Siheyuan: Concentrating on science and technology is the right way

In just a few minutes, Lin Weidong discovered the cause of the incident.

"There should be something hard, but relatively small, that fell into the machine, and it hasn't been taken out yet."

"That's why it was damaged again after Mr. Wu repaired it just now."

"Then is this easy to repair?" Deputy Director Li asked.

"This is a small problem. Now that we know the reason, we just need to disassemble the inside of the machine and find that thing."

"Disassemble the inside of the machine?" Deputy Director Li hesitated.

They repaired the machine before, but they were all repairing some minor problems.

Because these machines are all imported, if they are disassembled from the inside, I am afraid they will not be able to install them.

This is also the technical dilemma faced by the country, such as some engines.

Even if foreign countries send over the drawings, they may not be able to manufacture the engine according to the drawings due to technical limitations.

"Don't worry, since I dare to disassemble it, I can install it."

"But now we have to face another problem."

"What's the problem!" Deputy Director Li raised his heart that had just been let go.

(Activity time: January 1st to February 21th)

Chapter 43: Lin Weidong's Small Trial

"Because of the violent disassembly just now, some parts were slightly deformed." Lin Weidong glanced at Yi Zhonghai as he spoke.

"Then due to irregular operations, the angle of the parts was shifted during the reassembly process."

"So when the machine was turned on, some internal parts were forcibly broken." Then Lin Weidong glanced at Yi Zhonghai again.

"Yi Zhonghai!" Deputy Director Li gritted his teeth and looked at Yi Zhonghai.

Before, I swore that I found the problem and ensured that the machine was fine.

Unexpectedly, it was really the same as Wu Gong said, making this layman worse and worse.

"Deputy Director Li, I... I really didn't do it on purpose, I just wanted to repair the machine and reduce the loss of the factory. My intention is good." Yi Zhonghai said hastily.

"Hmph, I will settle accounts with you later." Deputy Factory Manager Li snorted coldly.

Although he wished he could directly strangle Yi Zhonghai to death, but now was not the time to talk about it.

The top priority is the machine.

"Weidong, can this be fixed?"

"Of course, when I disassemble the machine later, I will draw the damaged parts drawings."

"Then process the parts and replace them directly."

"Okay, Weidong, hurry up and do it, do you need help?"

"That's unnecessary!" Lin Weidong began to disassemble the machine.

Deputy Factory Manager Li was not talking either, for fear of disturbing Lin Weidong.

At this moment, Yi Zhonghai finally came to his senses.

Recalling the previous events, he wanted to slap himself directly, he didn't even know why he was so hot.

However, he didn't expect that after hearing that Lin Weidong had become an engineer of a steel rolling mill, his mentality was a little abnormal.

At the same time, Lin Weidong has already removed many parts from the machine.

Seeing Lin Weidong's skillful movements, it was only at this time that Yi Zhonghai realized the gap between himself and the engineer.

When Lin Weidong disassembled the machine, he also put aside the parts that needed to be replaced.

Soon, the entire machine was almost dismantled by Lin Weidong.

Wu Gong and the others watched intently, because it was the first time for even them to see the machine dismantled like this.

These machines are usually very precious, so how could they be handed over to them for practice.

Suddenly, when the machine was disassembled to the innermost part, Lin Weidong saw a small screw in the corner.

Lin Weidong picked up the screw, which was full of traces of gear crushing.

Obviously, it was this screw that caused the machine to malfunction.

"Strange, it turned out to be a screw." Looking at the screw in his hand, Lin Weidong was a little puzzled.

"How is Weidong? Did you find anything?" Deputy Director Li asked quickly.

"That's why the machine malfunctioned." Lin Weidong handed over the screw.

"It's just why there are screws falling in, it shouldn't be."

Deputy Factory Manager Li also reacted: "Who used this machine just now."

When everyone heard this, they all looked at Jia Dongxu.

"Okay, Jia Dongxu, how dare you intentionally damage the machine." Deputy Director Li looked at Jia Dongxu viciously.

"It wasn't me, Deputy Director Li, I didn't break the machine." Jia Dongxu shook his head hastily.

If it was his fault, he would be dead.

"Factory manager, I will report." Among the workers, someone suddenly shouted: "I report that it is Jia Dongxu who broke the machine."

"The factory issued a punishment to Jia Dongxu just now. Jia Dongxu was very dissatisfied with the result of the punishment, and directly smashed the tool on the machine."

"This screw may be the one that fell in."

"Guo Daji, you are talking nonsense. I didn't break the machine. It's just a coincidence." Jia Dongxu shouted.

Lin Weidong also looked over, thinking it was a trick, but he didn't expect it to be a character in the original novel.

"Jia Dongxu, don't try to deny it, we all watched it just now, don't you think so?"

"That's right, it's Jia Dongxu."

"Okay, Jia Dongxu, you're fine." Deputy Director Li said through gritted teeth.

Today he really opened the eyes of Yi Zhonghai, the master and apprentice.

"Deputy Director Li, listen to my explanation..."

"You don't need to explain. Since you are dissatisfied with the punishment issued by the factory, then I will discuss this matter with other leaders."

Hearing this sentence, Jia Dongxu sat down on the ground, knowing that he was going to die.

Then Jia Dongxu looked at Yi Zhonghai.

"Master, please help me to intercede, I am willing to accept the previous punishment."

However, Yi Zhonghai was about to scold in his heart now, and was willing to accept the punishment, so why did he go so early.

He didn't even know that the machine was broken by Jia Dongxu. If he hadn't broken the machine, there would be so many things in the future.

But at the thought of counting on Jia Dongxu for retirement.

So Yi Zhonghai said, "Deputy Director Li..."

"Shut up for me, you haven't finished dealing with your own affairs yet."

Well... Yi Zhonghai quickly shut his mouth.

"Okay, just make these damaged parts." At this time, Lin Weidong had an extra stack of drawings in his hand.

And Wu Gong and those technicians looked at Lin Weidong in shock.

After studying for so long, they failed to draw detailed drawings of these parts.

As a result, Lin Weidong just took a look, and with the help of some simple tools, he drew it freehand.

And every scale seems to have been carefully measured.

What puzzled them was that several of the drawings seemed to be different from the parts in the machine.

(Activity time: January 1st to February 21th)

Chapter 44: Yi Zhonghai completely breaks the defense

"Director Li, just find someone to process these parts." Lin Weidong said with a smile.

"Okay, I'll arrange it right away." Deputy Director Li nodded quickly.

The seventh-level engineer really lived up to his reputation. The machine was all smoked, but it could still be repaired.

"Processing parts!" Yi Zhonghai was also moved in his heart.

"Deputy Director Li, leave this to me, and give me a chance to redeem myself." Yi Zhonghai said hastily.

"You..." Deputy Director Li was really scared of Yi Zhonghai.

"Deputy Director Li, can you still worry about me when it comes to processing parts? After all, I am the only eighth-level fitter in the factory."

"This... well, I will give you one last chance."

"If you can't even process the parts properly, you will be punished for both crimes." Deputy Factory Director Li handed over the drawings to Yi Zhonghai.

"Deputy Factory Manager Li, wait a moment, it will be ready soon." Yi Zhonghai took the blueprint and walked towards the machine next to him.

"Good luck!" Lin Weidong smiled.

The blueprints he drew were not so easy to process.

Every part has high requirements for precision.

If it is under normal circumstances, the eighth-level fitter should have no problem processing these parts, and the success rate is also guaranteed.

But after Yi Zhonghai went through this blow, especially when he was repairing the machine just now, his hands trembled uncontrollably.

If we forcefully process these parts now, the result can be imagined.

Of course, the accuracy requirements of these parts do not have to be so high.

But Lin Weidong did it on purpose, because he knew without guessing that Yi Zhonghai, who just made a big mistake, would rush to process these parts.