why are there few opportunities for domestic results to be produced?

Is it because the domestic scientific research environment is poor? This is only due to the software, and more reasons are in the hardware.

For example, this day you have a whim and an idea, and in order to verify the feasibility of your idea, you have to experiment.

But because no one has done this experiment before, and you designed this experiment from start to finish.

In this experiment process, it may involve the use of a lot of high-precision experimental equipment.

And these equipment, in the laboratory in the United States, it is very sufficient.

It can be said that as long as you apply, you can use it within a few days, or even you can use it multiple times.

And in the domestic laboratory, ha ha!

If you want to apply for an experiment, you have to submit a report and apply. If you have this kind of equipment, you may have to schedule it.

Because in front of you, there may be several groups of experimental teams waiting to use this equipment.

When it's your turn, the day lily may be cold.

In addition, if there is no equipment, then the Americans, if your superiors also approve your creativity, then he will approve the funding with a big hand.

Allow you to buy the experimental equipment you need.

If the equipment you need is not available on the market, he will approve you to use the laboratory machine tool to process the equipment you need.

Yes, many laboratories in the United States have such processing equipment, whether it is our scarce high-precision five-axis linkage machine tool or the latest top 3D printing equipment.

They are all available, and the equipment will be updated every year.

Because people know that when working to benefit one's things, one must first sharpen their tools.

In contrast to us, hehe, a piece of equipment costs millions. It is impossible for a research institute to buy such a piece of equipment because of your creative needs.

And many equipments are not available, even if you design the drawings yourself, you can't produce them.

Because there is no machine tool in the laboratory, you can't produce a piece of equipment that you need for the experiment according to your own imagination.

But in the U.S. it's fine.

Therefore, someone has made an assessment that the chance of scientific research personnel producing results in the United States is three times that in China.

This is also the main reason why many scientific researchers are reluctant to return to China once they go abroad.

There is really a gap between our scientific research environment and others, not only in software, but also in hardware.

But now that everyone sees this flexible processing equipment in front of them, everyone is finally listening.

With this device, we can also be willful.

When we do experiments in the future, if we encounter equipment that cannot be bought, we can also design our own and produce those special experimental equipment ourselves.

After all, the cost of self-developed and self-made is definitely much cheaper than the cost of purchasing special equipment from abroad.

The most important thing is to produce it yourself, which saves time.

"Everyone is satisfied with our Tiangong Type 1?"

Just when everyone was excited about the machine tool in front of them, suddenly a voice full of magnetism came to mind around everyone.

At this time, everyone saw that a tall, thin man with a big beard did not know when he appeared next to everyone.

His hair is messy, the beard on his face hasn't been shaved for many days, his upper body is a plaid shirt, and a pair of jeans underneath.

The whole person looks very sloppy, but for some reason, everyone does not feel very annoying.

Because everyone smelled a similar kind of breath from this person, this must also be a crazy science man.

"Haha, very satisfied."

"It's really shocking, we actually have such an amazing device."

"Really, this is definitely an epoch-making product!"

"With him, it means that we will have stronger aircraft and better submarines in the future..."

Everyone spoke in a rush, although they didn't know who this person was.

But everyone is not stupid. When everyone entered the factory of Xinghuo Technology, the company's security requirements were so strict, everyone saw.

But this guy, being able to stab him here, shows that this person's status in Xinghuo Technology is definitely not low.

Sure enough, the representatives of the Quanye Fund, who had been accompanying them at the stall where everyone was talking, also stood up with a smile at this time.

"I want to introduce everyone, this is Mr. Hu, CTO of Spark Technology!"

"Mr. Hu is also a crazy high-tech enthusiast, and he should have a lot of common language with you."

"If you have any problems or unsolvable problems, you can discuss with Mr. Hu, maybe Mr. Hu can provide you with a perfect solution!"

As soon as this representative said this, the entrepreneurs on the scene immediately became agitated.

The CTO of Xinghuo Technology, this is definitely a master in the technical field!

No wonder he asked like that before. At this time, everyone's curiosity about this Tiangong No. 1 could no longer be suppressed.

"What's the scope of this equipment? Is it a machine tool?"

"Does he use the flexible processing concept?"

"His ability should be more than that, right?"

For a time, all kinds of babbled questions were constantly being raised.

At this time, Mr. Hu also smiled and answered everyone one by one.

"Yes, from a conceptual point of view, this is also a processing machine tool."

"Moreover, what he adopted is indeed the concept of flexible processing. I think everyone should understand the benefits of such flexible processing."

"Compared with the current ordinary five-axis linkage machine tools, he has greatly reduced the requirements for materials, and the processing accuracy is no weaker than the top-level machine tools on the market."

"Our machining accuracy can even be controlled in X wire..."

As soon as this data was reported, everyone present couldn't help but take a breath.

This data can definitely be called a military level.

I am afraid that even the top processing companies in Japan and Germany use machine tools of this level.

"Moreover, our machine tool is divided into several types, which can solve various processing problems..."

As we all know, five-axis linkage machine tools can be divided into several categories, including vertical, horizontal, and cradle types.

These machine tools also respond to the needs of various different workpieces.

Vertical machine tools are mainly used to process workpieces used in large-scale machinery and equipment, such as cranes, cranes, and even large-scale workpieces on airplanes and ships.

Horizontal machine tools are mainly used to process small workpieces, such as automobile engine crankshafts, valve cover gaskets, small motors and other industrial equipment.

The cradle-type machine tool is the best one. It is mainly used for S-shaped processing, mainly for processing irregular-shaped metal workpieces.

And these metal workpieces are mainly turbofan blades of turbochargers, or S-shaped metal blades and so on.

The value of these metal workpieces is often very expensive.

In order to process different metal workpieces, these machine tools often adopt different designs, with different shapes and principles.

And the price of each type is different, especially the last type is the most expensive.

But for Tiangong No. 1, he does not have such troubles.

Because the robot arm is flexible and fixed, the robot arm can continuously adjust the angle of the workpiece during the machining process, which is convenient for the tool to process on the workpiece.

Therefore, in the past, it was necessary to redesign the machine tool to meet the processing conditions of different conditions.

But now only need to have such a machine tool, as long as you change a different type of robot arm, set up a different processing program system, you can complete very complex surface processing.

As a result, it is even more apparent that the Tiangong No. 1 cattle break.

At this time, talking about the rise, the CTO of Spark Technology, Mr. Hu, simply concealed it for everyone.

It's just that the technological content contained in this cover-up ~www.ltnovel.com~ is not generally high.

This time, he directly pushed another ‘machine tool’ up, but it was different from the previous one. This time it has five robotic arms.

Two are fixtures, the other is a processing robotic arm holding a knife, and the other is a robotic arm holding two nozzles, which should spray lubricating and condensing agents.

The last robotic arm, holding a lens like a searchlight, hangs over the head of the entire machine tool.

At this time, someone put a square metal iron ingot on the fixture, and then set the processing program on the machine tool.

Then a scene that made everyone dumbfounded happened.

The clamp clamped the iron ingot and sent it to the front of the robotic arm holding the cutter head.

And the cutter head held by the robotic arm this time is completely different from the machine tools seen in the past. It is not so much a cutter head as it is a drill bit.