Siheyuan: I can simplify skills

Xu Yang wrote a series of straight characters on the table with his fingers.Calligraphy skills can be learned directly.

Calligraphy: Getting Started (0/200)

After getting started, Xu Yang had many more writing techniques in his mind. At this time, if he was asked to write, it would be completely different from before.

After getting started with calligraphy, Xu Yang did not continue practicing.You can't continue practicing this, otherwise it will be too conspicuous.Xu Yang would make others suspicious if he wrote a few words.

All other technologies can be justified.But many people in the neighborhood know how well Xu Yang writes.For example, the third uncle Yan Bugui taught Xu Yang Chinese before.The characters on the predecessor are so artistically written that most people wouldn't recognize them.

Now if Xu Yang writes calligraphy that is comparable to that of a calligraphy master, what will others think?No one in the courtyard had seen Xu Yang practicing calligraphy.

Therefore, Xu Yang had to at least pretend, practice calligraphy at home, and then gradually improve his calligraphy skills.This is considered safe.

At the factory, the improvement team continued to improve the machine tools while continuing to process special-shaped workpieces.Now Zhao Xiangdong and Guo Dapizi can process special-shaped workpieces independently.Basically it can meet the needs of key units.

But a new batch of special-shaped workpieces arrived in a workshop.

"Xu Yang, come here and take a look. The precision requirements for this batch of special-shaped workpieces are even higher. The processing is also more complicated. Do you think we can handle it?" Director Guo walked in.

Chapter 66

Xu Yang took over the design drawings and parameter descriptions of the special-shaped workpiece, and immediately frowned, and the accuracy requirements were greatly improved.Even with the improved machine tools now, there is no absolute certainty that it can be processed.

"How is it?" Director Guo wanted to hear Xu Yang's affirmative answer.

"Even if our improved machine tools are used to process these special-shaped workpieces, and I operate it, the pass rate will not exceed [-]%. It is a pass rate, not an excellent rate." Xu Yang said.

"In other words, there is still a [-]% chance that qualified workpieces can be processed." Director Guo said.

"I can only say that it can be processed. In fact, the pass rate may be less than [-]%." Xu Yang did not dare to finish his sentence.

"Is there any way to improve the pass rate?" Director Guo asked.

"To completely transform machine tools, we almost have to redesign and manufacture them. This is a bit difficult." Xu Yang said.

"Then do you have any solution?" Director Guo said.

"Director Guo, I am just a fitter, not an engineer. Nor am I an expert in this field." Xu Yang said with a wry smile.

"But you can improve the machine tools imported from Damao in our factory. Many expert engineers cannot do these things. Xu Yang, this batch of workpieces is very important. If you can process them, you will have made a great contribution." Director Guo said.

"After all, I have never learned any knowledge about mechanical design, so I need to spend a few days studying it systematically, but I can't buy these professional books. I hope they can be provided to me. Although I have an idea, it can't be realized. Come out." Xu Yang said.

"I'm going to report to Secretary Yang." Director Guo immediately ran to the factory office.

Factory office.

Secretary Yang saw Director Guo coming and quickly asked Xu Yang what did he say?Can he process it? "

"Xu Yang said we are not very sure. We need to re-calculate the machine tools, and transformation alone is not enough." Director Guo explained the situation vividly.

"Okay, I'll contact the above to see if I can provide some convenience to Xu Yang." Secretary Yang said.

Secretary Yang called the senior leader again and explained the situation.

The senior leader immediately contacted the most powerful mechanical university in the 49 cities, and then quickly made a call.

"I have already contacted the Mechanical Department of Qingda University. Xu Yang can go to 26 to borrow some internal materials. In addition, if you encounter problems, you can ask the professors of the Mechanical Department for advice." The leader said.

"Since Qingda University's Mechanical Department is engaged in this, why not ask them to help us design machine tools?" Secretary Yang asked.

"Their tasks are very heavy. Now every industry is trying to make up for its previous debts. Besides, they also know what kind of machine tools we need." The big leader sighed.

Since Mao withdrew experts, all walks of life almost came to a standstill. Later, they relied on their own experts to recover bit by bit.The professors at Qingda University cannot control everything.Matters at the steel rolling mill still have to be resolved by the steel rolling mill itself.

Xu Yang went to the Mechanical Department of Qingdao University on the same day.

In his previous life, Xu Yang had never studied in such a good university.

Qingda University has a lot of internal information, which was obtained through various channels with great difficulty.All extremely precious.Generally speaking, he will not be loaned out. Xu Yang can come here because the big leader has done his job.

"Are you Comrade Xu Yang? I am the director of the office of the Department of Mechanical Engineering, and my surname is Ma." A man wearing black-rimmed glasses received Xu Yang.

"Hello, Director Ma. I'm from the steel rolling mill. I want to check some information with you." Xu Yang said.

"Your steel rolling mill is quite creative. It's a good idea to be able to design and manufacture machine tools yourself. You are on the production line and know best what kind of machines workers need. The machines you design and manufacture yourself are definitely the most suitable for your own use. ." Director Ma said.

Director Ma arranged for Xu Yang a place to live and some meal tickets in the canteen, as well as a library card. With this library card, he could enter the reference room of the Mechanical Department.

After Xu Yang entered the data room, he was a little dumbfounded. There were very few Chinese materials in it, and many of them were in foreign languages.There are many in Russian, but the ones in English are not good either, and there are also some in German and French.Because they are all original materials, many of them have not yet been translated.

Although Xu Yang went to college in later generations and passed both CET-[-] and CET-[-], what was the use of that?I basically don’t know the professional vocabulary.I can’t quite understand it even if I read the original English version.Not to mention Russian and other languages.However, there are reference books in the reference room.But when looking up words one by one, even if Xu Yang went to a university here, he could not finish reading a professional book.

With great difficulty, I found some translated information in the reference room.But many of them cannot understand it at all due to lack of professional knowledge.

Xu Yang could only try to read some understandable professional books.I also read a Russian textbook.I bit the bullet and read the Russian textbook.

There were many students and teachers in the reference room to look at the information. People in this era were really serious about studying, and no one paid any attention to Xu Yang.No one would come to ridicule Xu Yang, and no one would come to drive Xu Yang out.Everyone is like a sponge trying to absorb knowledge.You know, many college students coming out of this era are able to stand on their own as soon as they come out.

Xu Yang also tried his best to stay in the reference room. Except for meal time, Xu Yang stayed in the reference room until the reference room closed in the evening.Then I returned to my residence, and as soon as I lay down on the bed, I fell asleep through meditating on Xingyi Quan.

I woke up early the next morning and was busy checking the system panel.

Russian: Not beginner (0/100)

Mechanical design: not yet started (0/100)

This time Xu Yang was in trouble, which one should be simplified first?

Simplifying mechanical design can quickly improve mechanical design skills. Maybe with mechanical design skills, Xu Yang can directly design machine tools.But Xu Yang felt that mechanical design skills alone might not be enough.In addition to mechanical design, you also need to understand machine tools and so on.This requires reading more professional information.Xu Yang does not need to read professional materials in all languages, as long as he digests the Russian version of professional materials, it may be enough.

In this way, Russian is a must-learn.

After much deliberation, Xu Yang decided to simplify his Russian skills first.

"Russian skills are being simplified...Simplified successfully...Russian skills → Copy 33 Russian letters."

Xu Yang had already copied the 33 Russian letters into his notebook yesterday.Now just take it over and copy it.

I just copied it three times.

The skill then becomes entry-level.

Russian: Beginner (0/200).

At the introductory stage, reading ordinary simple books is no longer a problem.But it is naturally not enough to read professional books.

Xu Yang continued to copy 33 Russian letters.You don't have to look at it now, you can write it silently.

After ten minutes.

Russian language skills have improved again.

Russian: Proficient (0/300).

This time, Xu Yang had no problem reading Russian literature books.But reading professional books is still very difficult.In addition, Xu Yang’s mechanical knowledge has not yet begun, making it even more difficult to read professional books.

Therefore, Xu Yang continued to copy 33 Russian letters.

While copying Russian letters, Xu Yang seemed to hear someone whispering in Russian from time to time.Sometimes it seemed like a lot of people were whispering in my ears in Russian.

an hour later.

Russian language skills finally improved to proficiency.

Russian: Proficient (0/1000).

At this time, reading professional books is not a problem.

But Xu Yang was still ready to continue improving his skills after three hours.

My Russian language skills have only improved to a minor level.

Russian: Small success (0/10000).

enough!Xu Yang is not planning to become a master of Russian. A minor level is enough.

At this time, Xu Yang felt a strong sense of hunger because he had not eaten breakfast or lunch.Russian letters already filled two notebooks.

Fortunately, Xu Yang carried a lot of notebooks, otherwise he would not have any notebooks to use when he went to the reference room later.

I ran to the canteen and bought three steamed buns and ordered two dishes.Just eat it with big mouthfuls.After eating, I ran to the reference room.

This time I went over and picked up the Russian materials and started reading them.

Director Ma happened to come to the reference room and felt strange when he saw Xu Yang flipping through Russian documents.

"Can you understand this information?" Director Ma asked.

"I can understand Russian, but I can't understand the professional knowledge in it. I have to learn slowly." Xu Yang said.

Director Ma was still very surprised by Xu Yang. A fitter could actually read Russian professional books. This was amazing. Many college students in the mechanical department may not be able to understand it.

"Then take your time and watch." Director Ma nodded.

Xu Yang specially selected those relatively thin Russian professional books.Now I can understand it and know which ones are basic books and which ones are more complicated.

At his current level, naturally he can only look at these more basic technical information first.

While Xu Yang was flipping through the books, some unsimplified skills appeared on the virtual panel.When the data room closed at night, Xu Yang returned to his residence and found that there were four more uninitiated skills on the panel.

Electrical Engineering: Not yet started (0/100)

Metal materials: not yet started (0/100)

Tool preparation: not yet started (0/100)

This tool is not an ordinary tool, but a tool from a machine tool shop.

Bearing preparation: not yet started (0/100)

These skills will be related to machine tool design.

Xu Yang had a headache. Simplifying one skill a day and adding mechanical design would take five days.Not to mention improving these skills.

Originally, Xu Yang was planning to go hunting in the mountains on Sunday.Now I can only postpone the hunting time.

Xu Yang was not prepared to go back so soon and had to stay here for a while.Lest his skills improve in the future and his stay is too short, which would be unjustifiable.

With the time spent in the Mechanical Department, he will be able to find reasonable excuses for any major improvement in any aspect in the future.

On the morning of his third day in the Mechanical Department, Xu Yang improved his mechanical design skills.

"Mechanical design is being simplified...Simplified successfully...Mechanical design → draw perspective drawing."

This perspective is not a general perspective, but a perspective of a workpiece given by the system.